K2 Bio HDPE Filter Media Balls / Industrial Moving Bed Biological Reactor

Product Specification

HDPE Filter Media K2 Bio Balls Media Mbbr Bio Filter For Sewage Treatment

                                   Product Description                      

Fluidized bed packing, also known as MBBR packing, is a new type of bioactive carrier. It adopts scientific formula, according to different water quality requirements, integrates different kinds of Microelements in polymer materials, which are conducive to the rapid growth of microorganisms. After special process modification and construction, it has the advantages of large specific surface area, good hydrophilicity, good fluidity, high biological activity, easy to hang membrane, good treatment effect, long service life and so on.

Principle of action of fluidized bed packing when sewage passes through the fluidized bed packing reactor, microorganisms in the water continuously adhere to and grow on the inner and outer surfaces of the fluidized bed packing to form a biofilm. The fluid bed packing rotates freely under the agitation of the mixed liquid in the reactor. The biofilm fully contacts and decomposes the pollutants in the water body, so that the water quality can be purified. The turnover of mixed liquid and the movement of carrier are realized by aerobic aeration or anaerobic agitation.

                            Technology Parameter                        

                                      Application                                 

1. The fluidized bed biofilm reactor can be used to remove organic matters and nitrogen. The flow bed biofilm reactor process can be used to remove conventional pollutants, even nitrogen and other nutrients in wastewater. The process has the advantages of simple equipment, flexible operation, saving land occupation, convenient operation, and can be used independently, in series or in parallel. It can be used for the purposes of nitrogen and phosphorus removal, high concentration wastewater removal and sewage treatment The new construction, reconstruction and expansion of the plant can increase the load, improve the treatment effect, reduce the floor area, etc;

2. Combined with the characteristics of biofilm process and activated sludge process in the same treatment unit, the activated sludge process with flotation packing can improve the capacity of BOD / COD removal and the function of phosphorus and nitrogen removal of the existing activated sludge process. This method is suitable for the transformation of the traditional activated sludge method. Without new structures, the function and efficiency of the system can be improved;

3. Front out of stock;

4. Post sell out;

5. Applied to filtration of fish pond or high-purity Aquarium

                                Characteristics                                 

1. With high-quality copolymers, long-term immersion in waste water will not degrade, nor will it have toxic effects on microorganisms.

2. Special structure, the hollow packing structure has three layers of hollow circles inside and outside, each circle has one edge inside and 36 edges outside. It has been successfully researched and developed for many times and adopts one-time forming.

3. With high specific surface area, the specific surface area of ordinary microorganism is 90-180, the specific surface area of hollow filler can reach 600, and the double specific area can reach more than 860. Because of the high specific surface area, the biomass in unit volume is high, and the purpose of short hydraulic retention time can be achieved.

4. High activity of microorganisms. The biofilm growing on the surface of the packing is due to the fluidization collision of the packing. Aeration scour makes the microorganism in the logarithmic growth period with high activity and high treatment efficiency.

5. Hollow packing is floating type, easy to replace and long service life.

6. The ability of denitrification and decomposition of organic matter is strong, so as to achieve the purpose of removing ammonia nitrogen