Payment Terms | T/T |
Supply Ability | 10000 months |
Delivery Time | within 15 days |
Packaging Details | Inside: box, output side: carton |
Product name | VFD inverter |
Type | Variable frequency inverter |
Protection Level | IP65 |
Cooling mode | heat sink |
Input | 380v three phase |
Power | 0.75kw/1hp |
Weight | 2.5KG |
Size | 28*18*23cm |
Brand Name | ZONCN |
Model Number | Z5400A01D5K-BF |
Certification | CE |
Place of Origin | China |
View Detail Information
Explore similar products
Z5400A03D7K-BF High Protection Level Inverter 380v 3.7kW Variable Frequency
220v 380v Vfd Variable Frequency Drive 0-400Hz IP54 IP65 protection
Heavy Load Equipment High Protection Level Inverter 220v 0.75kw 1.5kw 2.2kw
380v 3.7KW Inverter Frequency Drive IP65 High Protection Level
Product Specification
Payment Terms | T/T | Supply Ability | 10000 months |
Delivery Time | within 15 days | Packaging Details | Inside: box, output side: carton |
Product name | VFD inverter | Type | Variable frequency inverter |
Protection Level | IP65 | Cooling mode | heat sink |
Input | 380v three phase | Power | 0.75kw/1hp |
Weight | 2.5KG | Size | 28*18*23cm |
Brand Name | ZONCN | Model Number | Z5400A01D5K-BF |
Certification | CE | Place of Origin | China |
High Light | 220v Variable Frequency Inverter ,380v Variable Frequency Inverter ,Pump Variable Frequency Inverter |
Variable Frequency Inverter 0.75kw 1.5kw 2.2kw 3.7kw 220v 380v VFD For Pump
Z5000-BF Series of inverter is ZONCN's high protection series, which are widely used in heavy pollution, bad enviroment, for example, dust, damp, dirty, etc. It also can be mounted directly on the motor. This inverter applies in the pump a lot. It built-in EMC filted, built in PID control, have analog input termnials 0-10v and 4-20mA. Powers range from 0.75kw to 160kw.
ITEM | ZONCN Z5000-BF Series VFD Inverter | |
Standard functions | Control mode | Sensorless flux vector control (SFVC) |
Voltage/Frequency (V/F) control | ||
Maximum frequency | Vector control: 0–320 Hz | |
V/F control: 0–3200Hz | ||
Carrier frequency | 1 kHz–16 kHz | |
The carrier frequency can be automatically adjusted based on the load features. | ||
Input frequency resolution | Digital setting: 0.01 Hz | |
Analog setting: maximum frequency x 0.025% | ||
Startup torque | G type: 0.5 Hz/150% (SFVC); | |
P type: 0.5 Hz/100% | ||
Speed range | 1:100 (SFVC) | |
Speed stability accuracy | ± 0.5% (SFVC) | |
Overload capacity | G type: 60s for 150% of the rated current, 3s for 180% of the rated current. | |
P type: 60s for 120% of the rated current, 3s for 150% of the rated current | ||
Torque boost | Fixed boost | |
Customized boost 0.1%–30.0% | ||
V/F curve | Straight-line V/F curve | |
Multi-point V/F curve | ||
N-power V/F curve (1.2-power, 1.4-power, 1.6-power, 1.8-power, square) | ||
V/F separation | Two types: complete separation; half separation | |
Ramp mode | Straight-line ramp | |
S-curve ramp | ||
Four groups of acceleration/deceleration time with the range of 0.0–6500.0s | ||
DC braking | DC braking frequency: 0.00 Hz to maximum frequency; Braking time: 0.0-36.0s; | |
Braking action current value: 0.0%–100.0% | ||
JOG control | JOG frequency range: 0.00–50.00 Hz | |
JOG acceleration/deceleration time: 0.0–6500.0s | ||
Onboard Multiple preset speeds | It implements up to 16 speeds via the simple PLC function or by input(X) terminal states | |
Onboard PID | It realizes process-controlled closed loop control system easily. | |
Auto voltage | It can keep constant output voltage automatically when the mains voltage changes. | |
regulation (AVR) | ||
Over-voltage/ | The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to over-voltage/over-current. | |
Over-current stall | ||
control | ||
Torque limit and torque control | It can limit the torque automatically and prevent frequent over-current tripping during the running process. | |
