Labtone Test Equipment Co., Ltd
| Supply Ability | 15 Sets / Month |
| Delivery Time | 30-35 Work Days |
| Packaging Details | International standard wooden case |
| Frequency | 10-60 Hz |
| Displacement | 0-2.6 mmp-p |
| Acceleration range | 0-11g(peak) |
| Max. Payload | 300 kg |
| Vibration Direction | Vertical |
| Power Supply | 3-phase, AC 380V / 50Hz |
| Brand Name | Labtone |
| Model Number | RV8000 |
| Certification | CE |
| Place of Origin | China |
View Detail Information
Explore similar products
Small Mechanical Vibration Shaker Table for Sine Vibration Testing
Small Mechanical Vibration Testing Machine Meets IEC 61960/62133 standard
IEC 60598 Low Frequency Mechanical Impact Test Machine Mechanical Shaker Table
200kg Load Rotary Vibration Test Machine with 1.25G Acceleration Meets ISTA 1A
Product Specification
| Supply Ability | 15 Sets / Month | Delivery Time | 30-35 Work Days |
| Packaging Details | International standard wooden case | Frequency | 10-60 Hz |
| Displacement | 0-2.6 mmp-p | Acceleration range | 0-11g(peak) |
| Max. Payload | 300 kg | Vibration Direction | Vertical |
| Power Supply | 3-phase, AC 380V / 50Hz | Brand Name | Labtone |
| Model Number | RV8000 | Certification | CE |
| Place of Origin | China | ||
| High Light | mechanical vibration testing ，vibration shaker table | ||
Vibraton Test Table, Simple Shaker Machine with PC and Software
Technical Specifications
| Model | RV8000 |
| Table Size(L×W) | 1000 x 800mm |
| Freq. Range(Hz) | 10--60 Hz |
| Disp. (mmp-p) | 0—2.6 p～p |
| Acc. Range | 0--11 G |
| Max. Payload(kg) | 300 kg |
| Wave Form | Sine pulse |
| Vibration Direction | Vertical |
| Power Supply | 3-phase, AC 380V /50Hz |
| Machine Dimension | 1000*800*655mm |
| Machine Weight | 500kg |
Principle Introduction
Mechanical vibration test machine applies to electronic products, components, module, mechanical
and electrical products, instruments and meters and other transportation vibration simulation test. It
meets the standards of GB, UL, IEC vibration test and reliability test.
Our mechanical vibration table has three testing functions, namely vibration test under particular
frequency, frequency sweep test, and multi-stage random test. These three test functions enable
users to perform various tests on their products, such as vibration function test, vibration endurance
test, package transportation test, resonance search, resonance dwell, stress screening and fatigue
test.
Features
1, Using centrifugal excitation method, low mechanical noise.
2, Using synchronous reverse movement, excellent table evenness.
3, Stepless amplitude adjustment, meet different product test requirements.
4, Use-friendly operation control interface.
5, Fixed with shock absorption bags without special foundation.
Precautions
1. Single phase AC 220V ±10%(50Hz) power supply is employed for the vibration tester table.
2. Adjustment of eccentric block: The eccentric blocks for the machine are of the design of four
groups (eight eccentric blocks, 2 blocks form a group). The eccentric blocks on two shafts are in
reverse and synchronous rotation. In order to make the table vibrate evenly without shaking, the
included angles of eccentric blocks must be the same and located at relative position. A group of
eccentric block can be turned to make the direction of opening towards the horizontal left, and the
other group must be in the horizontal right direction.
3. The fastening bolts of eccentric blocks must be fixed properly to avoid slipped thread by force.
4. During the adjustment of eccentric blocks, the machine must be at the stop state, and it is better to
turn off the machine’s power supply (instead of the computer). The front and rear panels of the
eccentric blocks must be fixed before operation.
5. When you hear irregular noise or the machine has severe irregular shaking, it is necessary to shut
down the machine and check the machine immediately or notify the supplier.
6. All bolts on the upper part of the vibration table (above the damping spring) cannot be unfastened
counterclockwise to avoid damage of the machine.
7. The power supplies for the machine and computer shall be turned off when the vibration table is not
in use.
Detailed Picture:
Company Details
Business Type:
Manufacturer
Year Established:
2002
Total Annual:
3 Million-5 Million
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Labtone Test Equipment Co., Ltd. is a +20 year China manufacture of reliable, cost-effective equipments . Our superior products mainly include: Vibration Test Systems, Shock Test Systems, Bump Test Machine, Drop Tester, Transportation Simulators, Combined Environmental Test Chambers. &n... Labtone Test Equipment Co., Ltd. is a +20 year China manufacture of reliable, cost-effective equipments . Our superior products mainly include: Vibration Test Systems, Shock Test Systems, Bump Test Machine, Drop Tester, Transportation Simulators, Combined Environmental Test Chambers. &n...
Get in touch with us
Leave a Message, we will call you back quickly!