120m3/D Construction Site MBR Wastewater Treatment Equipment For Domestic Use

Product Specification

MBR Wastewater Treatment Equipment

MBR Wastewater Treatment Equipment For Construction Site Workers' Domestic Sewage

Wastewater treatment equipment Description

MBR Wastewater Treatment Equipment is short for membrane bioreactor, which combines membrane separation technology with traditional biotechnology organically. Its working principle is to introduce the hospital sewage into the reactor, and then use the biological treatment technology to fully decompose and transform the organic pollutants in the sewage, and then use the effective separation of ultrafiltration membrane and microfiltration membrane to complete the solid-liquid separation of sewage, and finally achieve the purpose of purification of sewage.

Working Principle

The domestic sewage is filtered through the grid to remove the impurities of larger particles, and then into the regulating tank. Then the sewage is lifted by the sewage lifting pump to the hydrolytic pool for hydrolysis and acidification, and then flows into the anoxic pool, and then the sewage enters the aerobic pool to degrade most organic matter. The lifting pump pumps the sewage into the MBR tank, where it further degrades organic matter, and intercepts bacteria, SS and other substances through the micropores of the MBR.

Application

Residential/village/market town/
station/airport/harbour terminal/
ship factory/tourist spot/
earth warehouse/scenic area similar to other waste water          

Structure

MBR integrated equipment mainly consists of five parts, such as grid well, anoxic tank, contact oxidation tank, regulating tank and anoxic tank.

1. Grid well: grid well is to isolate suspended solids and impurities in wastewater, so as not to affect the later treatment of equipment.

2. Anoxic tank: anoxic tank water into the anoxic tank for further decomposition of organic matter, sewage ammonia, nitrogen, phosphorus removal, anoxic tank upper sedimentation into contact oxidation tank, and sludge through the reflux pipe into the anoxic tank, so as to increase the concentration of anoxic tank, improve the anaerobic tank treatment efficiency. When the concentration of the anaerobic tank is saturated, the reflux valve is closed, and the valve flowing to the sludge concentration tank is opened to allow the sludge to flow directly into the sludge concentration tank.

3. Contact oxidation pool: when the water from the anaerobic pool flows into the contact oxidation pool, the sewage is fully contacted with the oxidizing bacteria (stereoelastic packing) in the contact oxidation pool, the sewage will decompose into CO2 and H2O, and the CO2 in the water will be discharged through the action of the blower. The sludge is composed of dead bodies of bacteria.

4. Regulating pool: According to the characteristics of domestic water, the time period of water discharge is not uniform, and the time period of their discharge is basically set as the peak period of early, middle and late. The regulating pool can adjust the uneven water supply, so that the post-processing can operate normally. A water level controller is set in the regulating pool, so that the automatic control can be effectively implemented.

5. Anaerobic tank: sewage into the anaerobic tank, through the mixing effect of the mixer sewage and anaerobic bacteria fully combined. Anaerobic tank can decompose microorganisms and organic matter in sewage to produce CO2 methane and other substances.

PRODUCT DETAILS

PRODUCT ADVANTAGES

THE TREATMENT EFFECT IS OBVIOUS

After sewage treatment,it can be used for greening,toilet and other reclaimed water reuse

APPLICABLE TO ALL SCENARIOS

REAL SHOT DISPLAY

COMPANY REAL SHOW

Chengdu Yuanjin Environmental Protection Engineering Co., Ltd. was established in 2012 with a registered capital of 20 million. The production workshop covers an area of 1,400 square meters. There are more than 20 employees, including 2 senior engineers, 4 intermediate engineers, and 14 professional technicians; our company's technical team, all It is composed of a group of people who have worked in the field of water treatment for a long time. The company is a high-tech enterprise. It has obtained a number of certificates such as a patent certificate, nine software copyrights, a construction enterprise qualification certificate, and ISO9001 international quality management system certification. The environmental protection project will strive to build the most well-known Chengdu water treatment company. We have always adhered to the tenet of "quality first, customer first" and the management policy of "integrity, pragmatism, responsibility and efficiency", and advocated new ideas and new technologies. Tolerance for failure is the company's philosophy, which ensures that every employee of our company can pay for the company wholeheartedly, and that every one of our customers is satisfied with the services provided by the company.