Compressed Air Filter Element for air line filter

Compressed Air Filter Element Air Compressor L030

About Compressed Air:
Compressed air is the second-largest power source after electricity, and it has a multi-purpose process gas source. The unfiltered and separated
compressed air contains a considerable amount of water, solid particles, dust, oil mist, bacteria and other pollutants. These pollutants have a certain
impact on the profitability and production costs of the factory. In order to maintain the competitive advantage of the factory, It is necessary to implement
sustainable measures and apply quality-assured purification equipment.

Filter Element Description:
1. FPM series ring blocks the air before and after filtering to achieve a better filtering effect.
2. The supporting cylinder adopts stainless steel to ensure the filter element strength and the layered filtration design guarantees the filtering precision of
filter element.
3. 96% porosity have strong capacity of holding dusts, serve life up 6000 to 8000 hours.
4. The cover is made of PA+GF, free from deformation at 1.8 Mpa pressure and high temperature of 240ºC and capable of resisting general acid and alkali
chemical corrosion and withstanding the severe compressed air environment. And with extremely strong hydrophobic and oilphobic.
5. The inside and outside support network is made of stainless steel to ensure the filter element strength, protect the glass fiber in production process, prevent
the damage to filter element due to material rusting and avoid the damage to filter element due material rusting and avoid the secondary pollution of compressed air.
6. Special material for the outer layer of the filter element can aggregate the water and oil, therefore prevent the oil or water from being blown away and achieve
the better drying and filtering effect.

YD series filter element filtration precision and performance:

PF	AO	AA	AX	ACS	AR	AAR
As a primary filter, particles whose diameter more than 5μm can be removed, the maximum residual oil contect is negligible.	High efficiency general protection, dust particles, water mist and oil mist whose diameter more than 1μm can be removed, the residual content of oil mist does not exceed 0.6mg/m³(21ºC), 1ppm(w).	High efficiency oil removal filtration, dust particles, water mist and oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.01mg/m³(21ºC), 0.01ppm(w).	Ultra-efficient filtration, dust particles, water mist and oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.001mg/m³(21ºC), 0.001ppm(w).	Dust particles whose diameter more than 0.01μm, oil vapor and odor can be removed, the maximum residual residual content of oil vapor does not exceed 0.003mg/m³(21ºC), 0.003ppm(w).	Dust particles whose diameter more than 1μm can be removed.	Dust particles whose diameter more than 0.01μm can be removed.

International test and measurement standard ISO12500
>ISO 12500 has made clear a general test and definition method for the Compressed Air Filter manufacturers. The main performance parameters
are the air inlet oil content and particles size distribution of the solid particles.
>ISO12500-1 specifies the test requirements for the filtration performance of oil aerosol in the coalescing filter.
>ISO12500-2 specifies the test requirements of adsorption filters for the removal performance of steam adsorption.
>ISO12500-3 specifies the requirements for removal of particulate matter from solid pullutants.

Products are tested with the international advanced testing equipment based on standard ISO12500,

which is equivalent to the standard ISO8573.

Why choose YUKA as your long term business partner?

YUKA's YD series filter elements are ideal solutions for removing pollutants in compressed air systems and saving energy. Use imported quality filter materials and design technology to ensure high-quality compressed air quality and lower operating costs.

We have a full set of testing equipment imported from Europe. Filters and gas-water separators can be tested and rated according to ISO 8573.1: 2009 air quality standards, and provide performance test reports.

Frequently Asked Questions?

Q1. What kind of your company is it?
We're the manufacturer integrated with R&D, production and sales.

Q2. How about your technical conditions and production capability?
Complete process documents and equipment, mass production.

Q3. What is the delivery time?
Delivery time depends on the order quantity, normally is 3-5 working days after 30% payment.

Q4. Do you have a warranty?
Yes, for filter, it is 1 year normally.

Q5. Can you supply customized product?
Yes, we have a professional technical team to provide you with the best solution and complete production processes and control to provide you with satisfied product.
Q6. Usually what kind of transportation mode you supply?
A: By sea, by air , by train and express.

Q7. Could you Calculate the shipping cost for me?
Yes, we are honored to do that for you! Before the freight , please well let us know which seaport or airport near your place.