Ruixin Energy Equipmnet
| Payment Terms | T/T |
| Supply Ability | 1 set 3 weeks |
| Delivery Time | 3-4 weeks |
| Packaging Details | Wooden Box |
| Name | B Shifting Tool Wireline Running Tool |
| FN | 2.313inch |
| Service | STD&H2S |
| Connection | SR,QLS,BLQJ,HDQRJ |
| Application | Slickline Wireline |
| Material | Alloy Steel&Nickel Alloy |
| Brand Name | Ruixin |
| Model Number | 2.81inch |
| Certification | API |
| Place of Origin | China Baoji |
View Detail Information
Explore similar products
H2S Nickel Alloy XX Plug Wireline Running Tool Cylinder Mandrel 1.875 Inch
B Type Selective Positioning Tool Wireline Running Tool 2.313 Inch
BO Type Selection Positioning Slickline Tool 2.313 Inch
Alloy Steel Slickline Wireline Tool BO Type Selection Positioning Wierline
Product Specification
| Payment Terms | T/T | Supply Ability | 1 set 3 weeks |
| Delivery Time | 3-4 weeks | Packaging Details | Wooden Box |
| Name | B Shifting Tool Wireline Running Tool | FN | 2.313inch |
| Service | STD&H2S | Connection | SR,QLS,BLQJ,HDQRJ |
| Application | Slickline Wireline | Material | Alloy Steel&Nickel Alloy |
| Brand Name | Ruixin | Model Number | 2.81inch |
| Certification | API | Place of Origin | China Baoji |
| High Light | Alloy Wireline B Shifting Tool ，Slickline B Shifting Tool ，B Shifting Wireline And Slickline Tools | ||
B Shifting Tool Wireline Running Tool
I.Introduction:
B Shifting Tool used to place the A and X-type closed sliding sleeves in the open or closed position.
B Shifting Tool which can shift XA, RA, XO, XD, A, C, CB, WB, L and CM-type sliding sleeves.
The selection key can be used as a non-self-release type but released by a shear pin.
B-type self-release tools cannot pass through the first S-type seating joint.
II. Technical parameters:
1. Specification: 2.813";
2. Salvage neck: 2.313";
3. Connection thread: 1-1/16-10UN;
4. Applicable sliding sleeve specification: 2.813".
III Structural features:
B Shifting Tool is composed of upper joint, collet, upper baffle ring, lower key baffle ring, body, spring, steel pin, screw, etc.
Both ends of the key are limited by upper and lower retaining rings, which are sleeved on the collet. When the upper and lower retaining rings are inserted into the collet, pinch the front part of the collet so that the upper and lower retaining rings can pass through the collet smoothly. The spring in the middle plays a role in supporting the key. Role. Finally, the collet is sleeved on the body, and the steel pin is installed and screwed into the upper joint together with the body. After tightening, the tightening screw is installed.
When disassembling, unscrew the body at a time, flush out the steel pins, and remove the key and upper and lower retaining rings. According to the usage, replace the steel pin and spring.
IV. Daily maintenance:
1. Before going down the well, check whether the key can bounce up smoothly, and check the threads at both ends and the fishing neck at the same time.
2. When not in use temporarily, apply grease to the connecting thread and put a protective wire on it.
Welcome to contact us at any time.
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2012
Total Annual:
200-500
Employee Number:
One~Fifty
Ecer Certification：
Verified Supplier
Ruixin Energy Equipment Ruixin Energy Equipment is slickline manufacturer focused on wireline PCE , wireline tools, coiled tubing tools, etc.. Our factory and technology R & D center is Located in the national technology enterprise incubation industry park - 401B, High-... Ruixin Energy Equipment Ruixin Energy Equipment is slickline manufacturer focused on wireline PCE , wireline tools, coiled tubing tools, etc.. Our factory and technology R & D center is Located in the national technology enterprise incubation industry park - 401B, High-...
Get in touch with us
Leave a Message, we will call you back quickly!