DONGGUANG YIJIANG Photoelectricity Technology Co., Ltd
| Supply Ability | 10work days |
| Delivery Time | 15Word days |
| Packaging Details | Wooden box |
| Product name | handheld furniture uvled curing lamp |
| Product molde | YJUV-LED-012 |
| Ultraviolet intensity | 10000mw/cm2 (395nm) |
| Wavelength | 365nm/395nm/405nm |
| Input voltage | AC110-240V AC 50-60HZ |
| Power consumption | 600W |
| Radiation window | 200*20mm |
| Power adjustment | adjustable UV intensity |
| Brand Name | YI JIANG |
| Model Number | YJUV-LED-012 |
| Place of Origin | Made in China |
View Detail Information
Explore similar products
UVLED Point Light Source Is Suitable For UV Glue
UV Curing Machine UV LED Light Chamber Drying Oven LED UV Curing Conveyor
395nm 1750mm Height LED UV Curing Systems For Printing
Low Temperature 1.8KW 1450mm Height UV LED Curing Machine
Product Specification
| Supply Ability | 10work days | Delivery Time | 15Word days |
| Packaging Details | Wooden box | Product name | handheld furniture uvled curing lamp |
| Product molde | YJUV-LED-012 | Ultraviolet intensity | 10000mw/cm2 (395nm) |
| Wavelength | 365nm/395nm/405nm | Input voltage | AC110-240V AC 50-60HZ |
| Power consumption | 600W | Radiation window | 200*20mm |
| Power adjustment | adjustable UV intensity | Brand Name | YI JIANG |
| Model Number | YJUV-LED-012 | Place of Origin | Made in China |
| High Light | 600w light cure machine ，ac110v light cure machine ，10000mw/cm2 uv light curing machine | ||
Blue Light Curing Lamp Handheld LED Curing Machine
Product name: handheld furniture uvled curing lamp
Product molde: YJUV-LED-012
Ultraviolet intensity: 10000mw/cm2 (395nm)
Wavelength: 365nm/395nm/405nm
Input voltage: AC110-240V AC 50-60HZ
Power consumption: 600W
Radiation window: 200*20mm
Power adjustment: adjustable UV intensity
Environmental requirements: -10-50℃
Cooling method: air cooling
Relative humidity: 20%-80%RH
UV machine product repair and maintenance
1. In order to prolong the service life of UVLED equipment and ensure the normal operation of the equipment,
the equipment should be inspected before starting up, and the problems should be corrected in time.
2. Start running continuously for half an hour. Observe whether the indicators and indicators are normal, and
whether there is any abnormal sound during operation. If abnormalities are found, check immediately.
3. Clean the panel at least once a month and check whether the screws of each part are loose.
4. Avoid touching the lamp tube with your hands to prevent sweat and oil from affecting the ultraviolet light
transmission. If it is accidentally contaminated, it can be wiped clean with alcohol cotton.
5. The lamp and reflector should be wiped with alcohol once a month to keep them clean. If the surrounding
environment is bad, increase the number of cleanings accordingly.
6. The exhaust fan should be cleaned every three months to clean the fan blades, the outside of the casing and
the appearance of the motor.
7. Add lubricating oil to each rotating part of the fan, adjust the air valve drive mechanism, tighten each terminal,
and check whether the air valve drive mechanism is flexible and reliable, and whether the wires are damaged.
8. If the small UV curing machine is not used for a long time, it is advisable to loosen the conveyor belt to make
it in a free state.
9. After a period of use, the transmission chain will naturally extend and should be adjusted in time. During the
use of the conveyor belt, due to temperature changes, there may be deviations, and should be adjusted in time.
10. Guarantee the lubrication of the movable parts of the small UVLED curing machine. The active and passive
rollers, bearings, chains and transmission wheels should be greased every six months; other parts and motors
should be greased once a year.
11. After each use of the small uv curing machine, clean up the dirt and dust to ensure that the mesh belt
runs freely.
12. Frequently check whether the plug of the small uv curing machine is in good contact with the socket. For
example, when the price of the small uv curing machine is running normally, if the cable is found to be hot and
hot, we must stop it.
13. The electrical wiring inside the machine must not be changed at will. In the event of a malfunction, check
and repair in time, and non-professional maintenance personnel are not allowed to disassemble or replace
it without authorization.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2016
Total Annual:
6,000,000-11,000,000
Employee Number:
100~120
Ecer Certification：
Active Member
DONGGUANG YIJIANG Photoelectricity Technology Co., Ltd. was established in 2016. The chief engineer and technical backbone of the company have 8-13 years of industry experience, and have made certain achievements in the semiconductor, aerospace, electronics and other industries. The company has... DONGGUANG YIJIANG Photoelectricity Technology Co., Ltd. was established in 2016. The chief engineer and technical backbone of the company have 8-13 years of industry experience, and have made certain achievements in the semiconductor, aerospace, electronics and other industries. The company has...
Get in touch with us
Leave a Message, we will call you back quickly!