Black PP Plate Settlers Water Treatment Clarifier Media Honeycomb Packing

Product Specification

Black PP Plate Lamella Clarifier Media Honeycomb Packing For Water Treatment

Honeycomb inclined pipe is a kind of packing for settling tank designed and developed on the basis of "shallow sedimentation" theory. The packing has large wet perimeter, small hydraulic radius, good laminar flow state during operation, no turbulence interference on particle sedimentation, and can accelerate the separation of particles from water and shorten the sedimentation distance of particles.

In addition to water supply purification and chemical plant sewage, domestic sewage plant, coal mine water treatment, coal washing plant water treatment, power plant concentration pool, tailings water treatment, pharmaceutical plant, paper mill wastewater treatment, such as sand removal and rapid sedimentation, oil separation and tailings concentration, the inclined pipe is especially beneficial to the reconstruction of water plant and wastewater treatment project.

                              Ironing method                                  

1.  Site preparation

1. Preparation of hot connection power supply and cable;

2. Prepare 2 electric soldering irons;

3. Operators and supervisors are in place;

4. Large volume will occupy a large space after the completion of pressing and jointing of inclined pipe packing, and the stacking site shall be reserved in advance;

2.  Ironing operation

1. Open the packing of inclined pipe packing, place the first piece of inclined pipe packing flat on the ground, take the second piece of inclined pipe packing on the first piece of packing, check the cut of inclined pipe packing, ensure that the angle is 60 ° and in the form of hexagonal honeycomb, and start to heat the bonding point after checking;

2. All the plane joints at both ends of the hexagon honeycomb shall be hot welded, and the two plane joints on both sides shall be hot welded for more than four points, and the welding for more than four points is required in the middle of the two inclined tube packing planes to ensure the welding is firm;

3. Pay attention to the operation rhythm, control the temperature, and do not miss the number of welding points;

4. Each packing of inclined pipe is used as a separate ironing unit, which shall be stacked orderly on the site after ironing;

5. During the break, the power supply of the electric soldering iron must be cut off and placed safely;

3.  Safety matters

1. Pay attention to the safety of life and prevent scalding and electric shock during the hot joint;

2. Ironing operation requires at least two people to be present, assist each other and cooperate with the operation;

3. Ironing operation is required to be carried out on an open site, and there must be a supervisor during construction;

4. There must be no inflammables on the hot joint site, and there must be fire-fighting facilities on site;

5. In case of any accident, report it in time, and give an alarm in case of emergency.

1. The treatment efficiency is higher than that of the activated sludge process. The general hydraulic load is 100-200m3 / m2 / day, and the organic load is 2000-5000g / m3, so the occupied area is reduced.

2. The aeration intensity is lower than that of the activated sludge method, and there is no need for sludge return, so it can reduce power consumption and simplify management.

3. The amount of sludge is small, which reduces the workload of post-treatment such as sludge dewatering.

4. The sludge produced has good sedimentation, which is conducive to the removal of suspended solids in the later stage.

5. It has strong adaptability, can adapt to a wide range of different water quality, has strong endurance to the impact load of water quality and water quantity mutation, and maintains stable treatment effect.

6. As long as the scientific operation management is carried out and the sewage is flushed regularly, the blockage will not be caused generally.