ABS Remote Tuya 580m3/H 45w Vehicle Air Purifier

Product Specification

DC motor type UV ionizer car air purifier with remote control and tuya app

KJ510 functions information:

1, About how to take out of the filter screen:

1) remove the cover plate of the filter screen

2) Unlock the filter screen

3) Take it out of the filter bag

4) Install the filter screen

5) Lock the filter screen

2, About setup:

About Settings

In order to give full play to the original performance of this product,please keep the product a proper distance away from the wall and so on when it is in use.(as shown on the below)

Over 120cm away from the ceiling

Over 30cm away from the wall

Over 30cm away from the wall

Over 30cm away from the wall

3, About the dust sensor:

This product is equipped with dust sensor which can detect pollution particles in the air.

When the sensor detects dust in automatic mode,it automatically control the airflow and start to work.

Substances easily to be detected by the dust sensor Indoor dust(dust mile copses and excrement.pollen,fungus bubbles,smoke of cigarettes or joss-sticks,hair of pets

4, About sensor cleaning:

Cleaning method of sensor (clean once about every 3 months)

The sensitivity will decrease when the lens used for detecting air gets dirty by humidity or tobacco tar of cigarette. Please clean following the steps below.

A,open the cover plate of the

B,swap the lens with a dry dust sensor section

5, Filter replace remind:The standard is cleaning once"every 6 months" and replacing"every year'

About the replacement time of the fliter screen

The replacement time may vary according to the method of use and the location where the product is set at. The standard time for replacement is every year.When it is used in places with heavy air pollution, the replacement will be moved up. ※ The catalytic deodorization device can be dismantled when the deodorization effect is weakened. And the deodorization performance can be restored by removing the catalytic deodorization device to a place of good light and ventilation for a certain time(but it is not guaranteed that the deodorizatio performance can be restored to that of a new product.

※ To absorb and purify the harmful gases, the formula activated carbon contained in the filter element may produce smell of slight acidity,which is a normal phenomenon

6, on/off:when press “on/off button,machine will start to work

7, anion:when press”Anion”button,machine will start to release negative ions

8, Child lock:when press this button ,other buttons can not work even if you press them,until you press the “child lock” button again for 5 seconds,other buttons can be pressed

9, Wind speed:3 fan speed

Lowest speed:10w,20 db,200 m3/h cadr

Medium speed:15w,30db,350m3/h cadr

Highest speed:26w,55db,500m3/h cadr

10, wifi is optional:the wifi app is tuya,when you go out home,you also can control the machine by phone through wifi function

11, remote control:you can control the machine within 3 m through remote

The filters purification system:

Primary filter:The primary effect filter has larger dust holding capacity and better use effect. At the same time, it can better intercept the dust in the air, so that the fibers in the dust can adhere to the surface of the primary filter.

Hepa:

A filter that meets the HEPA standard has an effective rate of 99.7% for 0.1 micron and 0.3 micron. The characteristic of the HEPA filter is that air can pass through, but fine particles cannot pass.

Carbon:

Activated carbon is a porous carbonaceous material. Its developed void structure makes it have a large surface area, so it is easy to fully contact with poisonous and harmful gases in the air. The strong adsorption force field around the activated carbon pores will immediately become poisonous. Gas molecules are sucked into the pores, so activated carbon has a strong adsorption capacity and is also the main technology to remove gaseous pollutants. Activated carbon adsorption technology is mainly divided into two categories: physical adsorption and chemical adsorption.

Physical adsorption is mainly aimed at the adsorption of macromolecular organic gases (such as benzene, TVOC) through the microporous structure of activated carbon itself. Chemical adsorption is mainly for some small molecule gaseous pollutants (formaldehyde, hydrogen sulfide, nitrogen oxide, etc.), because the small molecule gas is easily separated again to form secondary pollution after being adsorbed, so the activated carbon must be chemically treated to make it The adsorbed gas reacts with the chemical components to achieve the adsorption effect.

Why we choose HUIMEI brand air purifier?

• More than 20 type air purifier to meet your different request(wall mounted,portable type,home type and commercial type)
• More than 7 years to produce air purifier
• There is more than 10 engineers in R&D team to create new models every year
• ODM is welcome
• Strict quality control:3 times check machine quality before shipment

Our company informations:

founded in 2015,and only produce air purifier with 3 product line,located in Zhongshan city,guangdong,China,we have a cadr test lab and with a enginner team which have more thann 10 engineers to develop new models every year,from the product line,we will have 3 time quality check before pack the machines

Our Advantages:
1. We provide 1 year warranty
2. Replace the broken parts freely when next order
3. Shipping Tracking Service
4. OEM program, brand your product and packaging, be the hot seller in your area..
5. If you have any questions or need help, please let us know at any time, we will try our best to provide services.
6. The goods will be packing well by our profession packing worker.

How to process with us?
1) send enquiry to us by email or by phone
2) after received enquiry,we will send you product details by email
3) if you found some modesl ok for you ,pls ask us for more details(video or photo)
4) we could provide sample within 7 days if needed
5) before large order,we will send you one sample to let your comfirm

Certifications:
CE/ROHS/ERP,other cetifications can be discussed if needed

FAQ:
1. How can we get sample to test quality before placing larger order?
normally 7 days can provide you sample,you arrange the shipping cost and sample cost first,after place bulk order,we will return you sample cost
2. Can we do printing or label printing on the machines ?
Yes, we can.
3. Can you do ODM?
Yes, We can ,you provide the drawing to us,we will caculate the mold cost for you
4. What is the normal lead time?
For stock cup, we will send goods to you within 1-3 days after receiving your payment.
For OEM order,15~20 days is needed after received payment
5. What is your shipping terms?
For small trial order,FEDEX, DHL, UPS, TNT etc can be provided.
For larger order,we can arrange shipment by sea,by air according to your requirement.
We will help you to choose the best efficient shipping way according to your detail requirements.