Rope Wastewater Filter Media

Product Specification

Rope Biological Packaging

Wastewater Filter Media Braided Packing Fiber Filter Biological Rope Packing

The biological rope packing (rope type biological packing) adopts the mixed weaving method of elastic material and soft material, and the braided packing is made by the serpentine braided weaving method. The circular fiber formed forms a radial structure, increases its surface area, and is suitable for the growth and propagation of a variety of microorganisms, so that the concentration of attached microorganisms can reach more than 150000mg / L; the elastic material and soft material are formed The circular radial structure can increase the porosity of the packing, so that the solid, liquid and gas phases can be well transferred; the circular structure can avoid the excessive peeling of the biofilm due to the impact of water flow. Rope packing

The strength of the center line directly affects the stable operation of the system. With the fixation of the biofilm, the weight of the packing will gradually increase. Under the impact of the water flow, it is easy to break the wire and the center rope, which affects the service life. The rope type biological filler adopts the high elastic wire mixed knitting technology, and a single mixed knitting line can bear 5kg tension. Due to the central rope fixation mode of the rope type biological filler, there are 12 mixed knitting lines in a single section, and the measured biological rope filler can bear 60kg tension

                                     Features                                      

1.  A large number of microorganisms can be fixed to form an ideal environment where they coexist. High treatment effect can be achieved through one-level treatment, which has been proved in many river ecological restoration cases.

2.  The radial structure is composed of numerous circular fibers, which can increase the surface area and adapt to the growth and reproduction of various microorganisms, so that the concentration of attached microorganisms can reach more than 150000mg / L, which is used in the treatment of high concentration ammonia nitrogen wastewater of a large electronic company.

3.  On its surface, ammonia nitrogen can be reduced by the proliferation of aerobic microorganisms, and biological denitrification can be carried out by the proliferation of anaerobic microorganisms inside the biological lace.

4.  The shape is rope shape, so the shape can be changed freely during setting. Biological lace is ring-shaped, which can avoid excessive peeling of biological film due to water impact.

5.  Shaking in the wastewater can not only absorb the dissolved oxygen in the water, but also improve the contact efficiency with the water and the removal rate of organic matters.

6.  Not only in the treatment of low concentration wastewater, but also in the high concentration reaction tank which is easy to be blocked by contact materials.

7.  It can attach a large number of microorganisms, so it can also be used in a small-scale reaction tank.

1. The vertical and horizontal spacing of packing support is 100-200mm;

2. The braided packing is fixed by PE / PP tie directly on the packing bracket. The braided packing does not need to be cut, but can be attached 100-200mm along the bracket and fixed again;

3. There are two ways for the biological rope to be set in the aeration tank: the first is the split flow type, the packing is installed on one side, and the other is aeration; the second is the direct type, the aeration device is directly installed under the biological rope packing, and the water and air are mixed

4. The installation spacing of split type is 100-150 mm, and that of direct type is 150-200 mm.