Balloon Time Disposable Helium Tank For 30 / 50 / 100 Balloons

Product Specification

Wholesale helium tank Balloon Time Disposable Helium Kit helium gas cylinder for 30/50/100 balloons china supply  

DETAILS:

• BALLOON TIME HELIUM TANK: Balloon Time Disposable Large Helium Tanks 14.9 cu.ft for balloons with Balloon Weights.

• INCLUDES ALL YOU NEED: It comes with 50 Latex Colorful Balloons + Balloon Tying Tool + 10 Flower Clips + White Curling Ribbon which is great use for securing helium balloons + 12 Balloon Weight.

• GREAT FOR PARTIES: High quality product, perfect for any occasion or purpose, party, festive, birthdays, celebrations. Any party for students, school kids, birthday for your family, friends and yourself.

• HOW NOT TO: Follow the guide for floating the balloons. DO NOT OVER INFLATE! If so, its float time will dramatically decrease. Your balloons should be eggcellent, they shouldn’t resemble a lightbulb, which shows they’re overinflated.

• HOW TO GET MOST FROM BALLOONS: They can affect from hot or long temperatures, it’s best to fill them shortly before the event. Tie them tightly, and do not over inflate. FOLLOW THE GUIDES.

INFORMATION:

The warning and safety guidelines listed here may not be exhaustive. Please follow all safety instructions provided by your helium tank supplier.

Helium is non-flammable and non-toxic, however, inhaling it from a helium tank or a balloon may cause asphyxiation or loss of consciousness and stability. In case of inhalation– bring the person to fresh air. There are no likely adverse effects expected from exposure to skin or eye contact from helium itself. However, when released at rapid speed from a high-pressure tank injury could occur. Follow all safety instructions as per the helium tank supplier.

Used in a well-ventilated area. All safety precautions listed on the Material Safety Data Sheet (MSDS) should be followed.
All safety instructions must be followed along with common sense.

Gas is under pressure. Handle with care. Helium is stored compressed in a high-pressure cylinder.
Not for use in any medical or industrial application. Helium for balloons is sold for only the purpose intended-filling foil and latex balloons.
Never inhale or allow to be inhaled, helium contained in a balloon, a gas container, or filling equipment even for a short period. Inhalation of helium can cause death or personal injury and may also cause dizziness, an irregular heartbeat, narcosis, nausea, or asphyxiation /suffocation. Helium reduces oxygen for breathing.
Always secure the cylinder and prevent the cylinder from falling over. Never leave the cylinder in a public place unattended where children or unauthorized persons can gain access to it. Do not allow children to touch or play with cylinders, valves, or filling equipment. Use only approved regulator valves. When transporting tanks we recommend you store the helium tank in the trunk of your car secured. If you must transport tanks in the passenger compartment make sure they are secured and have at least one window open at all times.
Only those over 18 and who have read the following safety instructions should use the tank and equipment and fill balloons. Only those over the age of 18 should touch, move or transport the tank or operate the balloon filling equipment.
Never use the cylinder or open cylinder without first fastening a regulator valve or filling equipment rated for cylinder pressure. DO NOT store or use the tank in a closely confined or poorly ventilated area. Leaking helium can reduce the amount of oxygen in the air and cause asphyxiation
When transporting the tank you must make sure the balloon nozzle is removed and the tank shut off is turned off.
Bleed all helium out of the valve (balloon nozzle) before attempting to remove the valve (balloon nozzle). If there is helium left in the valve (balloon nozzle) it may not unscrew.
Keep away from heat (<52°C/125°F). Use only in an area with adequate ventilation. Keep cylinder valve closed when the product is not used. Gas may accumulate in confined areas. Rapidly evolving gas can cause burns similar to frostbite. Since the product is a gas, it will probably be inhaled rather than ingested. Consider first the preventive measures in case of inhalation. Valve protection caps must remain in place unless the cylinder is secured with a valve outlet or piped to the usage point. Do not drag, slide or roll cylinders. Use a suitable hand truck for cylinder movement. Use a pressure regulator when connecting the cylinder to lower pressure piping or systems. Do not heat the cylinder by any means to increase the discharge rate of product from the cylinder. Use a check valve or trap in the discharge line to prevent hazardous backflow to the cylinder. Do not tamper with (valve) safety devices.
CLOSE VALVE AFTER EACH USE AND WHEN EMPTY.
Balloons represent a possible choking hazard. Adult supervision is required. Keep uninflated balloons away from children. Discard broken balloons immediately.
Do not place the nozzle in the mouth or nose for any reason. Doing so can damage lungs and other body parts, which can result in serious personal injury or death.
Never expose helium cylinders to direct heat, fire, or mistreatment. Exposure to such conditions may result in the rupture of the cylinder, resulting in serious personal injury or death.
First Aid:

In case of Inhalation, conscious persons should be assisted to an uncontaminated area to inhale fresh air. The person should be kept warm and calm. Quick removal from the contaminated area is most important. Unconscious persons should be moved to an uncontaminated area, given assisted resuscitation and supplemental oxygen. Further treatment should be symptomatic and support.ve. CONTACT A PHYSICIAN. Call 911. For supplemental support in case of emergency please call your helium supplier.

For additional information read the Material Safety Data Sheet supplied to you.

FAQ:

Q: How should I submit artwork and what format?

A: You can submit artwork to us by Email or upload your artwork to our FTP.

We accept: COREL DRAW, ILLUSTRATOR, COREL PHOTO PAINT, PHOTOSHOP,

TIFF,. JPEG,. GIF (tiff at 300dpi, jpeg at 300dpi, gif at 600dpi 100%size)

PDF (vectors in PDF, if using raster program make sure you have high res at 100%size.)

Q: What are setup costs?

A: Set up costs most often apply to new graphics. The first time you order and have a two color print to it, we charge a one time

fee for two screen charges. If you are an existing customer and you want to a NEW graphic the same rules apply. Set up fee for

normal deck heat transfer graphic: USD160 unlimited colors. For longboard transferr graphic USD320 unlimited colors.

Q: Can I order samples?

A: Absolutely, we send requested samples at a minimum charge. You will have to pay shipping cost and samples fee,

the samples fee will return back to you after you place your order. New customers must email us the following information.

Company or shop name, Address, telephone No. specific boards.

Q:When is your delivery time?

A:It depends on product and order QTY.

Normally,it takes us 25 days after receiving the deposit,Repeat order only need 15-20 days.

Q: What is the loading port?

A: Regularlly Ningbo or Shanghai

Q: Do you provide OEM developing services?

A: Yes,we have plenty experience in OEM developing, aslo for famous brands,