Product Specification

Moving Bed Biofilm Reactor(MBBR) Biological Filler Bio Carrier For Domestic And Industrial Sewage Treatment-25×10

ARTICLE

Moving bed biofilm reactor (MBBR) is a type of wastewater treatment process that was first invented by Professor Hallvard Ødegaard at the Norwegian University of Science and Technology in the late 1980s.[1] The process takes place in an aeration tank with activated sludge and uses floating, recycled plastic carriers that a biofilm can grow on. The compact size and cheap wastewater treatment costs offer many advantages for the system. The main objective of using MBBR is water reuse and nutrient removal or recovery. In theory, wastewater will be no longer considered waste, it can be considered a resource.

OVERVIEW

Moving bed biofilm technology was developed due to early issues encountered with biofilm reactors, such as hydraulic instability and uneven biofilm distribution.
 
The MBBR system consists of an aeration tank (similar to an activated sludge tank) with special plastic carriers that provide a surface where a biofilm can grow. There is a wide variety of plastic carriers used in these systems. These carriers vary in surface area and in shape, each offering different advantages and disadvantages.
 
The surface area plays a very important role in biofilm formation. Free-floating carriers allow biofilms to form on the surface, therefore a large internal surface area is crucial for contact with water, air, bacteria, and nutrients. The carriers will be mixed in the tank by the aeration system and thus will have good contact between the substrate in the influent wastewater and the biomass on the carriers
 
The most preferable material is currently high-density polyethylene (HDPE) due to its plasticity, density, and durability.

To achieve a higher concentration of biomass in the bioreactors, hybrid MBBR systems have been used where suspended and attached biomass co-exist contributing both to biological processes.

FEATURES

• Large specific surface area, promoting the growth of attached microorganisms.
• Bracket-free design, easy fluidization, and energy-saving operation.
• Fast and easy membrane attachment, leading to high biological activity.
• Strong impact resistance and long operational lifetime.
• Excellent removal of nitrogen and phosphorus compounds.
• Small footprint, simple operation, and flexible management.
• Good hydrophilicity, resulting in effective treatment.
• Reduced sludge production due to reliance on biofilm treatment.

CURRENT USAGE

Today, MBBR technology is used for municipal sewage treatment, industrial wastewater treatment, and decentralized wastewater treatment. This technology has been used in many different industries, some of them being:

• Automotive industry
• Chemical industry
• Food and beverage
• Metal plating and finishing

The MBBR system is considered a biofilm or biological process, not a chemical or mechanical process. Other conventional biofilm processes for wastewater treatment are called trickling filters, rotating biological contactors (RBC), and biological aerated filters (BAF).

APPLICATION

ADVANTAGES

Biofilm processes in general require less space than activated sludge systems because the biomass is more concentrated, and the efficiency of the system is less dependent on the final sludge separation.MBBR systems do not need recycling of the sludge, which is the case with activated sludge systems.

The MBBR system is often installed as a retrofit of existing activated sludge tanks to increase the capacity of the existing system. The degree of filling of carriers can be adapted to the specific situation and the desired capacity. Thus an existing treatment plant can increase its capacity without increasing the footprint by constructing new tanks.

 
Some other advantages are:

• Increased performance and volumetric treatment capacity

• Higher effective sludge retention time (SRT) which is favorable for nitrification

• Responds to load fluctuations without operator intervention

• Lower sludge production

• Less area required

• Resilient to toxic shock

• Process performance independent of secondary clarifier (due to the fact that there is no sludge return line).

SPECIFICATON

Q: What is the lead time of an order?

A:About 7-30 days

Q:Can I have a sample order?

A:No

Q:Can I have a sample order?

A:No

Q: What's the delivery time?

A:About 30 days

Q: Do you have inspection report for material?

A:Yes,we have