Disposable Helium Tank 15 Cubic Feet For 50 Assorted Latex Balloons Party City

Product Specification

Cheap Disposable Helium Tank, 15 Cubic Feet, helium gas for 50 Assorted Latex Balloons party city buy from china ​  

DETAILS:

• Includes one 12 pound, 15 cubic feet Disposable Helium Tank

• Non-toxic, nonflammable Disposable Helium Tank features an easy-opening valve and filler tube and includes 50 assorted size and color latex balloons and 1 roll of ribbon

• Helium tank contains enough helium to fill 50 nine inch balloons or 27 eleven inch balloons

• Latex balloon float time is approximately 5-7 hours. Foil balloon float time is approximately 4 days

• Disposable Helium Tank is recyclable but not refillable. Note: Due to DOT regulations, helium tank cannot be shipped by air

• Balloon Time Disposable Helium Jumbo Tank Fills 50 Balloons included. BEST DEAL!

• Includes: (1) lightweight, disposable helium-filled tank comes with an easy-to-use nozzle and carry handles for easy transport.

• Tank can fill approximately (50) - 9" latex balloons, (27) - 11" latex balloons, (27) - 18" Foil Balloons, or (20) - 20" Foil Balloons.

• The number of latex balloons you can inflate depends on the size you choose to create - larger sizes yield fewer filled balloons.

• Tank holds approximately 14.9 cubic feet of helium and has a PSI of 260.

INFORMATION:

Helium balloons are a function favourite. These festive decorations help elevate the mood of any event by adding ambience and excitement to your space. However, transporting helium balloons to a location can be very difficult. Not only can they take up a lot of space, depending on how many you might transport, but transportation can also reduce the lifespan of the balloons.

Unlike other brands, like Balloon Time Helium Tanks, our Koch & Co Helium Tanks are lightweight, disposable, easy to use, and a safe option for your next party or special event. These high-quality helium tanks give you the advantage of filling your balloons on-site and take away the headache that comes with ordering and transportation.

This helpful guide will show you how easy this product is to use, and how to dispose of it safely.

How To Use:
1. Remove the rubber tip cap and attach the balloon nozzle.

2. Open the tank valve by rotating the handle anti-clockwise.

3. Slide the neck of the balloon over the balloon nozzle.

4. Lift the balloon nozzle upwards to release the gas and fill the balloon.

5. Inflate the balloon to the recommended size. Do not overfill the balloon or it may burst.

6. Remove the inflated balloon from the nozzle and knot or clip the end of the balloon to secure it. Please take caution as the balloon might fly away. We recommend that a ribbon and/or balloon weight is attached to the end of the balloon to prevent it from flying away.

7. After use, close the tank valve by rotating the handle clockwise. Ensure the tank valve is strictly closed when not in use.
How To Dispose Of Your Tank:
Recycling programs may vary in each area, please contact your local council for more details. Always ensure the tank is empty and depressurised to avoid serious injury.

To Dispose of your tank, you will need:

Hammer
Flat-head Screwdriver
Pliers
Protective work Gloves
Protective work Goggles
Permanent Marker
1. Go to a well-ventilated area, then fully open the tank valve by turning it anti-clockwise. Ensure that the nozzle is facing away from you, then push down on the nozzle to release the leftover gas. Keep pressing until you can no longer hear a hissing sound.

2. Remove the nozzle by unscrewing it anti-clockwise.

3. Put on your protective gloves and goggles. Locate the round blowout valve at the top of the tank where the nozzle and green valve is. Using a hammer and flat-head screwdriver, carefully puncture the inner edge of the small blowout valve until it can be pried off using the pliers. You may need to puncture the blowout valve in a few places around the inner edge to fully open and remove it.

4. Once the blowout valve has been removed, take a permanent marker, circle the hole and write “EMPTY”, in large bold letters, next to it.

5. Take the empty tank to your local recycling centre or, if offered in your area, contact your local council to organise a roadside collection.

FAQ:

Q: How should I submit artwork and what format?

A: You can submit artwork to us by Email or upload your artwork to our FTP.

We accept: COREL DRAW, ILLUSTRATOR, COREL PHOTO PAINT, PHOTOSHOP,

TIFF,. JPEG,. GIF (tiff at 300dpi, jpeg at 300dpi, gif at 600dpi 100%size)

PDF (vectors in PDF, if using raster program make sure you have high res at 100%size.)

Q: What are setup costs?

A: Set up costs most often apply to new graphics. The first time you order and have a two color print to it, we charge a one time

fee for two screen charges. If you are an existing customer and you want to a NEW graphic the same rules apply. Set up fee for

normal deck heat transfer graphic: USD160 unlimited colors. For longboard transferr graphic USD320 unlimited colors.

Q: Can I order samples?

A: Absolutely, we send requested samples at a minimum charge. You will have to pay shipping cost and samples fee,

the samples fee will return back to you after you place your order. New customers must email us the following information.

Company or shop name, Address, telephone No. specific boards.

Q:When is your delivery time?

A:It depends on product and order QTY.

Normally,it takes us 25 days after receiving the deposit,Repeat order only need 15-20 days.

Q: What is the loading port?

A: Regularlly Ningbo or Shanghai

Q: Do you provide OEM developing services?

A: Yes,we have plenty experience in OEM developing, aslo for famous brands,