China factories

China factory - Fangyu(shanghai)Automation Technology Co.,Ltd

Fangyu(shanghai)Automation Technology Co.,Ltd

  • China,Shanghai ,Shanghai
  • Active Member

Leave a Message

we will call you back quickly!

Submit Requirement
China IP68 IP69 Robot Plug Pluggable Wet Cable Wire Robot Connector
China IP68 IP69 Robot Plug Pluggable Wet Cable Wire Robot Connector

  1. China IP68 IP69 Robot Plug Pluggable Wet Cable Wire Robot Connector

IP68 IP69 Robot Plug Pluggable Wet Cable Wire Robot Connector

  1. MOQ: 1 unit
  2. Price: Price negotiable
  3. Get Latest Price
Delivery Time 7-10 days
Payment Terms TT
Supply Ability goods in stock
Type BNC, subsea connectors
Application Power,Automotive
Voltage rating 300 V (resistance to voltage is greater than 1500V 60s)
Insulation resistance > 1000 mΩ(room temperature)
Rubber diameter 15.75mm
Place of Origin Shanghai,China
Brand Name FANGYU
Model Number YS-BH-8F YS-IL-8M

View Detail Information

Contact Now Ask for best deal
Get Latest Price Request a quote
  1. Product Details
  2. Company Details

Product Specification

Delivery Time 7-10 days Payment Terms TT
Supply Ability goods in stock Type BNC, subsea connectors
Application Power,Automotive Voltage rating 300 V (resistance to voltage is greater than 1500V 60s)
Insulation resistance > 1000 mΩ(room temperature) Rubber diameter 15.75mm
Place of Origin Shanghai,China Brand Name FANGYU
Model Number YS-BH-8F YS-IL-8M
High Light IP69 Robot PlugIP68 Robot PlugWire robot connector

Rovmaker Pluggable Wet Cable Wire Robot Subsea Connectors IP68 Ip69 of Underwater Plug and Underwater Socket

Product Description

Specification
STRUCTURE
MATERIALS AND SPECIFICATIONS
Main
The seawater corrodes stainless steel
Install screw
7/16-20 UNF thread length is 15/19mm
Socket head
Neoprene (special mixing rubber for underwater connector)
Contact Pin
Gold-plated copper alloy, American standard pin
Positioning pin
303 stainless steel (2 needle Ø 3.2, 3/4 needle Ø 2, 5/6/8 needle don't need)
O-rings
Nitrile rubber, the imported o-rings, parker 2-014, Ø 12.42 x 1.78
Locking lid
Polyformaldehyde resin (POM)
Cable plug body
Special polyether
Install line
Teflflon, silver-plated pure copper.
End cap
Neoprene (special mixing rubber for underwater connector)
Cable plug
Pressure-resistant seawater special cable.

TECHNICAL PERFORMANCE

ITEM
RATING VALUE
Depth
0~1000 meters
Voltage
300V (resistance to voltage is greater than 1500V 60s)
Working current
2A~16A
Insulation resistance
> 1000 m Ω (room temperature)
Wet insertion frequency
> 500 times
Working temperature
(-4~60)°C

FY Can provide complete robot pre-sales, in sales, and after-sales services
Leading technology, meticulous management, honest service, and customer first

At present, the company produces dozens of series and thousands of specifications of products, providing customers with a wealth of products. The company has passed ISO9001 quality management system certification, most products have passed CE certification, and all products meet ROHS environmental protection requirements.

PRECAUTIONS

Always apply grease before mating.

* Disconnect by pulling straight, not at an angle.
* Do not pull on the cable and avoid sharp bends at cable entry.
* When using a bulkhead connector, ensure that there are no angular loads.
* All kinds of connectors should not be exposed to extended periods of heat or direct sunlight.
Greasing and mating above water (dry mate) :
* Connectors must be greased with Molykote 44 Medium(recommended brand) before every mating.
* A layer of grease corresponding to a minimum 1/10 of socket depth should be applied to the female connector.
* The inner edge of all sockets should be completely covered, and a thin transparent layer of grease left visible on the face of the connector.
* After greasing, fully mate the male and female connector in order to secure optimal distribution of grease on pins and in sockets.
* To confirm that grease has been sufficiently applied, de-mate, and check for grease on every male pin. Then re-mate the connector.
Greasing and mating underwater (wet mate) :
* Connectors must be greased with Molykote 44 Medium(recommended brand) before every mating.
* A layer of grease corresponding to approximately 1/3 of socket depth should be applied to the female connector.
* All sockets should be completely sealed, and a transparent layer of grease left visible on the face of the connector.
* After greasing, fully mate the male and female connector and remove any excess grease from the connector joint.

Cleaning

* General cleaning and removal of any accumulated sand or mud on a connector should be performed using spray based contact cleaner (isopropyl alcohol).

* New grease must be applied again prior to mating.

Use of Loctite

For locking metallic connectors, the use of Loctite 243 is recommended.
INSTALLATION REQUIREMENTS

1. End surface roughness requirements Ra1.6 in the diameter of the screw hole around 25mm when threaded hole installation.
 

2. Hole diameter should be between Ø 11.2 ~ Ø11.4 mm and roughness requires Ra1.6 in the diameter of the screw hole around 25mm when through-hole installation.
 
3. Before installing, make sure to apply a thin layer of silicone oil to the o-ring, not too thick.
 

Company Details

Bronze Gleitlager

,

Bronze Sleeve Bushings

 and 

Graphite Plugged Bushings

 from Quality China Factory
  • Business Type:

    Manufacturer,Agent

  • Year Established:

    2018

  • Total Annual:

    5000-+

  • Employee Number:

    100~+

  • Ecer Certification:

    Active Member

fangyu(shanghai)automation technology co.,ltdIt is mainly engaged in the integration, maintenance, installation, debugging, maintenance and robot sales of Yaskawa robots. "Honesty and trustworthiness, quality first, mutual benefit and win-win" is our consistent business purpose, and "... fangyu(shanghai)automation technology co.,ltdIt is mainly engaged in the integration, maintenance, installation, debugging, maintenance and robot sales of Yaskawa robots. "Honesty and trustworthiness, quality first, mutual benefit and win-win" is our consistent business purpose, and "...

+ Read More

Get in touch with us

  • Reach Us
  • Fangyu(shanghai)Automation Technology Co.,Ltd
  • Room 1702. Building 4 Lane 658,GuangfulinRoad. Songiiang District Shanghai
  • https://www.robotsarms.com/

Leave a Message, we will call you back quickly!

Email

Check your email

Phone Number

Check your phone number

Requirement Details

Your message must be between 20-3,000 characters!

Submit Requirement