Wholesale Pvc Electrical Insulating Tape For Wire Harness Thickness 0.13mm Width

Product Specification

PVC insulating tape has the following specific applications in the electronics industry:

Circuit Board Manufacturing and Repair

Circuit Insulation: During the production of circuit boards, for some circuits with small spacing, PVC insulating tape can be used to prevent short circuits between circuits and ensure the normal operation of the circuit. When repairing circuit boards, if there is damage to the circuit or the insulation layer, PVC insulating tape can be used for temporary or long-term insulation repair to ensure the stability of the circuit.

Component Fixing and Insulation: For some small electronic components such as resistors and capacitors, after they are soldered to the circuit board, additional fixing and insulation protection may be required. PVC insulating tape can firmly fix the components on the circuit board and prevent the pins of the components from short-circuiting with other circuits or components.

Electronic Equipment Assembly
Cable Wrapping: There are usually many cables inside electronic equipment, such as display cables and keyboard cables. Using PVC insulating tape to wrap the cables can organize the cables into bundles, prevent interference between the cables, and play a role in insulation and protection to avoid damage to the cables by external factors.

Interface Sealing: For various interfaces of electronic equipment, such as USB interfaces and audio interfaces, during the assembly process, in order to prevent dust, moisture, etc. from entering the interface and affecting the performance and service life of the equipment, PVC insulating tape can be used to seal the interfaces to improve the sealing and reliability of the interfaces.

Shielded Wire Treatment: In some electronic equipment with high requirements for electromagnetic compatibility, shielded wires are used to transmit signals. PVC insulating tape can be used to wrap the joints of shielded wires to enhance the shielding effect and prevent signal leakage and external electromagnetic interference.

Wire Connection and Protection
Wire Joint Insulation: In the wiring process of electronic equipment, wire connections are inevitable. PVC insulating tape can be used for insulating and wrapping wire joints to ensure good electrical performance at the joints, and prevent leakage and short circuits.

Wire Damage Repair: When the wires in electronic equipment are damaged due to wear, aging, etc., PVC insulating tape can be used to repair the damaged parts in time, restore the insulation performance of the wires, prolong the service life of the wires, and ensure the normal power supply of the electronic equipment.

Distinguishing Different Circuits: In complex electronic circuits, in order to facilitate identification and maintenance, PVC insulating tapes of different colors can be used to mark and distinguish wires with different functions. For example, use red tape to mark power supply wires and blue tape to mark signal wires.

Other Applications
Battery Pack Insulation: When assembling battery packs, PVC insulating tape can be used for insulation and isolation between battery cells to prevent short circuits between batteries. It can also be used to insulate the positive and negative lead-out wires of the battery pack to ensure the safe use of the battery pack.

Electromagnetic Shielding: In some occasions where electromagnetic shielding is required, conductive PVC insulating tape can be used in combination with metal shielding layers to enhance the electromagnetic shielding effect and reduce the impact of electromagnetic radiation on the surrounding environment and other electronic equipment.

Temporary Protection: During the production, transportation and storage of electronic equipment, if electronic components or circuit boards need temporary protection, PVC insulating tape can be used for simple wrapping and protection to prevent components from being scratched, collided or otherwise damaged.