Safety Force Measuring Controller , Digital Weight Indicator 4-20mA Output

Product Specification

Force Measuring Controller, With LED display, RS232, RS485, 4~20mA Output, Overlay Customization Available

BST106-B60[F] is suitable for 2-D Peak Value Force Measuring.

There are several kinds of application:

1. Positive&Negative Direction Real-time Force Value Display

2. Peak Value Detection / Display Holding

3. DO Alarm Output and AO/Digit Transmission.

Optional Peak Detection Modes: Positive Direction Mode / Negative Direction Mode / Double Direction Mode.

Optional Peak Detection Start&Stop Modes: Threshold Mode / DI Pulse Mode / DI Switch Mode / DI Jump Mode.

Technical Specification:

Detail Specification:

Executing Standard

• CMC GB/T 7724-2008PRC National Standard.
• OMIL R76: 2006International Recommendation.
• Accuracy Grade: III.
• Verification Accuracy: 0.03%.
• Static Force Measuring Accuracy: 0.2%~0.5%.

Display

• 6+8 Red LED digital tubes for English character and digit display.
• Force Value Display Range: -60,000~+60,000.
• Force Capacity: Setting Range 1~60,000.
• Scale Division: Optional 1, 2, 5, 10, 20, 50, 100, 200, 500.
• Display Resolution: 1/60,000.
• Force Value Unit: Optional kg, t, g, none.
• Decimal Point: Optional 0, 0.0, 0.00, 0.000, 0.0000.
• Display Refreshing Time: Setting Range 0.01~1.00s.

Keypad

• Model Panel-mounting: 4-key English keypad.
• Model Explosion-proof: 6-key English keypad.
• Menu&Shortcut mode operation with key tone.

Loadcell Interface

• Excitation Voltage/Max. Current: DC9V/120mA [4-350Ω loadcells].
• Signal Input Range: -22.5~+22.5mV.
• Output Sensitivity of Loadcell: 1.0~2.5mV/V.
• 24-bit ∑-△ADC with internal resolution 1/1,000,000.
• Sampling Frequency: 3200Hz.
• Optional Special Anti-vibration Digital Filtering Algorithm for precise force measuring, stable display and rapid response.
• Zero Drift: ±0.1μV/℃ RTI (Relative to Input).
• Gain Drift: ±5ppm/℃.
• Non-linearity: 0.005%FS.

Switch/Analog Signal Interface

• 6 Normally Open Switch Inputs [DI].
• 5 Normally Open Relay Switch Outputs [DO]: AC250V/DC24V, 1A.
• 1 Optional&Definable Analog Signal Output: 4~20mA, Non-linearity: 0.05%FS.

Digital Communication Interface

• COM1: RS232.
• COM2: RS485.
• Connectable: Host IPC/PLC and LED Remote Display.
• Operating Specification
• Operating Voltage
• Model Panel-mounting: DC24V±20%.
• Model Explosion-proof: AC110~240V, 50/60Hz.
• Max. Power Consumption: 5W.

Outline Size

• Model Panel-mounting: 110×62×150mm [W×H×D].
• Model Explosion-proof: 256×290×166mm [W×H×D].

Panel Cut-out Size

• Model Panel-mounting: 94×47 mm [W×H].
• Operating Temperature: -25℃ to +45℃.
• Storage Temperature: -30℃ to +60℃.
• Relative Humidity: Max. 85%RH.
• Application Environment of Model Explosion-proof
• Explosion gas environment: Zone 1&2.
• Classes of explosion gas mixture: IIA, IIB.
• Temperature grades of explosion gas mixture: T1~T6.
• Ex-mark: Ex d IIB T6 Gb.

Protection Level

• Front Panel of Model Panel-mounting: IP65.
• Model Explosion-proof: IP65.

Weight

• Model Panel-mounting: Approx. 0.5kg.
• Model Explosion-proof: Approx. 9.2kg.

Operation Interface:

Demension:

Terminal: 

Application:

Optional Type: Explosion-proof one