Changzhou Junhe Technology Stock Co.,Ltd
| Payment Terms | L/C, T/T |
| Supply Ability | 1 Ton per Day |
| Delivery Time | Ten days after receipt of advance payment |
| Packaging Details | 20L/barrel 200L/barrel |
| Name | microemulsion cutting fluid |
| Appearance | Red brown oil liquid |
| Phase state | Clear to microemulsion |
| Soap | no |
| Oil | no |
| mL/10min Defoaming ability | ≤2 |
| Brand Name | JUNHE |
| Model Number | MCF-203 |
| Certification | ISO9001 TS16949 SGS |
| Place of Origin | Changzhou in china |
View Detail Information
Explore similar products
Cleaning Agent Metal Cutting Fluid Hydrogen Inhibition
Polycrystalline Silicon Machine Cutting Fluid , Metal Working Oil
Non Toxic Metal Cutting Liquid Lube Without Skin Stimulation
Colorless Viscous Monocrystalline Metal Cutting Fluid IBC Packaging
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 1 Ton per Day |
| Delivery Time | Ten days after receipt of advance payment | Packaging Details | 20L/barrel 200L/barrel |
| Name | microemulsion cutting fluid | Appearance | Red brown oil liquid |
| Phase state | Clear to microemulsion | Soap | no |
| Oil | no | mL/10min Defoaming ability | ≤2 |
| Brand Name | JUNHE | Model Number | MCF-203 |
| Certification | ISO9001 TS16949 SGS | Place of Origin | Changzhou in china |
| High Light | Silicon Slice Detergent ，Industrial Chemical Cleaning | ||
Micro Emulsive Metal Cutting Fluid With Excellent Lubrication Performance
Metal Cutting Fluid brief
This product is oil liquid,belong to semi-synthetic micro emulsive cutting fluid,consist of mineral oil,lubricants,anti-rust agent,organic surface active agent and other additives.Suitable for processing cast iron, carbon steel, alloy steel, copper alloy, aluminum alloy, and is widely used in all kinds of machine tools, machining center of cutting, grinding process. Liquid supply for single machine and concentrated supply for central cooling system
Metal Cutting Fluid features:
1, General type cutting fluid, wide range of application
2, Microemulsive cutting fluid, excellent lubrication and cooling performance, water liquid treatment is easy
3, Excellent lubrication, cooling, cleaning and anti-rust performace
4, Products can improve the surface finish of workpiece, ensure the workpiece and machine tool online antirust requirements
5, Good corrosion resistance, foam inhibiting and emulsion stability of long service life, reduce maintenance costs
Metal Cutting Fluid Technical parameters
| Item | Quality index | Test method | ||||
| 15~35℃ Original solution appearance | Red brown oil liquid | GB/T6144 5.2 | ||||
| Diluent(5%) | Phase state |
Clear to microemulsion | Visual | |||
| pH | 9.0～10.0 | GB/T 6144 5.5 | ||||
|
Stability (15~35℃, 24h) | Soap | no | SH/T0365 appendixA | |||
| Oil | No | |||||
| (15~35℃, 4h) Salt allowance | No phase separation | SH/T0365 appendixC | ||||
| mL/10min Defoaming ability | ≤2 | GB/T6144 5.6 | ||||
| 55±2℃ Corrosion test,full immersion | 45# steel | 24h | GB/T6144 5.8 | |||
| Brass | 6h | |||||
| Red copper | 8h | |||||
| H62,Brass | 8h | |||||
| 35±2℃ Anti-rust test | First grade grey casting iron | Single piece | 24h | GB/T6144 5.9 | ||
| Lamination | 8h | |||||
Metal Cutting Fluid Instructions:
1, Recommended concentration:cutting:1:10~1:20; grinding: 1:20~1:25,Use concentration can be adjusted according to processing requirements
2, Use new fluid method: before using the new liquid, clean the storage tank and piping circulation, with 1%~2% concentration diluent (and adding bactericide ),at last add the productt evenly circulation can be used
3, Tank liquid supply or maintenance: when need supply tank need supply, should add water with corresponding percentage of original solution
4, Working liquid should be kept clean and ventilated, timely remove iron and oil and other impurities
5, If machine downtime for a long time, should air circulation and oxygen filling tank at least 2h/day.
Attention:
1, Machine tool should be complete filter, slag system, timely removal of scrap metal, oil slick and other impurities, if not many days to start the machine tool, if machine downtime for a long time, should air circulation and oxygen filling tank at least 2h/day.
2, Central fluid feeding and central cooling system, should be detailed operational procedures, that person is responsible for operation. maintenance and management.
3, Mixed with other brand cutting fluid is prohibited
4, This product should be stored in a dry, cool and ventilated inside storeroom, leakage should be avoided in the sun, rain, 5 ~ 35 ℃ storage temperature.If improper storage cause the product status changes, restore specified storage temperature after mixing, and then dilute liquid, does not affect the processing performance, can be used normally.
Company Details
Business Type:
Manufacturer
Year Established:
1998
Total Annual:
1300-1500
Employee Number:
200~250
Ecer Certification：
Verified Supplier
Changzhou Junhe Technology Stock Co., Ltd. is a high-tech enterprise devoted to developing industrial fine chemicals, special equipment and services solution provider which was founded in Changzhou, Jiangsu in 1998. Zinc flake microlayer corrosion protection coating is one of our core p... Changzhou Junhe Technology Stock Co., Ltd. is a high-tech enterprise devoted to developing industrial fine chemicals, special equipment and services solution provider which was founded in Changzhou, Jiangsu in 1998. Zinc flake microlayer corrosion protection coating is one of our core p...
Get in touch with us
Leave a Message, we will call you back quickly!