Sy290 U Type Hot Rolled Steel Sheet Piles For Retaining Wall

Product Specification

Sheet piles are sections of sheet materials with interlocking edges that are driven into the ground to provide earth retention and excavation support. Sheet piles are most commonly made of steel, but can also be formed of timber or reinforced concrete. They are installed in sequence to design depth along the planned excavation perimeter or seawall alignment. The interlocked sheet piles form a wall for permanent or temporary lateral earth support with reduced groundwater inflow. Anchors can be included to provide additional lateral support if required.

Sheet piles are commonly used for retaining walls, land reclamation, underground structures such as car parks and basements, in marine locations for riverbank protection, seawalls, cofferdams, and so on. Permanent steel sheet piles are designed to provide a long service life. Vibratory hammers are typically used to install sheet piles. If soils are too hard or dense, an impact hammer can be used to complete the installation. For the development of sheet piles, there are two main techniques: hot-rolled and cold-formed. At high temperatures, hot rolled piles are produced and the interlocks appear to be stronger and more resilient.

Advantages of sheet pile;

Recyclable and reusable.
Available a wide range of lengths, size and steel options.
Can be used for temporary and permanent structures.
Can be installed using silent and vibration-free methods.
Quicker installation than contiguous or secant walls.
Cofferdams can be constructed in almost any desired shape,
Provide a close-fitting joint to form an effective water seal.
Light in weight, making lifting and handling easy
Length and design of the pile are easily adjustable
Joints are designed to withstand the high pressure necessary for them to be placed in place
A little maintenance is needed above and underwater

Excellent characteristics
As a reusable green and environment-friendly foundation structure material, hot-rolled U-shaped steel sheet piles are highly efficient, durable, simple, lightweight, and have an excellent cross-sectional shape that is sealed and anti-seepage. And unique advantages such as safety and environmental protection.Compared with other structures, it has a light structure, strong bearing capacity, and good earthquake resistance; strong water insulation, which can make the structure quickly stop water or plug leaks, impervious to penetration and easy to construct.

Major application
The first phase project of Shanghai Changxing Island Shipbuilding Base, Tangshan Caofeidian Coal Wharf and other major projects, the amount of one-time steel sheet piles for these projects has reached 10,000 tons. In addition, in the application of foundation pit enclosure, water retaining cofferdam, wharf construction, etc., such as the second phase project of Pudong International Airport, Shanghai World Expo Project, and the temporary enclosure of steel sheet piles for Hangzhou Bay Bridge are also relatively large.

Attention to detail Steel sheet piles are inspected for appearance surface defects, length, width, thickness, height, end square ratio, straightness and lock shape, and channel steel piles are inspected for appearance surface defects, length, width, thickness, height, end angle , straightness and other inspections, cut off the welded parts on the pile that affect the pile driving (there are cut holes and section defects should be reinforced).

Full range
Cold-formed steel sheet piles and hot-rolled steel sheet piles can be produced in U-shape, Z-shape, and W-shape. The manufacturing process is different. The wall thickness of cold-formed steel sheet piles is the same, and the thickness of hot-rolled steel sheet piles is different in different parts. do thick.
The length of hot-rolled steel sheet piles is generally limited, mainly 9 meters, 12 meters, 15 meters, 18 meters, 400 wide, and 600 wide. The water stop effect is generally better than that of cold bending, and the market stock is large.

Quality first: production and inspection in strict accordance with production standards;
Price advantage: discounts based on real market prices;
Transaction security: There will be no loss of customer funds;
After-sales guarantee: the customer's problem is our problem;
Long-term cooperation: quality assurance, price advantage, sincere service can last for a long time.

Shandong Zhengde Metal Manufacturing Co., Ltd. is a production and sales company integrating hot-rolled steel coils, cold-rolled steel coils, galvanized steel coils, color-coated steel coils, section steel, steel pipes, steel wires, metal mesh, stainless steel, aluminum, copper and other metal products integrated large enterprises. Five production and sales bases have been formed in Binzhou, Liaocheng, Wuxi, Tianjin, Jinan and Tai'an, with more than 100 production lines, 4 nationally recognized laboratories, 2 technical engineering centers, and 5 enterprise technology centers. Products are exported to more than 50 countries and regions such as North America, South America, Europe, Africa, Oceania, Middle East, and Southeast Asia.

FAQ:

1. Are you a trading company or a factory?
A: We are a direct factory with more than 30 years of production experience, a professional technical team, production team, overseas sales team, can solve various problems for you

2 .What's your advantage?
A: Great products with competitive price and professional service on export business.

3. How I believe you?
A : We consider honesty as the core of our company, we can tell you the contact information of our some other clients for you to check our credit. Besides, there is trade assurance from , your order and money will be well guaranteed.

4.Can you give warranty of your products?
A: Yes, we extend a 100% satisfaction guarantee on all items. Please feel free to feedback immediately if you are not pleased with our quality or service.

5.Where are you? Can I visit you?
A: Sure,welcome to you visit our factory at any time.

6.How about the delivery time?
A: We have multiple warehouses, some products are in stock, and we can ship them to you immediately!
Other products that need to be produced will be produced within 10-15 days at the earliest according to your requirements; large orders will be produced according to the specific situation.

7.what kind of payment does your company support?
A: T/T, 100% L/C at sight, Cash, Western Union are all accepted if you have other payment,please contact me.