Diamond Mine Flocculant Chemicals High Molecular Weight Polyelectrolyte Similar

Jar Test:

Put sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the floc properly at this time and note the sedimentation and clarity of top solution.

Procedure and precautions upon dispersion and dissolving flocculants:
Dissolving time:

The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. Incomplete mixture of flocculant or lumping may inhibit the performance of the flocculant.

Agitation speed:

The ideal revolution of the agitator is between 200-400rpm. A high speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant.

Dissolving concentration:

Should be standardly be dissolved to 0.1-0.2% concentration.

Handling measures and precautions:
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

1. Blufloc Polyacrylamide (PAM) / Polyelectrolyte is water soluble polymer with Anionic, Cationic and Nonionic types.
2. The range of molecular weight is different, Anionic is from 5-22 million, Cationic is from 5-12 million and Nonionic is from 5-12 million, with a charge density ranging from 0-60%.
3. It is most often used to increase the viscosity of water (creating a thicker solution) or to encourage flocculation of particles present in water.
4. Due to the polar groups on the molecular chain containing a certain amount, it can through the adsorption of solid particles suspended in water, bridging between particles or through the charge and make the particle formation of large flocs condensation. So, it can accelerate the settlement of particles in suspension, have obvious to speed up the solution to clarify, promote filtering and other effects.
5. Mainly used for various industrial wastewater flocculation sedimentation, sedimentation and clarification treatment, such as iron and steel plant wastewater, electroplating wastewater, wastewater metallurgy, coal washing wastewater treatment, sludge dewatering. Can also be used to clarify and drinking water purification treatment, and sugar & juice mills.
6. Soluble in water, safe, non-toxic, hydrolytic stability, is not sensitive to the change of pH value, anti-chlorine. Harmless, no-flammable and non-explosive, it can be stored at room temperature, it cannot be placed in the sun. It is slightly acidic, when skin contact, wash immediately with plenty of water.

• Easily soluble in water; dissolves rapidly.

• Non corrosive of suggested dosage, economical and effective at low levels.

• Can eliminate the use of alum & further ferric salts when used as primary coagulants.

• Faster sedimentation, better flocculation.

• Non-pollution (no aluminum, chlorine, heavy metal ions etc.).

• 10 years manufacturing experience, with more than 20 technical engineers

• BWD-01 Water Decoloring Agent , for color removal for textile dyeing wastewater treatment and for other wastewater .
• Poly Aluminium Chloride(PAC) , for drinking water treatment for wastewater treatment.
• Polyacrylamide (PAM)/Polyelectrolyte , for water treatment, for suldge treatment.
• PHPA(Partially Hydrolyzed Polyacrylamide) For Drilling , for drilling mud additive in the oilfield.
• Ferric Sulphate , for drinking water and wastewater treatment.
• PolyDADMAC , for water treatment and for paper mills and for cosmetics.
• Polyamine, for drinking and wastewater treatment, sludge dewatering, paper making and oilfield.
• Aluminum Chlorohydrate(ACH) liquid & powder, for drinking water treatment and other fields.

A:

We can prive a certain quantity of free sample.

Give us your Fedex account to arrange sample.

Place order to Fedex .

A:

Give us your exactly quantity, packing, destination port or specs requirements to quote price.

A:

The best way to request sample to test, after confirmation, you can place trial order.

A:

No problem, we would like to grow up together.

A:

We can provide application methods to you.

A:

We discuss about to be an agent after some orders and trust.

A:

Yes, we have provided OEM service to lots of big and famous companies in the order.

A:

500kgs of MOQ.

A:

More than 50000tons annual year.

A:

Quality is the life of our company, in the past 15 years, quality brings us the benifits and gives us the vitality.

We can ensure the quality consistancy.

If you still don't trust us, you can request the third part company, such as SGS, to inspect and test the bulk cargo before shipment(you should bear the inspection expense).