SHANGHAI DUBHE ENVIRONMENTAL PROTECTION&TECHNOLOGY CO.,LTD
| Membrane | EPDM |
| Diffuser Body | Acetyl |
| Active Surface Area | 13.8544in2 |
| Hole quantity | 10*5mm |
| Design Flow (Sm³/hr) | 7-10 |
| Application | WWTP/ETP |
| Brand Name | SSI Aeration |
| Model Number | AFC-75-E |
| Certification | ISO |
| Place of Origin | South Korea |
View Detail Information
Explore similar products
WWTP / ETP SSI Coarse Bubble Air Diffuser For Effluent Treatment
Coarse Bubble Diffuser With 10*5mm Hole
Easy Installation and Maintenance with Coarse Bubble Diffuser
EPDM Membrane Coarse Bubble Diffuser For Aeration In Wastewater Treatment
Product Specification
| Membrane | EPDM | Diffuser Body | Acetyl |
| Active Surface Area | 13.8544in2 | Hole quantity | 10*5mm |
| Design Flow (Sm³/hr) | 7-10 | Application | WWTP/ETP |
| Brand Name | SSI Aeration | Model Number | AFC-75-E |
| Certification | ISO | Place of Origin | South Korea |
| High Light | SSI coarse bubble diffuser ，Acetyl Body coarse bubble diffuser ，coarse bubble diffusers wastewater SSI | ||
Caps are most commonly used in aerobic digesters and equalization tanks where high rate oxygen transfer efficiency is not required, They are manufactured from black Acetyl plastic containing UV protection and membranes are made from the same EPDM compound that SSI uses in fine bubble disc diffusers. Caps have a3/4" MNPT thread. SSI's Cap diffuser is a non-clog design and operates well under intermittent and continuous conditions. A typical piping system utilizing SSI AFC75diffusers is made from PVC, CPVC or Stainless Steel pipe, with Grommets, Drilled and Tapped pipe, or welded¾"FNPT SS bosses to the top center line.
SSI manufactures disc diffusers and coarse bubble diffusers, and we mount these products on a wide range of piping materials including PVC, CPVC, PP and Stainless Steel. We have the ability to attach diffusers to pipe using saddles, grommets, or pre-assembled PODS. We can provide retrievable systems or fixed grids, and systems in kit form or mostly factory assembled. We try to understand and anticipate your needs, and fit our recommendations to your situation.
|
Avg Operating Condition per Diffuser 曝气器的工作条件 |
Peak Air Flow per Diffuser曝气器的峰值气流 | Orifice Size孔径 |
Slit Qty 分割数量 |
Active Surface Area per Diffuser 曝气器有效面积 |
Weight per Diffuser ECD215 ECD215曝气器的重量 |
|
0.3-1.5SCFM
|
2.5 SCFM 4.25Sm³/hr | 0.157′′ 4.0 mm | +/-4,155 |
0.30ft² 20.02 ㎡ |
0.81lbs 0.37 kg |
Intelligent Upgrade Options
SSI's patented PTFE membrane barrier properties not only reduce plasticizer extraction, shrinking, and membrane hardening but also limit dynamic changes that can result from swell, such as creep. Compared with uncoated products that are more susceptible to increases in DWP due to more aggressive fouling and changes in physical properties and weight, the PTFE coated membrane improves consistency of DWP (Headloss) values over the product life. This directly impacts long-term power costs and the ability of the system to distribute air uniformly across the tank floor.
| Part Number | Description |
| AFC75E |
AFC75 Coarse Bubble Cap diffuser with EPDM membrane |
| AFC75P |
AFC75 Coarse Bubble Cap diffuser with PTFE membrane |
| AFC75f |
AFC75 Coarse Bubble Cap diffuser with fEPDM membrane |
The Cap diffuser units are furnished completely factory assembled. The only work required by the Contractor is the installation and placement of the diffuser units on the laterals piping.
Diffusers utilize rubber membranes as the air diffusion media. Alternate membrane materials are available for special applications.
SSI recommends care in handling and storage to prevent tearing, puncturing or fouling of the rubber membranes. If units are to be stored before installation, SSI recommends utilizing the original unopened shipping cartons. Store in a clean, cool location that avoids potential mechanical damage
Air distribution through the diffuser is a function of the individual diffuser elevation. For proper system operation, SSI recommends a leveling tolerance of ± 3/8" for the diffuser unit. If the diffusers are mounted with excessive elevation tolerances, the airflow distribution in the system will be adversely impacted.
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2019
Total Annual:
10000000-20000000
Employee Number:
>100
Ecer Certification：
Verified Supplier
Shanghai DUBHE Environmental Protection Technology Co., Ltd. is a leading enterprise in the wastewater treatment market, providing comprehensive solutions and high-quality equipment. Our expertise covers a wide range of products, including various aeration devices (U.S. SSL), blowers, ... Shanghai DUBHE Environmental Protection Technology Co., Ltd. is a leading enterprise in the wastewater treatment market, providing comprehensive solutions and high-quality equipment. Our expertise covers a wide range of products, including various aeration devices (U.S. SSL), blowers, ...
Get in touch with us
Leave a Message, we will call you back quickly!