PCD/PCBN/CVD Diamond Precision Laser Cutting Machine

Product Specification

Quick Details

Application: Laser Cutting, PCD, PCBN materials and composite, PCD oil cutters, mining cutters

Condition: New

Laser Type: YAG

Applicable Material: Crytal

Cutting Thickness: 8-12mm

Cutting Area: 200*300mm

Maximum Cutting Speed: 500mm/min

CNC or Not: Yes

Cooling Mode: Water Cooling

Control Software: DSP Control System

Graphic Format Supported: AI, DST, DWG

Place of Origin: Zhengzhou, Henan, China (Mainland)

Brand Name: RJ

Model Number: LY-GP23

Certification: CE, ISO

After-sales Service Provided: Engineers available to service machinery overseas

Name: High precision pcd laser cutting machine

Cutting depth Max: 8-12mm

Kerf width: 0.05-0.12mm ≤0.13 mm

Suggestion speed: higher and equal to 120mm/min

Cutting area: 200m *300mm

Max chamfering angle: 30°

The whole machine output: 12KW

Size: 1840mm(L) x 700mm(W) x 1562mm(H)

Weight: about 500kg

heat influence range: ≤0.05 mm

Repeat positioning accuracy: 0.001mm

The largest load: 15kg

Packaging & Delivery

Packaging Details: strong wooden cases

Delivery Time: 30-50 working days

Product Description PCD Diamond Precision Laser Cutting Machine

PCD(superhard materials) laser cutting machine

LY-GP23 diamond precision laser cutting machine,Double - condenser cavity, double rod (YAG crystal), three lights (pulse xenon lamp), three-power supply model.

The laser oscillates in a resonant cavity and outputs 1064nm wavelength laser, and then the laser is stabilized by another concentrator.

1, Properties

1, high efficiency and speed, cutting lines clean, no cracks, maximum material savings;

2, mainly for PCD, PCBN, PCD and PCBN composite,

CVD diamond, single crystal diamond, carbide, ceramics, silicon disc and other

cutting, hole drilling, marking and engraving work.

3, Maximum cutting depth: PCD sheet materials for 5 mm with single face cutting (single way) PCBN materials and carbide materials bigger than this.

Double face cutting depth at PCD sheet materials for 10mm single way .

4, kerf width: 0.05 ~ 0.12 (mm);

5,Suggesting PCD Cutting speed and kerf width: 1.6mm thick PCD cutting speed:>/=130mm/min, kerf width: </=0.12mm, 2.0mm thick PCD cutting speed:>/=90mm/min, kerf width:</=0.14mm
6, Cutting area: 200mm x 300mm
7, The maximum chamfering angle:30 °

8, The whole machine output: 12KW

9, Size: 1840mm(L) x 700mm(W) x 1562mm(H), Weight: about 500 kg.

2, Type(Total 2 types)

1, Single beam tube type used widely for laser cutting PCD/PCBN discs etc.

2, Double beam tube.type used for oil /mining PCD cutters cutting and other hard cutting materials.(diamond thickness at 2.5mm Max) etc.

3, Structure

1, laser host system;

2, laser power system;

3, the laser focus and CCD monitoring system;

4, automation control systems;

5, laser cooling system.

6, computer control systems and cutting special software drivers;

Automate the entire process of laser cutting systems through a combination of the above. For CVD, such as CVD composite sheet

Cutting to achieve narrow kerf (0.1-0.14), with fast, smooth and small kerf taper

And this device can also be used for cutting ceramics and other materials.

It is the non-conducting materials best cutting solution !!!

4, Laser technology parameters

1. Laser wavelength: 1064nm

2. Crystal Nd: YAG extinction ratio ≥32db

3. The maximum laser output pulse energy: ≥100J

4. Laser pulse repeat frequency: 1-300Hz (adjustable)

5. Laser pulse width: 100 ~ 120μs (adjustable)

6, the laser output power: 90W ~ 100W (optional )

7. Beam Divergence: ≤15mrad

8. Energy instability: ≤ ± 2.5%

9. Laser day continuous working time: Above 24h

5, Technical parameters of laser power

Laser power consists of the main circuit, trigger circuit, pre-ignition circuit, control circuit, Paul

Protection circuit, frequency, pulse width continuously adjustable. The specific indicators are as follows:

1. Input power: three-phase five-wire 380V ± 5% 50Hz

2. Repetition frequency: 1-300Hz

3, the maximum charge voltage: 1800V

4, the maximum pulse energy: 30-200J

5, microprocessor control interface

Programs can be edited to cut any designs you want, no matter for straight, curved, arc lines, you can all do it !