10~200m3/H Constant Pressure Water Supply System Water Treatment Plant

Product Specification

Water Treatment Plant Accessories

10~200m3/h Constant Pressure Water Supply Equipment Water Treatment Plant Accessories

Product Introduction

10~200m3/h Constant Pressure Water Supply Equipment is a new type of tower-free water supply equipment, which is composed of pump unit control equipment and pressurization and pressure regulation equipment. The water supply capacity is determined by the pump unit, and the coordinated operation of the system is controlled by the control system. The main function of the pressurization and pressure stabilizing equipment is to store energy and pressure, cope with a small amount of water supply and normal pipeline leakage, and it is also an indispensable part of the implementation of automatic control. When a large amount of water is used, the pipe network pressure drops and the pump automatically starts to supply water.

Technical Parameters

1. pressure tank working pressure: 0.6MPa, 1.0MPa, 1.6MPa.

2. pressure water tank fire storage volume is greater than: 150L, 300L, 450L.

3. The pressurized water volume of the air pressure tank is greater than 50L.

4. the pressure tank buffer water capacity backlog difference is 0.02~0.03MPa, the pressure stabilized water capacity backlog difference is 0.05~0.06MPa.

5. working pressure ratio: a b value of 0.6~40℃.

Advantages of using constant pressure water supply

1. Advanced technology: frequency converter and PLC automatic control, equipment can according to the actual requirements of water supply in various situations, to realize intelligent constant pressure water supply;

2. Energy saving and high efficiency: the system can set the pressure parameters according to the need, the system can automatically adjust the speed of the pump and the number of pumps according to the set pressure parameters, so that the equipment can run in the best state of energy saving and high efficiency;

3. Pressure stable water supply: the system implements a closed-loop control, automatically adjusting the section pressure and system pressure difference, so that the pressure is kept constant;

4. Stable operation: by frequency converter or frequency converter plus intelligent controller automatic control system, the operation is very simple;

5. motor, pump life extension: the pump are soft start, the impact current when starting is eliminated. Pump cycle start, so that the backup pump will not rust or wear out due to long-term use. To achieve regular inspection of fire control;

6. Perfect protection function: it has a lack of phase, overpressure, overcurrent, overheating, overload and other protection. If the water pump runs out of trouble, it will automatically stop working and alarm output; The system has the common functions of self-test, fault display, fault judgment, fault memory, automatic start of standby pump and so on.

7. Small flow sleep function: It can be equipped with a small attached pump so that the system can run at night or under other small flow conditions, and automatically turn off the main pump and start the small pump, thereby avoiding the waste caused by starting the high-power water pump.

8. Run action function: Program and set a convenient and simple inverter and controller, which is easy to grasp and operate.

Application

High-rise buildings, urban residential areas, enterprises and other domestic water. All types of industrial water. Various water plants, sewage treatment plants, agricultural irrigation stations and other water supply systems. Air conditioning hot and cold water circulation system, boiler constant pressure water supply system. Renovation of various old water supply systems.

DETAILS

COMPANY REAL SHOW

Chengdu Yuanjin Environmental Protection Engineering Co., Ltd. was established in 2012 with a registered capital of 20 million. The production workshop covers an area of 1,400 square meters. There are more than 20 employees, including 2 senior engineers, 4 intermediate engineers, and 14 professional technicians; our company's technical team, all It is composed of a group of people who have worked in the field of water treatment for a long time. The company is a high-tech enterprise. It has obtained a number of certificates such as a patent certificate, nine software copyrights, a construction enterprise qualification certificate, and ISO9001 international quality management system certification. The environmental protection project will strive to build the most well-known Chengdu water treatment company. We have always adhered to the tenet of "quality first, customer first" and the management policy of "integrity, pragmatism, responsibility and efficiency", and advocated new ideas and new technologies. Tolerance for failure is the company's philosophy, which ensures that every employee of our company can pay for the company wholeheartedly, and that every one of our customers is satisfied with the services provided by the company.