Fresh Water Well and Salt Well Drilling Mud Additives Anionic Polymer Grade

Appearance:

Off-White Granular Powder

Ionic Charge:

Anionic

Particle Size:

20-100 mesh

Molecular Weight:

Very High

Hydrolysis Degree:

High

Solid Content:

89% Min

Approximate Brookfield viscosity at 25° C:

@ 1.0%

>2000

@ 0.50%

>800

@ 0.25%

>400

Bulk Density:

About 0.6-0.8

Specific Gravity at 25°C:

1.01-1.1

Recommended 

Working Concentration:

0.1-0.5%

PH (1% aqua solution):

6-9

Storage Temperature (°C): 

0 - 35

Shelf Life:

2 years

1. Well Drilling Mud Additives:

Especially Temperature Tolerant and Salt Resistant for sea(salt)based oil Drilling.

In this area, as mud additives to increase the viscosity of water to impove the effectiveness of the water flooding process.

2. Industrial Wastewater Treatment:

Dosing polyacrylamide can reduce the consumption of coagulant and speed up sedimentation.

3. Textile Auxiliary Agent:

PAM can be added with some other chemicals to prepare chemical grout, is used to starch textiles, can improve the adhesive property, penetrability and desizing performance, enables the textile to have electrostatic prevention performance, reduces the desizing rate, and reduces the starch mixing spots, cloth machine breaking efficiency, and falling objects.

4. Paper-making:

PAM can be used as a fixing agent, residency agent, filtration aid and paper dry and wet intensity reinforcing agent in the paper-making industry.

5. Mine Washing:

PAM can be used in coal washing tailing centrifugal separation, for sedimentation and filtration of coal powder and coal mud, and can improve the recovery rate of coal powder and the filtration speed.

6. Sewage Water Treatment:

When sewage water systems are acidophilic, it is more suitable to select nonionic-polyacrylamide, the product can be matched with PAC, aluminium sulphate and the like, and it has the best effect in water treatment.

7. Metallurgical Mineral Dressing:

It can be used in floatation and smelting of Zinc, manganese and copper mines, its leachate and slag can be added into PAM to improve the separation efficiency.

8. Sand Prevention and Solidification:

The polyacrylamide is dissolved into 0.3% concentration, cross-linking agent is added, and the product can be sprayed on desert to prevent and solidify sand.

9. Chemical mudding agent:

Polyacrylamide can be used as chemical mudding agent for plugging water of dikes, ground foundation, channels and the like.

10. Oil field profile controlling and water-plugging agent:

The product can be matched with lignocellulose, a certain amount of chemical adhesive can be added, and the product can be used as oil field profile controlling and water-plugging agent.

11. Soil humectants:

It can preserve water and solidify sand for soil and can play a role of humectant on slope grass planting, tree planting, and sand solidification and dust prevention of soil.

1

Temperature torerant and Salt Resistant

2

Productivity over 65000mt annual.

3

Non corrosive of suggested dosage, economical and effective at low levels.

4

Can eliminate the use of alum & further ferric salts when used as primary coagulants.

5

Reduction in sludge of dewatering process system.

6

10 years manufacturing experience, with more than 20 technical engineers

1

Dissolving 

concentration:

Polyacrylamdie (polyelectrolyte/flocculant) should be standardly be dissolved to 0.1-0.5% concentration.

2

Dissolving 

time:

The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. Incomplete mixture of flocculant or lumping may inhibit the performance of the flocculant. 

3

Agitation 

speed: 

The ideal revolution of the agitator is between 200-400rpm. A high speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant. An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank.

4

Application 

and Dosage:

The dosage range of varies from 1 - 3.0 ppm depending upon the type of effluent and application. Advised to do jar tests for evaluating the functioning and approximate dosage.

5

Jar Test: 

Put sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the flocs properly at this time and note the sedimentation and clarity of top solution.