Cannon Compatible Ink Cartridges Replacement For PGI-280XXL CLI-281XXL

Product Specification

Cannon Compatible Ink Cartridges Replacement for PGI-280XXL CLI-281XXL 280 281PIXMA TR7520 TR8520 TS6120 TS6220 TS6320 

DETAILS:

Applicable to Canon pgi725 cli726 ink cartridge

Compatible with cartridge model: pgi725bk cli726bk cli726c 726M 726y 726gy

Applicable to printer: canonpixma ip4870 / ip4970 ix6560 mg5170 / mg5270 / mg5370 / mg6170 / mg6270 / mg8170 / mg8270

MX886/MX897

Color: black blue magenta yellow gray

Ink capacity: BK 25ml small BK C m y Gy 11ml

Applicable area: India, South Korea, Southeast Asia, Hong Kong, Macao and Taiwan

Provide OEM processing, large quantity and preferential price.

Shelf life: 2 years

Packing: vacuum bag or color box

After sales: This product is a compatible consumable. If the product has quality problems, it can be returned and replaced. The round-trip freight is borne by our company.

The factory mainly provides processing, which is applicable to Epson Compatible ink cartridge, brother compatible ink cartridge, Kodak compatible ink cartridge, Canon compatible ink cartridge, Lexmark compatible ink cartridge and HP compatible ink cartridge. OEM processing is provided with large quantity and preferential price, which can be discussed in detail.

This product has been tested by the factory, and the defect rate is controlled within 0.04%! If you unfortunately buy a bad ink cartridge, we will return it free of charge within 7 days of your receipt

If there are quality problems, return and replace the package, provide OEM processing, and new compatible ink cartridges

INFORMATION:

Where does ink come from today - Manufacture of Printing Ink

The primary process in printing ink is the grinding and dispersing of the pigment into the vehicle. In most typographic and lithographic inks, this is done in roller mills, which consist of two or more steel rollers turning at slightly different speeds.

Ball or pebble mills are employed when volatile substances are mixed, as in gravure ink. These mills are cylinder, tumble, or roll about. Other chemical manufacturing equipment is used to produce vehicles and for blending, mixing, and handling the intermediate and finished products.

Newspaper Inks. Newspaper ink is designed to permit fast printing with an acceptable quality of reproduction. Little thought is given to the permanence or rub since a newspaper has a short life, and the economy prohibits using costly materials that would impart improved characteristics. News ink is quite fluid, mainly when made for high-speed web presses that print both sides of the stock at one time.

If black, it is almost entirely composed of mineral oil vehicle and carbon-black pigment, with a toner dye or pigment present in a small percentage to overcome the brown tones of the oil and black pigments.

Driers are not commonly added, drying occurring by absorption of the oils into the paper stock. Colored new inks require the use of cleaner oils and are used under conditions requiring the impression of one ink over another, a more costly ink which contains driers is used.

Specialty Inks. Printing and decorating such items as glass bottles, wallpaper, plastic film wraps, metal parts, aluminum foil packages, toothpaste tubes, glassine, cellophane, textiles, metal toys, and containers calls for special inks.

They also consist of the basic components; a vehicle film-former and coloring matter, with additional substances to impart the special characteristics. The ink chemist varies the compounding to fit the ink to the requirements of the surface.

Printer Ink - Where does printer ink come from?

The majority of printer ink constitutes a base of soybean oil or linseed, or a heavy petroleum distillate as solvent. These are then mixed with pigments to make ink which dries through evaporation. The base is also referred to as varnish.

Printer Ink Cartridges

An ink cartridge is the inkjet printer component that has ink deposited into the paper while printing. Every ink cartridge has one or multiple ink tanks; producers add a chip and electronic contacts connected with the printer.

The majority of inkjet printers like HP, Canon, and Lexmark use thermal inkjets. Within each ink reservoir partition is a heating element that contains a resistor or metal plate. As a response to a printer’s signal, a small current will flow through the resistor or metal to make it warm, and the ink with the resistor is vaporized into very tiny steam bubbles within the nozzle.

As a result, ink droplets are pushed out of the cartridge nozzle and into the paper. Such a process occurs in just a fraction of a millisecond.

The printing will depend on the ink’s smooth flow, which may be inhibited if the print head begins to dry, which occurs when ink levels are going low. To clean dried ink on a cartridge print head, use 91% denatured isopropyl alcohol since it doesn’t damage the sponge crucial for ink transfer to paper.

Isopropyl alcohol should be applied carefully since they are strong enough to dissolve clogs using a syringe or dropper. Distilled water on a lint-free cloth is also recommended since tap water may contain contaminants that clog the print head.

For more information on how to remove ink stains: Easy Ways to Remove Printer Ink Stains from Clothes, Carpet or Hand

The ink also serves as a coolant for protecting the metal-plate heating materials. Once the ink is depleted and printing is done, the thermal cartridge’s heating elements usually burn out, damaging the print head. Once the ink runs low, the cartridge must be refilled or replaced so the print head isn’t damaged due to overheating.

FAQ:

Q: How should I submit artwork and what format?

A: You can submit artwork to us by Email or upload your artwork to our FTP.

We accept: COREL DRAW, ILLUSTRATOR, COREL PHOTO PAINT, PHOTOSHOP,

TIFF,. JPEG,. GIF (tiff at 300dpi, jpeg at 300dpi, gif at 600dpi 100%size)

PDF (vectors in PDF, if using raster program make sure you have high res at 100%size.)

Q: What are setup costs?

A: Set up costs most often apply to new graphics. The first time you order and have a two color print to it, we charge a one time

fee for two screen charges. If you are an existing customer and you want to a NEW graphic the same rules apply. Set up fee for

normal deck heat transfer graphic: USD160 unlimited colors. For longboard transferr graphic USD320 unlimited colors.

Q: Can I order samples?

A: Absolutely, we send requested samples at a minimum charge. You will have to pay shipping cost and samples fee,

the samples fee will return back to you after you place your order. New customers must email us the following information.

Company or shop name, Address, telephone No. specific boards.

Q:When is your delivery time?

A:It depends on product and order QTY.

Normally,it takes us 25 days after receiving the deposit,Repeat order only need 15-20 days.

Q: What is the loading port?

A: Regularlly Ningbo or Shanghai

Q: Do you provide OEM developing services?

A: Yes,we have plenty experience in OEM developing, aslo for famous brands,