Hongrijia Depurate Facility Science & Technology Co., Ltd.
| Model No. | HL-1WX |
| Ambient Temperature | 38~45℃ |
| Compressed Air Pressure | 0.7MPA |
| Compressed Dew Point | -20℃ to -40℃ |
| Inlet Oil Contect | 0.008PPM （0.1mg/m³） |
| Air Consumption | 15% |
| Adsorbent | Activated Alumina |
| Regeneration Method | Normal Temperature Regeneration |
| Regeneration Cycle | 4 to 10 Min ajustable |
| Flow Rate Range | 1.2 m³/min to 155 m³/min |
| Power | 220V 50Hz |
| Packaging Details | Box Package |
| Delivery Time | 3-7working days |
| Payment Terms | L/C,T/T |
| Place of Origin | China |
| Brand Name | Yuka |
View Detail Information
Explore similar products
Micro-Heated Molecular sieve air dryer
Product Specification
| Model No. | HL-1WX | Ambient Temperature | 38~45℃ |
| Compressed Air Pressure | 0.7MPA | Compressed Dew Point | -20℃ to -40℃ |
| Inlet Oil Contect | 0.008PPM （0.1mg/m³） | Air Consumption | 15% |
| Adsorbent | Activated Alumina | Regeneration Method | Normal Temperature Regeneration |
| Regeneration Cycle | 4 to 10 Min ajustable | Flow Rate Range | 1.2 m³/min to 155 m³/min |
| Power | 220V 50Hz | Packaging Details | Box Package |
| Delivery Time | 3-7working days | Payment Terms | L/C,T/T |
| Place of Origin | China | Brand Name | Yuka |
The compressed air produced by the compressed air compressor carries a large amount of water, oil and other impurities. If water vapor enters the compressed air line, the condensed vapor can cause oxidation, corrosion and damage to the production line equipment.
The point of maximum water vapor density in each gas depends on its temperature and pressure. When the density of water reaches a certain temperature and working pressure, the temperature is the dew point. That is, if the air cools below the dew point, water vapor in the air can appear in the form of water droplets, causing problems on the production line.
Feature& Advantage
*Designed and constructed according to international standards
*Moisture absorption capacity up to 99.99%
*Use Molecular Desiccant in Order
*High absorption rate of desiccant, impermeable to water
*Inlet and outlet valves with minimal pressure drop
*Capable of operating in temperate and humid climates
*Optimum dew point due to use of dry air with minimal pressure
*Resistant to temperature differences in different weather conditions
*Drain valve operates continuously under humidity, temperature and pressure
*Change the size and size of the inlet and outlet air ducts according to customer needs
*The operation is automatic and requires no special foundation.
*The inside of the tower is epoxy paint and the outside is industrial paint.
*Use the lowest power consumption to operate controllers and solenoids that do not exceed a few watts.
*Eliminate the need for regular replacement parts, reducing service and maintenance costs.
*The device can be installed just by connecting the cables and the intake and exhaust pipes.
Product Specification
Pressure dew point under rated conditions: -20 ° C ~ -40 ° C (molecular sieve up to: -70 ° C)
Intake oil content: 0.08ppm (0.1mg/m³)
Dust particle size of finished product: ≤ 60μm
Average re-flow rate: 15% treatment gas volume
Adsorption type: activated alumina (higher molecular sieve available)
Pressure drop: ≤ 0.021Mpa
Regeneration method: normal temperature regeneration
Working mode: two towers 4min or 10min automatic switching, continuous work
Control mode: cycle period 4~10min adjustable
Product Data Sheet
| Model | Flow rate (m³/min) | Connection | Input Power (KW) | Power | N.W. (KG) | Dimension (MM) |
| HL-1WX | 1.2 | RC1" | 0.2 | 220V 50HZ | 105 | 670x360x1265 |
| HL-2WX | 2.4 | RC1" | 0.2 | 220V 50HZ | 135 | 780x360x1485 |
| HL-3WX | 3.2 | RC1" | 0.2 | 220V 50HZ | 187 | 850x400x1385 |
| HL-6WX | 6.5 | RC1-1/2" | 0.2 | 220V 50HZ | 238 | 1000x450x1700 |
| HL-8WX | 8.5 | RC2" | 0.2 | 220V 50HZ | 292 | 1100x500x2050 |
| HL-10WX | 11.5 | RC2" | 0.2 | 220V 50HZ | 466 | 1200x500x2030 |
| HL-13WX | 13.5 | RC2" | 0.2 | 220V 50HZ | 520 | 1300x500x2230 |
| HL-15WX | 17 | DN65 | 0.2 | 220V 50HZ | 670 | 1300x560x2360 |
| HL-20WX | 23 | DN80 | 0.2 | 220V 50HZ | 798 | 1400x560x2530 |
| HL-25WX | 27 | DN80 | 0.2 | 220V 50HZ | 980 | 1650x600x2570 |
| HL-30WX | 34 | DN80 | 0.2 | 220V 50HZ | 1278 | 1750x750x2630 |
| HL-40WX | 45 | DN100 | 0.2 | 220V 50HZ | 1624 | 1850x750x2650 |
| HL-50WX | 55 | DN100 | 0.2 | 220V 50HZ | 1624 | 1950x850x2650 |
| HL-60WX | 65 | DN100 | 0.2 | 220V 50HZ | 2650 | 2200x900x2650 |
| HL-80WX | 85 | DN125 | 0.2 | 220V 50HZ | 3520 | 2400x1000x2700 |
| HL-100WX | 110 | DN150 | 0.2 | 220V 50HZ | 4320 | 2500x1100x2750 |
| HL-120WX | 130 | DN150 | 0.2 | 220V 50HZ | 4750 | 2650x1200x2800 |
| HL-150WX | 155 | DN200 | 0.2 | 220V 50HZ | 5260 | 2800x1300x2900 |
Working Condition
Rated compressed air inlet temperature: 38 ° C, up to 45 ° C
Rated compressed air pressure: 0.7MPa, maximum 1.0MPa
Company Details
Business Type:
Manufacturer
Year Established:
1998
Total Annual:
10000000-50000000
Employee Number:
100~300
Ecer Certification：
Verified Supplier
Hongrijia Depurate Facility Science & Technology Co.,Ltd. was found in China Shenzhen since 1998. YUKA is our brand, we dedicated in Compressed Air Treatment,New Delhi, South American and Middle-est has subsidiary and sales center. With 12000 square meter in Huizhou for Compressed air dryer work... Hongrijia Depurate Facility Science & Technology Co.,Ltd. was found in China Shenzhen since 1998. YUKA is our brand, we dedicated in Compressed Air Treatment,New Delhi, South American and Middle-est has subsidiary and sales center. With 12000 square meter in Huizhou for Compressed air dryer work...
Get in touch with us
Leave a Message, we will call you back quickly!