Submersible Rexa UNI Wilo Sewage Pump Construction Submersible Anti Corrosion

Product Specification

Wilo - Rexa UNI Construction submersible sewage pump, with electrophoretic coating for anti-corrosion installation, easy to use and convenient to use

For the sewage disposal of small commercially used buildings.

The Wilo-Rexa UNI is suitable as an entry level model for smaller commercial buildings for sewage disposal (according to EN 12050-1). For this purpose, the pump can be used in a wide variety of applications, whether portable or in the pump chamber as a Wilo system solution. The new vortex hydraulics with corrosion-resistant composite and a smooth surface provide high reliability and allow the pump to be used universally with various fluids. Installation is very easy due to the low weight, the capacitor integrated in the single-phase motor and the fixings integrated in the flange. Maintenance is very easy thanks to direct access to the most important components. Due to double gaskets and the large sealing chamber, maintenance intervals can be increased. Wilo-Rexa UNI can be controlled via Wilo-Control switchgears and integrated into existing building management systems. With the Wilo-Rexa UNI, Wilo again proves its innovative leadership and underscores its system expertise by integrating single pumps, pump chambers and controls into higher-level systems.

Your advantages Excellent reliability due to corrosion-free hydraulics for universal application and various fluids Easy installation thanks to its light weight, integrated capacitor at the single-phase motor and flange with integrated fixation Optimum efficiency and operational safety thanks to its vortex hydraulics and smooth surfaces Quick maintenance facilitated by direct access to the sealing chamber and pump housing Long maintenance interval thanks to its double seal and a high volume sealing chamber

Environmentally friendly features Efficient product design with components for the lowest possible weight Efficient product design with components for the lowest possible weight

Design Submersible pump for stationary and portable wet installation in intermittent operation. Liquid For pumping in commercial areas of: Sewage containing faeces Wastewater (with small amounts of sand and gravel) Wastewater, slightly acidic with a pH value > 4.5 The Rexa UNI submersible pumps … B/ and Rexa UNI … K/ are additionally suitable for pumping of: Lake- and seawater NaCl content (common salt): max. 30 g/l up to 20 °C Swimming pool water, max. chloride content: 400 mg/l Wastewater, slightly acidic with a pH value of > 3.5 Sewage pumping according to (DIN) EN 12050 The pumps meet the requirements of EN 12050-1.

Equipment/function Thermal motor monitoring with bimetallic strip Single-phase AC motor with self-switching thermal motor monitoring Single-phase AC motor with integrated capacitor Three-phase AC motor with motor protection plug (version P and A) Attached float switch (version A)

Technical data Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz Immersed operating mode: S1 Non-immersed operating mode: Rexa UNI …: S2-15 min; S3 10% Rexa UNI … B/ …:S2-15 min; S3 10% Rexa UNI … K/ …:S1 Protection class: IP68 Insulation class: F Fluid temperature: 3 … 40 °C (37 … 104 °F) Fluid temperature, max.: 60 °C (140 °F) for 3 min

Construction Rexa UNI V … /M …/P Sewage pump with vortex impeller and horizontal flange connection. Flange connection as a combination flange with integrated fixation and flat gasket. Hydraulics housing and impeller made of copolymer. Surface-cooled 1~ motor with integrated operating capacitor and self-switching thermal motor monitoring. Oil-filled sealing chamber with double sealing. Stainless steel motor housing. Detachable connection cable with fitted shockproof plug.

Rexa UNI V … /M …/A and Rexa UNI V … B/M …/A Sewage pump with vortex impeller and horizontal flange connection. Flange connection as a combination flange with integrated fixation and flat gasket. Hydraulics housing and impeller made of copolymer. Surface-cooled 1~ motor with integrated operating capacitor and self-switching thermal motor monitoring. Oil-filled sealing chamber with double sealing. Stainless steel motor housing. Detachable connection cable with float switch and fitted shockproof plug.

Rexa UNI V … /T …/A Sewage pump with vortex impeller and horizontal flange connection. Flange connection as a combination flange with integrated fixation and flat gasket. Hydraulics housing and impeller made of copolymer. Surface-cooled 3~ motor with thermal motor monitoring. Oil-filled sealing chamber with double sealing. Stainless steel motor housing. Detachable connection cable with CEE plug. Float switch and thermal motor monitoring connected to the CEE plug.

exa UNI V … /T … and Rexa UNI V … B/T … Sewage pump with vortex impeller and horizontal flange connection. Flange connection as a combination flange with integrated fixation and flat gasket. Hydraulics housing and impeller made of copolymer. Surface-cooled 3~ motor with thermal motor monitoring. Oil-filled sealing chamber with double sealing. Stainless steel motor housing. Detachable connection cable with bare cable ends. Rexa UNI V … K/T … Sewage pump with vortex impeller and horizontal flange connection. Flange connection as a combination flange with integrated fixation and flat gasket. Hydraulics housing and impeller made of copolymer. 3~ motor (jacket cooling) with thermal motor monitoring. Oil-filled sealing chamber with double sealing. Motor housing and cooling shroud made of stainless steel. Detachable connection cable with bare cable ends.

Scope of delivery Pump Installation and operating instructions Accessories Connection cable with fixed cable lengths: 1~ motor: up to max. 30 m (98 ft). 3~ motor: up to max. 50 m (164 ft). Suspension unit for wet well installation Level control devices Fixation accessories and chains Switchgear, relays and plugs