3000L/H Turbine Oil Purifier Filtration Machine System for Waste Oil Recycling

Product Specification

Vacuum 3000L/H Turbine Oil Purifier Filtration Machine System

Application

TF series turbine oil vacuum filter integrates vacuum drying, separation engineering technology, condensation technology, adsorption technology and precision filtration technology. It can quickly and reliably remove moisture, gas, impurities, colloid, sludge and various pigments from oil under high vacuum conditions. It can also reduce dielectric loss and acid value, improve demulsification degree, and comprehensively improve oil quality. It can realize online operation, can automatically drain water without stopping the machine, so that waste oil can reach the use standard of new oil, and is easy to operate.

Description

The turbine oil vacuum filter uses a multi-stage cartridge filter with strong impurity removal capability. The coarse filter uses a large flow rate washable filter element with high filtration efficiency, which can remove a large amount of impurities in the oil: the precision filter element adopts the "gradually dense" technology, with high filtration accuracy, large dirt holding capacity, high strength, long service life, and can remove fine particles in the oil.

Working principle
When the turbine oil vacuum oil filter works, the polluted oil enters the heater through the inlet under the action of the external atmospheric pressure vacuum suction. The heated oil enters the primary filter, and the large particle impurities are filtered out. Then the oil enters the vacuum separator and passes through the special divergence device. The diverging device produces a huge surface area per unit volume of oil, exposing contaminated oil to a relatively low temperature vacuum, thus removing water and harmful gases in oil. The mixture of evaporated water vapor and gas condenses into liquid through the water tank and cooler, and enters the water storage tank. The remaining gas is drawn out by a vacuum pump. The water removed oil is fed into the fine filter by the discharge pump to remove the particulate impurities, that is, to complete the oil purification process. According to the amount of water content, it takes several cycles to completely remove the water.

Features

1) Adopt coalescence vacuum technology, molecular absorption, vacuum drying, automatic demulsification and other technologies in one, without using any additives demulsification, completely demulsification.

2) unique three-times dehydrating method, not only can separate a lot of water in the oil, but also can remove trace water in the oil, dehydration and emulsification efficiency is high, so that the serious turbid emulsified oil can also become clean transparent.

3) The equipment adopts the stepwise encryption and filtering system setting. The filter can be repeatedly cleaned and used, low cost of consumables, long service life, high-precision filter configuration can effectively remove fine particles and impurities in the oil.

4) The medium condensation device combined with strong wind and water cooling technology is adopted to condense and dehydrate the high temperature and high heat mixed gas extracted, improve the effective output power of the equipment, greatly extend the service life of accessories, and make the equipment more durable;

5) heater with low load design, to ensure the oil heater can evenly heat, can effectively avoid bow | up oil cracking and aging damage;

6) advanced electrical system and automatic infrared oil level control system. Automatic control will not occur oil running phenomenon;

7) It can realize unattended online operation with steam turbine, water turbine and other equipment. Low noise, in line with the world's high standards of environmental protection;

8) The equipment can automatically drain water without stopping, making the operation of the equipment more simple and humanized;

9) If the acid value of oil exceeds the standard, BZ regeneration device can be used together to reduce the acid value and dielectric loss, the acid value after oil treatment (mgKOH/g)≤ S0.03; it can also purify the oil with steam, water leakage, aging, acid, foam and emulsification so that the quality indexes of the oil meet the requirements of "GB/T 7596-2008" Quality Standard for Steam turbine oil in operation ". Online demulsification, dehydration, acid removal, impurity removal, so that the serious turbidified turbine oil becomes clear and transparent.

Edges

• Dehydration (Degas) System

• The vacuum vessel can enlarge evaporation area efficiently. The heater, being placed on the vacuum vessel, becomes an evaporator. Thus the evaporation area of vacuum vessel is three times more than that of the ordinary vacuum vessel. This innovation can dehydrate and degas effectively and efficiently.
• The optimal structure of the dehydration (degas) system enlarges the surface area of oil exposed to the vacuum system and extends the flowing distance of the oil in the vacuum system. Thus there has sufficient time to remove the moisture and gas from the oil by vaporization.

• Filtering System

• The filtering materials with variable apertures are made of specialized glass fiber. The sizes of the filtering fiber and aperture dwindle gradually in the different filtering stages. The impurities with different particulate sizes are filtered step by step. The capability of removing particulate matters and impurities is improved greatly by this method.
• The filtering system has stable and perfect filtering fineness. The filtering fineness has several grades, including 1, 2,3,4,5,6,10 µm etc. Oil β≥1000 after filter.
• The filtering system is equipped with reverse rinse and filth device. It improves the effectiveness of filtering and extends the lifetime of filter awfully.

• Oil heating System

• The unique heater structure heats the oil uniformly.
• Oil Heater System assures less than 1.0 w/cm². During the heating process, the deterioration of the oil caused by overheating is avoided.
• The oil temperature can be adjusted between 20℃ to 80℃.The heater is controlled manually or automatically. The heater will stop automatically when the oil temperature reaches a certain degree.
• Being installed with safety protection devices, the heating system is secure and reliable. The heater will stop operation automatically when the oil volume of inlet is too low to avoid the damages of the heater.

• Electrical Apparatus controlling System

• The main components of the electrical apparatus made by Schneider, Siemens and so on ensure the safety of the controlling system.
• Having several protection systems which will avoid oil ejection, overload and over voltage etc.

• Oil-level Controlling System

• The oil-level floating ball or infrared liquid level automatic controller system are installed in the vacuum vessel to control the oil level so as to avoid the oil being suctioned into vacuum pump in the operation.
• The new innovation of eliminating froth can avoid the oil being suctioned into vacuum pump.

• High quality components

• The main component parts of NSH products such as vacuum pump, oil pump and electric apparatus are from SIEMENS, LEYBOLD, OMRON, SCHNEIDER, HYDAC, NSH, AMICO etc. It ensures NSH products high quality and reliability.

Technical specifications

Another types of our oil purifier machines

TF series oil purifier: Turbine oil purifier system is particularly suitable for purifying turbine lubricating oil. It also applys to treat hydraulic, coolant oil and other lubrication in which contain large of water, vapor, impurities, sludge, dielectric and colloid. It can eliminate them effectively and efficiently.
LV series oil purifier: Lubrication Oil Filter System are suitable especially for purifying and restoring hydraulic oil, machine oil, coolant oil and various other lubrication oil.
GER series oil purifier: Used oil regeneration system is suitable to regenerate used internal-combustion engine oil including diesel engine oil, gasoline engine oil, and used hydraulic oil, other used lubrication oil of machinery.

GED series oil purifier: it is used to recycle all kinds of waste oil into base oil or diesel oil with high quality.

About us:►Sino-NSH Oil Purifier Manufacture Co., Ltd. is a high-tech Company Since 2004 which is engaged in researching, developing and manufacturing lubrication purification equipment. After 18 years' growing, NSH passed the approval of the ISO 9001:2015 quality system, Environmental Management System as per GB/T 24001-201 6/ISO 14001:2015, Chinese high-tech enterprises and another sorts of certifications Issued by Chinese Government, At the same time, we have obtained hundreds of patents for our advanced technology.

NSH regards technical innovation and satisfying service as its philosophy. Taking advantage of Human resources capital and absorbing domestic and foreign advanced purification technology, NSH is committed in making high quality purification equipment and become the main manufacture base of purification machine in China.

Contact:Nico Gao