High / Low Pressure Water Spray Nozzles Industrial Jet Mist Nozzle Low Pressure

Product Specification

Industria Jet Stainless steel Flat Air nozzle Spray Nozzle for working place Dust control

high /low pressure stainless steel water mist fog jet spray nozzle spray humidifier for use in industrial manufacturing​

Industria Jet Stainless steel Flat Air nozzle Spray Nozzle for working place Dust control

high /low pressure stainless steel water mist fog jet spray nozzle spray humidifier for use in industrial manufacturing

1, UYS-B Working Principle:

According to the siphon principle, a reasonable geometric surface structure is used at the nozzle outlet. The compressed air is ejected from the nozzle gas outlet at a high speed, and a negative pressure zone is formed around the outlet of the waterway. Since the pressure in the line and the pressure at the outlet of the nozzle water supply are poor, the water in the pipe is attracted to the nozzle outlet Where the water and compressed air are sprayed at a certain ratio at the nozzle outlet. Due to the turbulence of the jet and the aerodynamic action of the surrounding gas, the water flow is deformed, especially under the action of the pneumatic pressure and the surface tension, so that the water surface deformation is increasing, so that the water flow splits, the formation of water mist or unstable water droplets, Large water droplets are gradually broken into small water droplets or water mist.​

Industria Jet Stainless steel Flat Air nozzle Spray Nozzle for working place Dust control

high /low pressure stainless steel water mist fog jet spray nozzle spray humidifier for use in industrial manufacturing

Intelligent Control Mode, easy to operate and in high safety.

• Touch screen, easy to operate.
• Separate humidity control pipe for each area.
• With a Humidity & Temperature database, can support for printing
• High pressure, low pressure, Water leakage, power leakage Shutdown protection.
• Multi-modes way of control.

High efficiency, low cost, Low Noise

• To atomize 1L water per hour only need 4W power.
• Noise ≤65Db
• Separate power supply,separate control,timing switch
• Independent parameter setting, maintenance prompt, fault record

Industria Jet Stainless steel Flat Air nozzle Spray Nozzle for working place Dust control

high /low pressure stainless steel water mist fog jet spray nozzle spray humidifier for use in industrial manufacturing

Automatic Spray-Gun UYS-B

Make It Smarter Operation with Automated Spray Technology!

Low Pressure solid wide angle cone jet spray nozzle for ESD prevention in electronics factory

Original spraying systems are made-up with nozzle, pumps, sensors and other hydraulic and pneumatic
devices. Automated spray control can range from simple on/off control of automatic nozzles to sophisticated
real-time monitoring of process variables and automatic adjustment, including PWM and frequency control.

We provide turkey system (spray solution) to our customers, spray solution includes:
- Precise coating solution
- Humidifying solution
- Tank washing solution
- Blowing Air solution
- High pressure cleaning solution
- Dust Control solution
- De-Sox & De-Nox solution
- Etc.

Industria Jet Stainless steel Flat Air nozzle Spray Nozzle for working place Dust control

high /low pressure stainless steel water mist fog jet spray nozzle spray humidifier for use in industrial manufacturing

Main Benefits:
1- Cleaner and safer work environment
2- Reduced use of energy, water and chemicals.
3- Improve product and process quality.
4- Save human resource.

Ucloud gas-water mixing spray gun is composed of atomizing nozzle, control system and filter sterilization annex and other components. UYS-B spray gun with automatic clearance of the outlet scale and dust, the pneumatic needle valve with water-drip prevent function. Under the control of the intelligent control, it can control the the flow rate of the compressed air and thus control the reciprocating movement of the pneumatic needle valve. By this, the needle will clean the water scale and dust. When the control in the working status it has the cleaning function. When the compressed air is off or the pressure is lower than 0.2 Mpa, the needle will seal the water outlet part, and no water will come out. It can keep the large humidification and also assure the spray performance of the average droplets 5-10μm.

Industria Jet Stainless steel Flat Air nozzle Spray Nozzle for working place Dust control

high /low pressure stainless steel water mist fog jet spray nozzle spray humidifier for use in industrial manufacturing

2,UYS-B Spraying System Working Principle

The spraying system is composed of several UYS-B spray guns, main controller, auxiliary controller, water vapor control, water vapor distribution and so on. The compressed air is discharged from the nozzle through the air pressure regulating valve, and the pneumatic piston in the nozzle is pushed to move the needle valve backward and the water outlet is opened. The jet of compressed air jet at the nozzle outlet produces a vacuum negative pressure at the outlet of the waterway. The negative pressure at the outlet of the nozzle water is piped to the bottom of the diaphragm in the vacuum proportional control valve. The diaphragm drives the stem in the vacuum proportional control valve to move downward and opens the waterway. While compressed air to open the pneumatic switch valve. Water through the pneumatic switch valve, pressure regulator, vacuum proportional control valve, was sucked to the nozzle of the water outlet. In the nozzle at the exit and mixed with compressed air after the formation of water mist.

Low Air Pressure Stainless Steel Vee Jet Fog Spray Nozzles with wide-angle For Agricultural Or Industrial use

high /low pressure stainless steel water mist fog jet spray nozzle spray humidifier for use in industrial manufacturing

3, UYS-B Main Features:

• Large Spray Volume:The maximum humidification capacity of single atomization nozzle is 7L / h, which is suitable for the full humidification of different spaces.
• Fine mist, High efficiency:Average particle size from 5 to10μm, 100% atomization rate.
• High reliability:Nozzle structure using pneumatic needle valve to control water on and off status. No matter the system start or stop, there will be no water dripping phenomenon.
• Automatic-cleaning function:Spray Nozzle with automatic cleaning function, less maintenance work. Even in different conditions of use, can also ensure the perfect function.
• Low operating costs:This system can be applied to different water quality, reduce the maintenance workload, save operating costs.
• Eco-friendly:The compressed air that conveys the mist comes from the compression cycle. The temperature of the bacteria can not survive. Although the water that is not atomized but not absorbed by the air will never be atomized again, the system automatically activates the nozzle emptying cycle at the end of each humidification. The compressed air will thoroughly blow off the parts in contact with the air / water, thus eliminating the conditions for accidental contamination of the microorganisms.
• Long service time: Use the high-quality stainless steel in precision machining for the gun processing to ensure long service life.

4,UYS-B Technical Parameters:

Low Air Pressure Stainless Steel Vee Jet Fog Spray Nozzles with wide-angle For Agricultural Or Industrial use

Ucloud Dry fog humidifier UC-03