Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd
| Payment Terms | T/T,Western Union,Money Gram, Trade Assurance,Paypal etc., |
| Supply Ability | 1000 Sets/Month |
| Delivery Time | 3-7 working days after received your payment |
| Packaging Details | Packed in bubble wrap firstly, and then reinforced with carton for outer packing. |
| Name | Automatic AC Motor Control Fence Barrier Gate Operator For Parking Lots / Garages |
| Humidity | ≤90% |
| Voltage | 220V±10%, 110V±10%, 50/60HZ |
| Rated Power | 85W |
| Protection Grade | IP44 |
| Open/Close Speed | 1.8s, 3s, 6s |
| Brand Name | WONSUN |
| Model Number | DZ-115 |
| Certification | CE, ISO, SGS |
| Place of Origin | China |
View Detail Information
Explore similar products
Dual Movement Two Way Barrier Gate Operator Easy Maintenance 150W
DC Brushless Car Barrier Gate Operator 1.5S - 6S Powder Coating For Parking Lot
100% Heavy Duty AC Motor Security Gate Barriers With 80*45 Fence Arm
Vehicle Access Control Barrier Gate Operator 90 Degree Parking Lot CE Approval
Product Specification
| Payment Terms | T/T,Western Union,Money Gram, Trade Assurance,Paypal etc., | Supply Ability | 1000 Sets/Month |
| Delivery Time | 3-7 working days after received your payment | Packaging Details | Packed in bubble wrap firstly, and then reinforced with carton for outer packing. |
| Name | Automatic AC Motor Control Fence Barrier Gate Operator For Parking Lots / Garages | Humidity | ≤90% |
| Voltage | 220V±10%, 110V±10%, 50/60HZ | Rated Power | 85W |
| Protection Grade | IP44 | Open/Close Speed | 1.8s, 3s, 6s |
| Brand Name | WONSUN | Model Number | DZ-115 |
| Certification | CE, ISO, SGS | Place of Origin | China |
| High Light | Parking Lots Barrier Gate Operator ，Garages Barrier Gate Operator ，AC Motor Barrier Gate Operator | ||
Automatic AC Motor Control Fence Barrier Gate Operator For Parking Lots / Garages
DZ-115 Barrier Gate with Automatic moisture uses the first AC generation motor. It is stable and has long service life performance, running five million times. Its housing is made of galvanized steel with 2mm thickness, and painted, so that the barrier can be used in door and outdoor.
Specification:
Motor Speed and Boom Type:
| Boom type | Boom Length(m) | Opening time(S) | Height between boom and ground(M) |
| Straight boom | 6m≥L＞5m | 6S | H=0.83M |
| 5m≥L＞4.5m | 6S | ||
| 4.5m≥L≥3m | 6S | ||
| Folding boom 90 degree | 5m≥L | 6S | |
| Folding boom 180 degree | 5m≥L | 6S | |
| Fence Boom Two-level | 5m≥L≥4m | 6S | H=0.9M |
| 4m≥L≥3m | 6S | ||
| Fence boom Three-Level | 5m≥L≥4m | 6S | H=1.5M |
| 4m≥L≥3m | 6S |
FAQ:
1. When barrier finish closing, why does the arm open itself slowly?
the spring is too tight, you need release the spring a little, then test it again.
see whether the main crank touch the triangle tightly or not, if tightly, adjust it.
reset the balance position and the electrical limit switch.
2. Why does the controller panel operate with "Di Di Di" abnormal noises?
As for this, it means the resistance on controller board is broken, if you have professional tools to check,
then replace that broken resistance, if not, replace that controller panel.
3. Why does the barrier finish half operation of opening and closing?
If uses our controller panel, you only need to find resistance R37 on controller panel, and repalce it is ok.
4. When barrier closed, why is there a 5 degree angle of inclination?
the model is not good, and the gear doesn't fit each other tightly.
the barrier didn't adjust well, need to reset.
5. When barrier finish open, but it closes itself without any order control, what's the problem?
To check the loop cable first, because the loop cable maybe brokem
To check the motor sensor, if it is not set well, then reset it in the middle between two holes on sensor rod.
6. Why does the arm wave a lot when opening and closing?
The spring is very tight
The Screw touches the rubber absorption tightly, need to reset again.
Contact information:
Sue Zhang
Skype:SueZhang729
Whatsapp:+86 158 7925 9831
Email:sue@wonsunbarrier.com
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2010
Total Annual:
50,000,00-60,000,00
Employee Number:
50~200
Ecer Certification：
Verified Supplier
Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd was founded in 2011, which is a professional manufacture for high-end barrier gate and sliding gate motor, included the product design and development, production, sales and service. We are committed to provide more st... Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd was founded in 2011, which is a professional manufacture for high-end barrier gate and sliding gate motor, included the product design and development, production, sales and service. We are committed to provide more st...
Get in touch with us
Leave a Message, we will call you back quickly!