new second generation 435mpa Waterjet cutting machine direct drive pump increase

WAMIT SECOND-GENERATION DIRECT DRIVE PUMP INTRODUCTION

Performance and parameters

MODEL :WMT SDD II 40

MAX PRESSURE :435MPa

Continuous working pressure :370-380MPa

Max orifice diameter :0.43mm

Flow rate :5.6 l/min

Inlet water pressure :0.4MPa

Motor power :30KW

Dimension :1800mm X 900mm X 1200mm

Booster and piping system (high-pressure cylinder, plunger rod, high-pressure seal, low-pressure seal, high-pressure piping, check valve, etc

Dual-row filtration system (5 Micron, 1 micron, in series)

Fully automatic servo control system, output pressure control mode

Intelligent start-stop function

Automatic shutdown for overpressure and automatic protection for underpressure

Power supply:380VAC, 50Hz , 3 Phase

ADVANTAGE OF WAMIT SECOND-GENERATION DIRECT DRIVE PUMP:

The second-generation WAMIT servo direct-drive pump adopts world most advanced technology and processes . Whether in terms of performance, quality, functionality or operation, there have been significant improvements. The features are summarized as follows::

1,Performance is efficient:The maximum pressure can reach 435MPa, with a continuous working pressure of 370-380MPa and pressure fluctuation range of ±0.5MPa. This continuous and stable high-pressure output increases the cutting speed by 50%-60% compared hydraulic intensifer pumps of the same pressure, significantly enhancing production efficiency.

2,Intelligent maintenance:This product is equipped with a remote control system, which can assist users with remote after-sales service, avoiding losses caused by improper settings.

3,more flow rate:The largest orifice diameter is 0.43mm, with a flow rate of 5.6L/min, allowing customers to achieve higher and quality when making precise cuts.

4,longer using life of easy-wear spare parts:The second-generation direct-drive pump adopts world-leading hard-sealing technology, greatly extending the service life of consumable parts, reducing the frequency of maintenance and lowering the usage cost..

5,Simplified maintenance:Adopting the new integrated assembly process, the maintenance time is reduced by 50%, making maintenance simpler and more convenient.

6,Easy to operate:Equipped with an HD touch screen, the parameters such as pressure, duration, mode, and speed are intuitively displayed, making adjustments simpler and convenient, enhancing the operational experience and work efficiency..

7,Automatic water supply:Equipped with an automatic water supply system, it monitors the water level in real time. If there is no continuous water supply, the system will emit a buzzing alarm; if the water level is too low, it will automatically shut down to avoid equipment damage caused by human error, thus further enhancing the reliability the equipment..

8,Intelligent alarm system :Configure multiple intelligent alarm systems, including servo driver alarm, water supply pressure alarm, maintenance alarm, water level alarm, oil pressure alarm, etc. alarm information will be displayed in real-time on the touch screen to help users quickly identify and resolve issues..

9,Digital platform system:Built-in remote digitalization platform system, users can monitor the operation status of the equipment in real time through mobile and web terminals. The system can statistics the daily operation time, working time, power consumption and income of the equipment, and warn of equipment problems in advance to ensure long-term stable operation of the machine.

10,Energy saving and electricity conservation :The power is only 30kw, compared to the hydraulic intensifier pump with the same flow and pressure (the power of the same hydraulic is 75kw), its energy efficiency is greatly improved. This advantage not only greatly reduces operating costs but also reduces energy consumption, meeting the modern manufacturing industry requirements for energy saving and emission reduction..

11,Environmental protection:It replaces traditional hydraulic systems, reduces the use of hydraulic oil, and is equipped with self-cooling functions, effectively reducing equipment pollution; low noise (noise does not exceed 75dB), the noise level is equivalent to that of ordinary diesel cars, and it is more environmentally friendly

12,Good design appearance:In addition to the rationality of its own structural design, the second-generation direct-drive pump, due to the absence of a hydraulic system, avoids problem of hydraulic oil leakage, eliminating oil pollution and making the equipment appearance cleaner and more tidy..

WAMIT SECOND GENERATION DIRECT DRIVE PUMP CUTTING SPEED SHEET