0.108Inch～0.125Inch Wire Hydraulic Stuffing Box And Hand Pump And Hose Pressure

Product Specification

0.108Inch～0.125Inch Wire Hydraulic Stuffing Box And Hand Pump And Hose Pressure Control Equipment

Introduction

The hydraulic stuffing box is a ground pressure control device used to seal the wire in the wireline operation. The sealing of the wire is realized by the rubber sealing disc. The stuffing box is equipped with a preventer plug to seal downhole pressure after a wire break. The pressing mode of sealing disc is hydraulic remote control and manual. The Stuffing box is mainly composed of three parts: pulley support assembly, body assembly and control cylinder assembly.

Technical specification

Specification                     16” 5K Hydraulic

Applicable Wire Size          0.108Inch～0.125Inch

Pulley diameter                  16Inch  (406.4mm)

WORK PRESSURE            5000psi(35Mpa)

CONNECTION                   5-4ACME.OType

Safety load                         25KN  ( Wireline 12.5KN)

weight                              27.5kg

Any size can be customized according to customer requirements.

Performance test:

1. Tie the knot at the stopper of the hydraulic stuffing box after the steel wire is pierced from the upper part;

2. Install the pressure test connector and connect the pressure test pipeline;

3. Connect the hand pressure pump line to the control cylinder, and first press to 21MPa; Manual capping can also be used to tighten the sealing      steel wire;

4. Start the pressure test pump for pressure test, the test pressure is 52.5MPa, hold the pressure for 15 minutes, fill in the test record card.

Notes

1 After adjusting the hydraulic cylinder and adjusting the bearing clearance properly, pay attention to tightening the hexagon flat end setting screw;

2. Regularly add sealing grease to the deep groove ball bearing on the pulley shaft;

3. Pulley bearing with grease, such as blocking or abnormal sound must be replaced immediately;

4. Storage or transportation should be fixed firmly to prevent bumping pulley.

◆About Baoji RuiXin Slickline Tools

Baoji Ruixin Energy Equipment Co., Ltd. was established in 2012. It is an IS0: 9001-2015 and API Q1 system certified technology research and development organization specializing in the design and manufacture of steel wire, cable and coiled tubing tools. With strong new product research and development capabilities, it has obtained 12 national utility model patent certificates and 1 invention patent certificate. Undertook two prefecture-level and provincial-level scientific research projects. Our products include wireline wireline wellhead blowout prevention equipment, wireline downhole tools and coiled tubing downhole tools. At present, we have provided professional equipment and technical support to more than 50 oilfield service companies in various regions at home and abroad.

◆Strict quality control system

Steel wire working tools are certified by API, and all manufacturing are strictly in accordance with API system, including quality control management, environmental management and occupational health and safety management. For each wire working tool and each part, we have achieved traceability from raw materials, production process to product shipment.

◆Hard work, after-sales service

On-site technical guidance exchanges with each other. Our sales and technical personnel communicated well with front-line engineers and technical experts on the job site, and solved technical problems such as material selection, sealing structure optimization, and accident handling in complex environments. And carried out many technical exchanges and friendly cooperation. We have done a good job of product after-sales service for customers, and we provide customers with more satisfactory services. We would like to thank more and more customers for their support and trust. In the future, we will do better.

Welcome to contact us at any time.