Vocational Training Equipment Fluids Engineering Training Equipment Pneumatic

Product Specification

ZM9150 Vocational Training Equipment Fluids Engineering Training Equipment Pneumatic Transport
1. Product Overview
1.1 Product Introduction
The pneumatic conveying device can be used to convey the dispersed solids in the pipeline.
The solids are transported to an air flow feed tank through a vibrating tank, and the air flow transports the solids to the pipe, and the transportation in the collection tank is terminated.
Depending on the speed of the air flow and the solids content, different transport conditions may occur. At high speeds, the solids are dispersed in a tube of uniform cross-section (dilute phase transport). If the speed is reduced, the solid particles will slide down due to their higher settling speed. The particles disintegrate again in the air flow and reduce the speed, reducing the settling speed of the individual particles, which eventually leads to blockage and transportation. Through the transparent tube, different transportation states can be observed.
To determine the pressure loss and flow rate, the measurement point is set at the relevant location. The air speed is adjusted by a pressure regulator. The flow of solid particles can be adjusted by the vibration feed controller. Compressed air must be provided from the laboratory.
1.2 Features
The main body of the experimental device is built with high-strength industrial aluminum profiles, and a universal wheel with brake is installed at the bottom to facilitate movement and fixation. The pipeline is made of transparent material, which is convenient for observing the trajectory of solid particles.
1.3 Performance parameters
Vertical tube
Height: 2m
Diameter: 50mm
Feeding barrel volume: 12L
Receiving barrel volume: 38L
Compressed air: minimum 2bar and 60m³ / hour
Power supply: AC220V 10A
1.4 practical training items that can be completed
Operation of pneumatic conveying system
Observation of different transportation states
Measurement of air velocity
2. Experimental content
2.1 Operation experiment of gas delivery system
2.2 Observation experiment of different transportation states
2.3 Measurement of air velocity
2.4 Solid particle feeding speed experiment
 
Product Details and Warranty
We supply suitable spare pats according to experiment requirement, our products take aluminum structure, A4 paper dimension aluminum and plastic hanging box structure.
We supply 3 years warranty time.
 
Packaging & Delivery
Package details: plastic film+ plastic foam + plywood box with pallet, and for equipment dimension less than 1CBM, we supply plastic film+ plastic foam+ fine carton.

Arrange delivery within 45 days upon receipt of payment.

Please see below photo for detailed package.

Training Room Photo

Company Information

We supply professional educational training equipment and technical teaching equipment, which has been widely applied in Engineering Universities, Polytechnics, Technical Institute, Vocational Schools as well as Industry workforce Development Programs and Training Center. Our products allow students to learn and experiment through valuable hands-on experience, and the technology covered by our training equipment provides knowledge, experiments and didactic skills development that are of critical importance to today´s and tomorrow´s careers.

Photo for Clients Visiting Factory

Service

We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.

Certificate
Our products takes ISO9001 product management system.