12000 L/H Transformer Oil Filtration Equipment 380V Vacuum Purifier Plant

Product Specification

12000 L/H Transformer Oil Filtration Equipment 380V Vacuum Purifier Plant

General

NSH VFD series is mainly used to improve the properties of insulation oil. NSH VFD series products are mainly used to improve the performance of insulating oil. It can quickly and effectively remove water, gas, particles and other impurities in the insulating oil, so as to improve the performance of transformers, circuit breakers, transformers, cables, capacitors and other equipment with insulation system. VFD series of professional purification of famous brand oil, high voltage insulation oil, ultra high voltage transformer oil. In addition, it is also suitable for handling low viscosity lubricants.

Operating conditions:

The installation shall be designed to opeartae satifactory at ambient temperatures ranging from -20 deg.C to 55 deg. C

Description

NSH VFD series Vacuum oil filter is a new type of oil purification equipment developed and produced by vacuum drying principle, separation engineering technology, precision filtration technology and adsorption refining technology. It is an ideal equipment for recycling and purifying seriously deteriorated insulating oil and other low viscosity lubricating oil.

It can not only degassing, dehydration, in addition to impurities, but also has the function of removing free carbon in insulating oil, decolorizing, removing acid, reducing dielectric loss and restoring the performance of oil. The water content, gas content, PH value and acid value of the treated oil all meet the national standards.

Edges

• To remove free, soluble water, carbon, free and dissolved gases and particulate matters from insulating oil effectively and rapidly.
• Enhance the value of breakdown voltage greatly.
• Easy handling and maintenance.
• Inject oil into the transformers
• Online work
• Lower maintenance and replacement expenses
• High efficiency and effectiveness
• Small size, light weight, low noise
• Various sizes and configurations (shield) available.

Characteristics

• Efficient degassing dehydration system, using three-dimensional vacuum flash technology, quickly removes water and gas from the oil.
• Precision multistage filtration system, using high quality filter material, large amount of pollution, multistage filtration step by step encryption, high precision filtration.
• The use of special adsorption of fine preparation, effectively removes the free carbon in the oil, water-soluble acid, so that the flash point of oil, acid value, dielectric loss value are up to the standard of use, restore the performance of oil.
• Safe and reliable electric heating system, with fast heating, stable oil temperature, uniform heating and so on.
• The whole machine interlock safety protection system, pressure protection device, oil and heating linkage device and infrared level control system, to avoid the impact of migration on the equipment.
• The treatment of deterioration of insulation oil effect is obvious, can be on-site live processing of various grades of transformer oil.
• The power equipment can be easily fixed, vacuum oil injection.

Main components

      a.Pre-filter:

Utilizes a 50-80mesh strainer to remove any large particles

b. Electric heater:

Oil Heater System assures less than 1.0 w/cm². During the heating process, the deterioration of the oil caused by overheating is avoided. The oil temperature can be adjusted between 20℃ to 80℃.The heater is controlled manually or automatically. The heater will stop automatically when the oil temperature reaches a certain degree. Being installed with safety protection devices, the heating system is secure and reliable. The heater will stop operation automatically when the oil volume of inlet is too low to avoid the damages of the heater.

c. Vacuum chamber:

Utilizes coacervation technology, coalescing technology, separating technology and refined purification technology. To remove free, soluble water, free and dissolved gases. The oil-level floating ball or infrared liquid level automatic controller system are installed in the vacuum vessel to control the oil level so as to avoid the oil being

suctioned into vacuum pump in the operation. The new innovation of eliminating froth can avoid the oil being suctioned into vacuum pump.

d. Oil cooler:

Connected to between vacuum chamber and the roots pump, the vacuum pump to avoid oil entering roots pump and vacuum pump. Secondly, to cool the heated air.

e. Oil discharge pump:

Featuring high suction capabilities removes oil from the processing chamber and discharges the oil through a filter before it is directed either through the discharge port or is re-circulated within the system.

f. Fine filter:

Oil receives its final “polishing” treatment by passing through a high performance element. The filter is rated to capture99.5% of particles greater from 5 to 10 micron absolute.

g. Sampling probe:

Two (2) sampling probes shall be provided, one for the incoming oil and one for the processed oil.

h. Inlet&discharge valves:

Manual valves are provided for the inlet and discharge connection.

i. Manual re-circulation valve:

One manual valve is provided for re-circulation purposes.

j. Transformer dry-out connection:

One transformer dry-out connection.

k. Control panel:

Instrumentation, alarms& interlocks instrumentation&electrical controls are located in NEMA 12 type enclosure. Several pilot lights are provided to indicate operational status(on/off) of key components and alarm conditions.

Technical Specifications:

Another types of our oil purifier machines

TF series oil purifier: Turbine oil purifier system is particularly suitable for purifying turbine lubricating oil. It also applys to treat hydraulic, coolant oil and other lubrication in which contain large of water, vapor, impurities, sludge, dielectric and colloid. It can eliminate them effectively and efficiently.
LV series oil purifier: Lubrication Oil Filter System are suitable especially for purifying and restoring hydraulic oil, machine oil, coolant oil and various other lubrication oil.
GER series oil purifier: Used oil regeneration system is suitable to regenerate used internal-combustion engine oil including diesel engine oil, gasoline engine oil, and used hydraulic oil, other used lubrication oil of machinery.

GED series oil purifier: it is used to recycle all kinds of waste oil into base oil or diesel oil with high quality.

About us:
Sino-NSH is a China based company which engages in researching, developing and manufacturing oil purification systems. It implement products for purification, separation, dehydration and regeneration of industrial lubrication oils in transformer, turbine and other machineries, as well as reclamation all kinds of mineral oils with restoration of color and operational specifications. The products are extensively used in the fields of electric power, petroleum, natural gas, mechanical manufacture, steel, metallurgy, railway, aviation etc. NSH Oil purification equipment series are extensively used in the fields of electric power, petroleum, natural gas, mechanical manufacture, steel, metallurgy, railway, aviation etc. which consume lubrication oil. It s the principal products covering more than 100 kinds of products in 7 series and can meet different needs of customers. For special demands of customers, we offer particular solutions. NSH products are not only able to low customers cost and security risk effectively, but also solve the problem of which the waste oil contaminates environment. Nowadays, the company`s sales network covers all the provinces of China and exports to more than ten countries. NSH products are very popular in domestic market and foreign market based on High quality, advanced technology and excellent service. We think that the development of NSH is derived from talent of human,the survival of NSH is based on products quality, the innovation is the power of NSH s success, the management is the source of NSH s achievement. Our vision is to be a first class company in the world, we will work hard to pursue it step by step.

Contact:

Shirley Liu

Email: sinonsh33@sino-purification.com

Tel/Whatsapp: +8617726298694