Payment Terms | L/C, T/T, D/A, D/P, Western Union |
Supply Ability | 200000 sets/month |
Delivery Time | 15-21 days |
Packaging Details | box + maste carton + pallet |
Dia (mm) | Two way: DN8-DN32, Three way: DN8-20 |
Work Pressure | 150 psi / 10bar / PN10 / 1.0 Mpa |
Work current | <80 mA |
Voltage | DC5V / DC12V |
Power | less than 2W |
Torque | 2NM |
Open/close time | < 7 seconds (2 way); <13 seconds (3 way) |
Product name | straight heating valves |
Brand Name | Runpaq |
Model Number | 20P1D-T3-15 |
Certification | CE |
Place of Origin | China |
View Detail Information
Explore similar products
6NM Electric Zone Valves, DC5V Central Heating Diverter Valve
Baseboard Radiant Heating Brass Zone Heating Valves 2.5 NM Torque DN8
Electric 2NM Zone Heating Valves DN8 Brass Central Heating With Actuator
Underfloor Heating Systems Intelligent Zone Heating Valves 3 Way IP65 Protection
Product Specification
Payment Terms | L/C, T/T, D/A, D/P, Western Union | Supply Ability | 200000 sets/month |
Delivery Time | 15-21 days | Packaging Details | box + maste carton + pallet |
Dia (mm) | Two way: DN8-DN32, Three way: DN8-20 | Work Pressure | 150 psi / 10bar / PN10 / 1.0 Mpa |
Work current | <80 mA | Voltage | DC5V / DC12V |
Power | less than 2W | Torque | 2NM |
Open/close time | < 7 seconds (2 way); <13 seconds (3 way) | Product name | straight heating valves |
Brand Name | Runpaq | Model Number | 20P1D-T3-15 |
Certification | CE | Place of Origin | China |
High Light | 2NM Zone Heating Valves ,DN8 Zone Heating Valves ,central heating zone valve |
Electric zone heating valves, auto heater control valve by brass ball valve with actuator
Product Description
Typically, the heating systems with zone valves, will be installed with two or more zone valves (usually but not always located close to the heating boiler) and a single circulator pump (usually located on the return end of the hot water piping close to the heating boiler).
Features
1. Extreme long service life span ;
2. Manual Override, the valve can be operated when power failure;
3. Mini dimension and position indicator
4. Good sealing performance, IP65 enclosure
Application
Advantages
No. | Ours | Normal products |
Valve shaft seal | Quadruple seals | Dual seals |
Nut seal | Auto super anaerobic glue coating, Consistent torque tightening | Manual anaerobic glue, unevenly, non consistent torque tightening |
Seal between valve body and housing | Seal groove | none |
Torque | Smoothly and light | Heavy, non consistently |
Drainage | Yes | none |
Technical data
Model | 20P-1.0D |
Work Amp (mA) | Max 80 |
Protection | IP65 |
Power (W) | <2 |
Operate Pressure (Mpa) | PN10 |
Torque (NM) | 2 |
Dia range | DN8-32 (Straight); DN15-20 (Tee, three way) |
Open/close (S) | Straight: < 7s; Three way: <13s |
Work volt. (V) | DC3-6V, DC12V |
Media temp (℃) | 0-90 |
Control | CR01, CR02, CR05 |
Valve body material | Connection port | Diameter | D | L | H | W |
(mm) | (Kg) | |||||
Brass | Both female thread full diameter | DN8 | 8 | 46 | 31 | 0.232 |
DN10 | 8 | 46 | 31 | 0.231 | ||
DN15 | 15 | 57 | 38 | 0.308 | ||
DN20 | 15 | 66 | 38 | 0.389 | ||
DN25 | 20 | 72 | 47 | 0.478 | ||
3-way vertical | DN15 | 12 | 63 | 49 | 0.31 | |
DN20 | 15 | 66 | 53 | 0.367 | ||
Female-male thread | DN15 | 15 | 63 | 38 | 0.307 | |
DN20 | 15 | 66 | 38 | 0.337 | ||
DN32 | 20 | 76 | 50 | 0.569 | ||
Both male thread | DN15 | 15 | 68 | 38 | 0.299 |
Wiring options
1. Connecting SW to OPEN , the valve opens , getting the position ,automatically power off, the valve remain fully open position
2. Connection SW to CLOSE , the valve close , getting the position ,automatically power off, the valve remains side passes position(fully closed)
1. Connecting SW to OPEN, the valve opens , getting the position ,automatically power off, the valve remain fully open position
2. Connection SW to CLOSED, the valve close , getting the position ,automatically power off, the valve remains side passes position (fully closed)
Note: AC24V/AC220V can only be used for 50K series electric valves
1.Connecting SW, the valve opens , getting the position ,automatically power off, thevalve remain fully open position
2.Disconnecting SW, the valve close , getting the position ,automatically power off, the valve remains side passes position (fully closed)
Note:When power is DC voltage and Red Wires is “+”,Blue wire is “—”
1. SW connecting, the valve open, getting the position and the power off automatically, the valve remains fully open/close position
2. SW disconnecting, the valve close, getting the position and power off automatically, the valve remains fully open/close position
1. Connecting SW and OPEN, the valve opens, getting the position green wire output the OLS signal, the controller tests the signal OLS, connect SW to STOP, the valve stops and remains fully open position
2. Connecting SW and CLOSE, the valve close, getting the position red wire output the CLS signal, the controller tests the signal CLS, connect SW to STOP, the valve stops and remains fully close position,
Note: Please make sure the signal wires "red", "black" and "green" be connected at first, then connect the power wires " yellow" and "blue".
Factory show
Company Details
Business Type:
Manufacturer,Agent
Year Established:
2009
Total Annual:
30000000-50000000
Employee Number:
100~200
Ecer Certification:
Active Member
We're a national key high-tech enterprise serving in fields of new energy management system and equipment, main services include: HVAC central air-conditioning and cold storage, solar distributed energy & regional energy, flow & energy management. We have integrative certification of ... We're a national key high-tech enterprise serving in fields of new energy management system and equipment, main services include: HVAC central air-conditioning and cold storage, solar distributed energy & regional energy, flow & energy management. We have integrative certification of ...
Get in touch with us
Leave a Message, we will call you back quickly!