Beijing GFUVE Instrument Transformer Manufacturer Co.,Ltd.
| Payment Terms | T/T, Western Union, L/C |
| Supply Ability | 50000 pieces per month |
| Delivery Time | Within 7 Days |
| Packaging Details | Export Carton Box |
| Ratio | 1000: 1 or 2000:1 customize |
| Accuracy | 0.1%, 0.2% |
| Primary current | 500A |
| Secondary current | mA AC customize |
| Max. voltage not insulated conductors | 600 V |
| Dimensions (L x W x H) (mm) | 82 x 290 x 25.3 |
| NAME | GFUVE AC Clamp On Current Transformer |
| Connector | BNC & 4MM Banana |
| Color | Black |
| Standards | EN 61010-2-032, IEC60044-1, EN 61010-1 |
| Brand Name | GFUVE |
| Model Number | Q40-2 |
| Certification | CE UL |
| Place of Origin | China |
View Detail Information
Explore similar products
10M Hz Ratio 500A / 500mA AC Current Clamp On Current Transformer busbar Jaw
1000A/1A 0.1% Precision Oscilloscope Clamp On Current Transformer With 4mm / BNC
Electronics power quality analyzer 1000A Clamp On Current Transformer Amp Clamp
1500A 2KHz Oscilloscope Clamp On Current Transformer , 0.5% Accuracy Current
Product Specification
| Payment Terms | T/T, Western Union, L/C | Supply Ability | 50000 pieces per month |
| Delivery Time | Within 7 Days | Packaging Details | Export Carton Box |
| Ratio | 1000: 1 or 2000:1 customize | Accuracy | 0.1%, 0.2% |
| Primary current | 500A | Secondary current | mA AC customize |
| Max. voltage not insulated conductors | 600 V | Dimensions (L x W x H) (mm) | 82 x 290 x 25.3 |
| NAME | GFUVE AC Clamp On Current Transformer | Connector | BNC & 4MM Banana |
| Color | Black | Standards | EN 61010-2-032, IEC60044-1, EN 61010-1 |
| Brand Name | GFUVE | Model Number | Q40-2 |
| Certification | CE UL | Place of Origin | China |
| High Light | oscilloscope amp probe ，oscilloscope amp clamp | ||
Q40 GFUVE Alternating Current Clamp On Current Transformer Ratio 500A / 5V 2.5 Meter Cable
The GFUVE Q40-2 Split Core Current Sensor has high frequency available for oscilloscope, excellent linearity performance. The distinct jaw shapes to be used for hooking or prying around the conductor.
In electrical and electronic engineering, a current clamp or current probe is an electrical device with jaws which open to allow clamping around an electrical conductor. This allows measurement of the current in a conductor without the need to make physical contact with it, or to disconnect it for insertion through the probe. Current clamps are typically used to read the magnitude of alternating current and, with additional instrumentation, the phase and waveform can also be measured. Some clamp meters can measure currents of 1000 A and more. Hall effect and vane type clamps can also measure direct current.
GF438II PQA with Three 500A Clamp-On Current Transformers, 40mm Model: Q40 This Power power quality analyzer set comes with 4pcs Q40 clamp-on current transformers that have a 10mA to 500Arms measuring range and a 40mm diameter maximum conductor size.
The GFUVE clamp-on current transformer is very popular with our customers due to its fast and easy installation Produced with amorphous silicon core or permalloy core, this product features small size, high precision good stability and good anti-interference This product is widely used for measuring power and energy in the fields of electric power, communication and monitoring system. Besides the high precision and the small phase error this clamp-on current transformer can be used to measure a wide variety of electric parameters without disconnecting the exiting electric system.
Features
Measurement range of 1mA to 600A AC
Large jaw opening designed
Improved ergonomic design and easy operation
High content nickel metal core
Conforms to EN 61010, 600V CAT III
Low phase shift for power measurement
Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters
UL, CE mark
Applications
Power quality measuring
Large industrial loads
Measuring around cable bundles
Power load monitoring
Waveform analysis
Energy meter calibrator
Parameter
| Electrical parameters | |
| Ratio | 1000: 1 or 2000:1 (customized) |
| Accuracy class | 0.1%, 0.2%, 0.5% |
| Primary current | 0 - 500A AC |
| Secondary current | 0 - 1A AC or 0-5V AC (customized) |
| Max. Cont. Input current | 600A |
| Over voltage category | CAT III 600V |
| Output signal (AC current) | 250mA,500mA,1A,5A AC at nominal input current |
| Output signal (AC voltage) | 250mV, 500mV, 1V, 5V AC at nominal input current |
| Frequency range | 40Hz-2000Hz |
| Dielectric strength | 3KV 50Hz/60Hz at 1 minute |
| Temperature range | -20°C to +55°C |
| Output | 2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors | 600 V |
| Standard | EN 61010-1, EN 61010-2-032, IEC60044-1 |
| Installation | Clamp type |
| Output mode | Lead output (2.5m) |
| Mechanical parameters | |
| Dimensions (L x W x H) (mm) | 82 x 290 x 25.3 |
| Weight (g) | 500 |
| Holding wire diameter (mm) | φ40 |
| Max. jaw opening (mm) | 40 |
| Color | Black |
| Material | PC+ABS+Polycarbonate, UL94 V0 |
Photos
FAQ, following questions will help you to select the matched probe for your applications.
1. Please determine if you are measuring AC or DC?
GFUVE Q40-2 is for AC measuring.
2. What is the maximum current you will measure?
Q40-2 max current is 600A
3. What size conductor will you clamp onto? This parameter determines the probe jaw size needed.
Q40-2 can clamp conductor within φ40mm
4. What type of probe output do you need or can you work with (mA, mV, A, AC, etc.)?
Q40-2 can customize output with Amp, Volt.
5. What is the working voltage of the conductor to be measured?
GFUVE probes should be used below 600 volts
6. What type of termination do you need: jacks, leads or BNC?
Q40-2 standard has 2.5meter leads. We can offer jacks or BNC… as options.
7. If you cannot find information you need or would like assistance, contact us today. We have designed many more probes than those shown in this catalog, and we manufacture in Beijing, China.
Company Details
Business Type:
Manufacturer
Year Established:
2008
Total Annual:
$100,000,000-$150,000,000
Employee Number:
300~350
Ecer Certification：
Active Member
Beijing GFUVE Instrument Transformer Manufacturer Co., Ltd. was established in 2008. It combined design, manufacturing and sales together as one high-tech enterprise. GFUVE Instrument Transformer company mainly produces less than 35kV current transformer and voltage transformer, split core... Beijing GFUVE Instrument Transformer Manufacturer Co., Ltd. was established in 2008. It combined design, manufacturing and sales together as one high-tech enterprise. GFUVE Instrument Transformer company mainly produces less than 35kV current transformer and voltage transformer, split core...
Get in touch with us
Leave a Message, we will call you back quickly!