15KW 300MPM 300m/S Automatic Coil Winding Machine

Product Specification

Cable rewinding and packing machine coil winding machine automatic cable coiler cable spooling machine

II. Technical specification:

1.800 Motor drive PAYOFF

1) Motor:7.5KW

2) Spool:PN630-800

2.Vertical cable accumulator

1. Vertical type, 2 meters height
2. Tension Control: Automatic Balance Control of Balance Stand Potential
3. Drive: Mechanical Drive
4. Store wire length:12M
5. Guide Wheel: Diameter: ID300mm Material: Aluminum alloy wheels 5 to 6 pcs, groove depth delta = 25mm
6. Anti-collision: compression spring
7. Double Detection Device: Potential Balanced Tension Control
8. Safety device: Front and rear end limit switch, synchronous stop when wire break.
9. One meter counter, the upper part is meter device, and the lower part is tool box.

2. C1040 coiling labeling wrapping all-in-one machine

I. Equipment composition:

No.	Name	Specification	Brand	Qty.	Function		Remark
1	Vertical tension frame	Φ300		1 set	Tension
2	Coiling labeling wrapping all-in-one machine	400		1 set	Coiling +labeling packaging
3	Painting: A. Germany blue □; B. Computer color □; C. New blue grey □; D. Or sample color provided by customer □
4	Direction of production line: Left pay-off → Right take-up □ Right pay-off → Left take-up □
5	The whole set of production line installation length see installation schematic diagram

1040 coiling labeling wrapping all-in-one machine

A. Characteristics:

1). Can be wire feeding by the pay-off unit or directly connected to extruder.

2). The yield of wire coil four times manual coiling (take 200M wire coil for example).

3). The automatic glue film coiling machine for wire coil automatic packaging and labeling after coiling.

4). The yield 7 times manual when automatic coiling and winding glue film.

5). This machine adopts servo motor flat cable system, the wire coil is beautiful.

6). Adopt touch screen man-machine interface operation panel, easy to operation.

7). The RAM of microcomputer can store 99 different of wire coil specifications, when you need to change the products specification, can be read stored specification, do not need to input again, can produce immediately.

8). The machine equipped with automatic detects error function, can be send out a warning to remind the operator when there is a problem.

B. Performance specification:

1). Power: AC 380V, three phase, 50Hz (China), or specify by customer.

2). Operation direction:

3). Suitable for ψ1-ψ10mm building wire.

4). Design speed of cradle plate head: 780 RPM Max.

5). Wire coil size:

6). Outer diameter ψ400mm Max. × height 50～120mm;

7). Inner diameter of wire coil depend on cradle plate head specification, the specification range: ψ140mm,height 65-90mm.

8). Wire feeding mode of finished product: hold wire type.

9). Rule guide unit: rule counting unit 0.01M, prediction automatic speed down, automatic cradle plate action flow when meter is arrived.

10). Traverse device: Adopts the Japanese Mitsubishi servo motor traverse, synchronization with mainframe of cradle plate.

11). The whole machine control by electrical circuits: adopts the Mitsubishi microcomputer programmable controller (PLC).

12). Operation panel using the man-machine interface (Graphic Operator Interface).

13). Instrument and switch on the operation panel: touch screen and speed regulation knob.

14). Speed adjusting by speed regulation knob.

15). The machine PLC have power frequency spark tester contact.

16). Used in BV wire spark test, can be automatic spark breakdown point or continue to coiling function after artificial marks.

17). The machine PLC have diameter measuring instrument contact.

18). When the diameter not reached standard, can be automatic eliminate waster wire or continue to coiling function after artificial marks.

Others

1. Paint:Paint after rustproof production according to our standards or paint according to buyer’s requirements

2. The consumables:Capstan (6 months of guarantee);Distributing guide pulleys; Traversing guide pulleys; Flat belts

3. The period of guarantee:12 months for mechanical part (excluding the consumables) after the shipment;6 months for electrical parts after the shipment.Permanent maintenance (charge)

4. Test:

A. Employees form both of the company do the test together in our Company after the finish of the order;

B. If it is necessary, our staffs do the test in buyer’s company, the buyer offers flight ticket, board and lodging (USD80/DAY)

C. The buyer supplies all the material for the test

5. Maintenance: We offers long-distance mechanical support for free; if the engineers are needed to be in the buyer’s company for maintenance, the buyer offers flight ticket (SHANGHAI), board and lodging. (80USD/DAY)

6. Wooden pallets packing for shipping

SPECAIL STATEMENT

All information above are carefully checked, our company reserve explain right if any printing mistake or any misunderstanding.

Another: Sorry for noting no advanced notice for the techniques improvement or upgrade on the machine; Any change on the appearance or color, please refer to the real object.