6.0-2.5mm Straight Line Wire Drawing Machine With 1500kg / Hour Capacity

Product Specification

6.0-2.5mm Straight Line Wire Drawing Machine With 1500kg/Hour Capacity

Straight wire drawing machine is one of the common metal wire processing equipment. Straight wire drawing machine can stretch high, medium and low carbon steel wire, stainless steel wire, copper wire, alloy copper wire, aluminum alloy wire, etc. Line processing. Accurate meter counting with error of 0.1%; fixed-length automatic deceleration and parking; disconnection detection and automatic parking; forward and reverse jog and left-right linkage of any reel; various fault information and processing information display; various motion information monitoring. And support any mold matching process, after the mold is worn, it is automatically compensated by tuning, and it is not easy to break the wire. And there is a jumper device that can cut off the reel and pull it arbitrarily to adapt to different processes. According to user needs, remote control and remote diagnosis can be implemented based on industrial Ethernet.

6.0-2.5mm Straight Line Wire Drawing Machine With 1500kg/Hour Capacity

The straight wire drawing machine is famous for its high efficiency and low cost. When it is applied,

it will bring huge cost-reduction as a result of its low power consumption, high percent of pass and yield rate.

6.0-2.5mm Straight Line Wire Drawing Machine With 1500kg/Hour Capacity

The drum adopts narrow slit water cooling, and the drawing die adopts direct water cooling; the cooling effect is good; Adopting a first-class strong narrow V-belt and a first-order plane secondary enveloping worm gear pair transmission, the transmission efficiency is high and the noise is low;With a fully enclosed protection system, the safety is good;Tuned with air tension, smooth drawing;

It adopts AC frequency conversion control technology (or DC programmable program control system) and on-screen display.

It has high automation, easy operation and high quality of drawing.

6.0-2.5mm Straight Line Wire Drawing Machine With 1500kg/Hour Capacity

Error 0.1% accurate meter; fixed length automatic deceleration and parking; disconnection detection and automatic stop; any reel positive and negative jog and left and right linkage; various fault information and processing information display; various motion information monitoring. The mold-matching process, after the mold is worn, is automatically compensated by tuning, and it is not easy to break the wire. 

6.0-2.5mm Straight Line Wire Drawing Machine With 1500kg/Hour Capacity

Machine Parameters and characteristics:

6.0-2.5mm Straight Line Wire Drawing Machine With 1500kg/Hour Capacity​ advantage / Selling points:

Suitable wire drawing materials: welding rod; welding wire (gas shielded welding wire, submerged arc welding wire, flux cored wire, etc.); steel wire (high, medium and low carbon steel wire, stainless steel wire, prestressed steel wire, tire steel wire, hose steel wire, spring steel wire, steel Cords, etc.; wire harnesses (aluminum-clad steel wire, copper wire, aluminum wire, etc.); various metal wires such as alloy wire.

Notes:

Equipment should be inspected monthly (closed for 4 hours) for thorough maintenance and overhaul.

daily maintenance:

1) Keep the outside of the equipment clean and check that the air supply lines and quick connectors are good.

2) Lubrication of the upper and lower bearing housings and the lifting screw (oil gun refueling).

3) Check the belt and its tension (if the tension is too loose, adjust to the appropriate level).

4) Check the belt and its tension (if the tension is too loose, adjust to the appropriate level).