Wuxi Weishi Industrial Complete Equipment Co., Ltd.
| Product Name | Induced Draft Crossflow Cooling Tower |
| Casing Material | special Mg-Al-Zn alloy coated steel or stainless steel |
| Capacity | 30 to 366 nominal tons |
| Feature | high efficiency |
| Application | induction furnace cooling/casting cooling |
| Type | Automotive Industrial Cooling; Solar Energy Cooling; Chemical Industrial Cooling |
| Model Number | GHM Series |
| Place of Origin | Jiangsu, China |
View Detail Information
Explore similar products
CCCT Crossflow Closed Cooling Tower Induced Draft Crossflow
6 To 305 Nominal Tons Induced Draft Counter Flow Closed Circuit Cooling Tower
High Efficiency Induced Draft Counter Flow Closed System Cooling Tower
Product Specification
| Product Name | Induced Draft Crossflow Cooling Tower | Casing Material | special Mg-Al-Zn alloy coated steel or stainless steel |
| Capacity | 30 to 366 nominal tons | Feature | high efficiency |
| Application | induction furnace cooling/casting cooling | Type | Automotive Industrial Cooling; Solar Energy Cooling; Chemical Industrial Cooling |
| Model Number | GHM Series | Place of Origin | Jiangsu, China |
| High Light | Induced Draft Closed Loop Cooling Tower ，30 Tons Closed Loop Cooling Tower ，366 Tons Closed Loop Cooling Tower | ||
30 To 366 Nominal Tons Induced Draft Crossflow Cooling Tower Closed Loop Cooling Tower
Working Principle:
Induced draft cross-flow cooling towers use an induced draft fan, usually located at the top or side of the cooling tower, to draw air from the inside of the cooling tower.
This type of cooling tower is cross-flow, meaning that the cooling water flows relatively perpendicular to the air flow direction, which helps increase the heat exchange surface area and improve cooling efficiency.
Structural Features:
Induced draft cross-flow cooling towers usually have induced fans, fill layers and water collectors at the top or side.
Cooling water flows in from the top of the tower, passes through the fill layers, and exchanges heat with the rising air. The heat in the hot water is transferred to the air, thereby cooling the water temperature.
Advantages:
The design of the induced draft cross-flow cooling tower increases the contact area between the cooling water and the air, which helps improve the heat exchange efficiency.
The cross-flow design can reduce fill resistance, improve cooling effect, and reduce fan power consumption.
Application Fields:
Induced draft cross-flow cooling towers are widely used in various industrial fields, especially in power plants, chemical plants and other industrial processes that require a lot of cooling.
These cooling towers can help maintain normal operating temperatures for industrial equipment and reduce the heat generated during production processes.
Product Specification:
|
Model No |
Nominal Flow Rate (Ton) |
Fan | Circulating Pump | Connectig Pipe(mm) | OverallDimensions(mm) | Weight | |||||||
|
Power (kw) |
Air volumn(m3/s) |
Power (kw) |
Air volumn(m3/h) | inlet/outle | make up | drainage | L | W | H |
NET (kg) |
Running (kg) |
||
| GHM-225 | 30 | 1.1×2 | 3.7×2 | 1.5 | 45 | DN80 | DN25 | DN40 | 2540 | 940 | 2200 | 1020 | 1820 |
| GHM-230 | 37 | 1.1×2 | 3.7×2 | 1.5 | 45 | DN80 | DN25 | DN40 | 2960 | 940 | 2200 | 1050 | 2020 |
| GHM-235 | 43 | 1.1×2 | 3.7×2 | 1.5 | 45 | DN80 | DN25 | DN40 | 2960 | 1940 | 2200 | 1100 | 2100 |
| GHM-340 | 49 | 1.1×3 | 3.7×3 | 2.2 | 60 | DN80 | DN25 | DN40 | 3360 | 1940 | 2200 | 1310 | 2540 |
| GHM-350 | 61 | 1.1×3 | 3.7×3 | 2.2 | 60 | DN80×2 | DN25 | DN40 | 3360 | 1940 | 2730 | 1450 | 3080 |
| GHM-365 | 79 | 1.5×3 | 5.1×3 | 2.2 | 60 | DN80×2 | DN25 | DN40 | 3360 | 1940 | 2730 | 1520 | 3200 |
| GHM-380 | 98 | 1.5×4 | 5.1×4 | 2.2 | 114 | DN80×2 | DN25 | DN40 | 4220 | 2240 | 2680 | 2050 | 4920 |
| GHM-390 | 110 | 1.5×4 | 51x | 2.2 | 114 | DN80×2 | DN25 | DN40 | 4220 | 2240 | 2680 | 2100 | 5000 |
| GHM-3100 | 122 | 1.5×4 | 5.1×4 | 2.2 | 114 | DN80×2 | DN25 | DN40 | 4220 | 2240 | 2840 | 2150 | 5100 |
| GHM-3110 | 134 | 1.5×4 | 5.1×4 | 2.2 | 114 | DN80×2 | DN25 | DN40 | 4220 | 2240 | 2840 | 2250 | 5250 |
| GHM-5125 | 152 | 1.5×4 | 5.1×4 | 3.7 | 140 | DN100×2 | DN40 | DN40 | 4740 | 2240 | 2910 | 2800 | 6800 |
| GHM-5150 | 183 | 2.2×4 | 6.3×4 | 3.7 | 140 | DN100×2 | DN40 | DN40 | 5440 | 2240 | 2910 | 3200 | 7820 |
| GHM-5175 | 213 | 2.2×4 | 6.3×4 | 3.7 | 140 | DN125×2 | DN40 | DN40 | 5440 | 2240 | 2910 | 3300 | 8000 |
| GHM-7200 | 244 | 4x4 | 16.7×4 | 5.5 | 160 | DN125×2 | DN40 | DMao | 5840 | 2900 | 3260 | 5000 | 9000 |
| GHM-7225 | 274 | 4x4 | 16.7×4 | 5.5 | 160 | DN125×2 | DN40 | DN4o | 5840 | 2900 | 3470 | 5500 | 10000 |
| GHM-7250 | 305 | 4x4 | 16.7×4 | 5.5 | 160 | DN150×2 | DN40 | DN40 | 6420 | 2900 | 3470 | 6500 | 11500 |
| GHM-7275 | 335 | 4×4 | 16.7×4 | 5.5 | 160 | DN150×2 | DN40 | DN40 | 6420 | 2900 | 3470 | 6800 | 11800 |
| GHM-7300 | 366 | 4×4 | 16.7×4 | 5.5 | 160 | DN150×2 | DN40 | DN40 | 6420 | 2900 | 3470 | 7000 | 12000 |
NOTE
Nominal Tons are based upon temp.drop 35~29.5℃/95~85°F,WBT 25.5℃/78°F,and 0.681 m³/hr/ton.
Company Details
Business Type:
Exporter,Trading Company,Seller
Year Established:
2015
Total Annual:
1000000-1200000
Employee Number:
100~200
Ecer Certification：
Verified Supplier
Wuxi Weishi Industrial Complete Equipment Co., Ltd. was established in May 2015. The company is mainly engaged in environmental protection EPC general contracting (bulk material transportation/flue gas treatment/water treatment) and heavy industrial equipment trading have formed the "two wings ... Wuxi Weishi Industrial Complete Equipment Co., Ltd. was established in May 2015. The company is mainly engaged in environmental protection EPC general contracting (bulk material transportation/flue gas treatment/water treatment) and heavy industrial equipment trading have formed the "two wings ...
Get in touch with us
Leave a Message, we will call you back quickly!