Instantaneous stop doesn’t stop | The load feedback energy compensates the voltage reduction so that the AC drive can continue to run for a short time. | |
Rapid current limit | It helps to avoid frequent over-current faults of the AC drive. | |
High performance | Control of asynchronous motor is implemented through the high-performance current vector control technology. | |
Timing control | Time range: 0.0–6500.0 minutes | |
Communication methods | RS485 | |
Running command channel | Given by the panel, control terminals, | |
Serial communication port, can be switched by many ways | ||
Frequency source | 10 kinds of frequency source, given by | |
Digital analog voltage, analog current, Pulse, serial port. can be switched by many ways | ||
Auxiliary frequency source | 10 kinds of Frequency source, given by Digital analog voltage, analog current, pulse, serial port. Can be switched by many ways. | |
Input and output | Input terminals | 6 digital input terminals, one of which supports up to 100 kHz high-speed pulse input.(S3) |
2 analog input terminal,one of which only supports 0-10V voltage input and the other supports 0–10 V voltage input and 4–20 mA current input. | ||
Output terminal | 1 digital output terminal | |
1 relay output terminal (RA.RB.RC) | ||
1 analog output terminal :that supports 0–20 mA current output or 0–10 V voltage output | ||
Frequency source | Digital setting, analog voltage setting, analog current setting, pulse setting and serial communication port setting. | |
LED display | It displays the parameters. | |
Key locking and function selection | It can lock the keys partially or completely and define the function range of some keys so as to prevent malfunction. | |
Protection mode | Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under voltage protection, overheat protection and overload protection. |
VFD Model | Input voltage | Rated Output Power (KW) | Rated Input current (A) | Rated Output Current (A) | Motor Power (kW) |
Z5200A00D7K-BF | 1PH AC220V ±15% | 0.75 | 7.2 | 5 | 0.75 |
Z5200A01D5K-BF | 1.5 | 10 | 7 | 1.5 | |
Z5200A02D2K-BF | 2.2 | 16 | 11 | 2.2 | |
Z5400A0D75K-BF | 3PH AC380V ±15% | 0.75 | 3.8 | 2.5 | 0.75 |
Z5400A1D5K-BF | 1.5 | 5 | 3.7 | 1.5 | |
Z5400A02D2K-BF | 2.2 | 5.8 | 5 | 2.2 | |
Z5400A03D7K-BF | 3.7 | 10 | 9 | 3.7 | |
Z5400A05D5K-BF | 5.5 | 15 | 13 | 5.5 | |
Z5400A07D5K-BF | 7.5 | 20 | 17 | 7.5 | |
Z5400A0011K-BF | 11 | 26 | 25 | 11 | |
Z5400A0015K-BF | 15 | 35 | 32 | 15 | |
Z5400A0018K-BF | 18.5 | 38 | 37 | 18.5 | |
Z5400A0022K-BF | 22 | 46 | 45 | 22 | |
Z5400A0030K-BF | 30 | 62 | 60 | 30 | |
Z5400A0037K-BF | 37 | 76 | 75 | 37 | |
… | … | … | … | … | |
Z5400A00160K-BF | 160 | 160 |
FAQ
1. Are you a manufacturer or a trade company?
A. ZONCN is a leading inverter manufacturer in China since 2006.
2. What is your normal lead time for this kinds of inverter?
A. Normally, our delivery time is within 15 days after payment.
3. What is your warranty time for this inverter?
A. Our inverters' warrranty time is 18 months after delivery.
4. Can you produce this inverter for my own logo?
A. Sure, no problem.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2006
Total Annual:
150 million-200 million
Employee Number:
600~700
Ecer Certification:
Verified Supplier
About Our Company Wuhu ZONCN Automation Equipment Co., Ltd. is located in Wuhu city, Anhui province, which is the 4th factory of Shanghai Zhongchen Electronic Technology Co., Ltd. It is the production base of small power frequency inverters, and also the office address of international trade ... About Our Company Wuhu ZONCN Automation Equipment Co., Ltd. is located in Wuhu city, Anhui province, which is the 4th factory of Shanghai Zhongchen Electronic Technology Co., Ltd. It is the production base of small power frequency inverters, and also the office address of international trade ...
Get in touch with us
Leave a Message, we will call you back quickly!