Sinotruk Howo 6x4 Tractor Truck 336hp 371hp Used Tractor Trucks

Product Specification

      Sinotruk Howo 6x4 Tractor Truck, 336hp 371hp Used Tractor Trucks

Descriptions

Maintenance of Used Howo Trucks

The safety and maintenance of used howo trucks is very important. It can not only ensure the safety of drivers, but also prolong the service life of used trucks. Here are some suggestions for safe driving and maintenance of trucks.

Engine--The most important part for truck maintenance

Operation Attentions and Maintenance

For driving safety, the engine must be carried out routine inspections of each component. If somewhere is abnormal, the vehicle should be sent to the repairing service station for maintenance.

Before running the diesel engine, the height of cooling level, fuel and oil level, and diesel level will be checked.

When the diesel engine is started, if it doesn’t work within 15 seconds, restart it after 2 minutes.

After diesel engine is started, idle speed running will last for 2-3 minutes. Fuel pressure will exceed 100.000Pa. When cooling water temperature is lower than 600C, do not run the engine at high-speed and heavy load at once, otherwise its wear resistance and reliability will be affected.

In the case that the engine working with load, load and speed must be reduced before shutdown. Idle speed running must last for no less than 5 minutes.

During running-in period (within 3000km), it is suitable for diesel engine to run only under medium load.

Routine Inspection and Maintenance

Oil Level Check

Check must be carried out after engine shuts down for 5 minutes with the vehicle parked on level ground. When the engine is running or the vehicle is tilting, the oil level could not be measured accuratly.

Checking Methods

• Pull out the oil rule, clean the oil.
• Re-insert the oil guage completely, and then pull it out again, check the oil level. If the oil level in the grid within the region, it indicates that it is normal.
• If it lacks of the oil, pls fill oil. When refueling, do not exceed the “maximum” of oil gauge.
• After using, re-insert the oil gauge correctly. Do not let the oil spill all around during refueling. Prevent the oil spills on other components of the engine to avoid danger.

Coolant Level

Check whether the coolant water level is adequate or not.

Check the coolant level and add the coolant after the engine is cool.

The reason of sudden dropping in coolant level may be the leak of cooling system, please go to service station for maintenance.

Engine Status

Start the engine and check whether the exhaust gas, shaking and starting is normal, and check if there is abnormal noise when the engine is at idle speed. If abnormal starting .black smoke, abnormal shaking or noise, please go to service station for maintenance.

Fuel Oil, Lubricating Oil, Coolant and Auxiliary Materials Used in Engine:

Fuel Oil

Summer: diesel which apply to the local market in summer.

Winter: diesel which apply to the local market in winter.

Lubricating Oil

Grade CF-4 15W/40 engine oil is recommended.

High-grade oil is allowed to replace lower-grade oil.

Before starting the engine, check the height of the oil within the oil pan.

Warning:

1. Do not check the height of lubricating oil level when the engine is running.

2. It is not allowed to mix-use the different grade oils.

As the multi-grade oil with a flat viscosity curve, between the range of lubricating low temperature and high temperature, it has good lubricating characteristic, so we recommend use multi-level lubricant.

Changing Engine Oil:

Check whether the oil color is normal and extraneous matter is mixed in oil or not when discharging the oil, so as to detect hidden errors. After the oil is to be drained completely, clean the drain plug and then tighten it; replace with new oil filter element, the new oil should be added into the engine to the upper limit of oil ruler. In order to prevent the case that starting the engine without lubrication, turn the key switch to the starting position when the high-pressure oil pump is in the off position, empty running for a while, and then start the engine and operate in low speed. Check oil filter if there is any leaks, shut down five minutes later, check and add oil to the upper limit.

Notice:Do not replace the engine oil when it is hot.

Grease

Inject the general lithium grease into the oil cup of water pump in line with the requirements of the local market.

Coolant

Cooling system should be added with the long-acting cooling fluid, this fluid has capability of antifreeze rust. Please refer to the ratio of long-acting coolant antifreeze instructions.

Brand Applicable Min. Temperature °C

JFL-318 -10

JFL-336 -26

JFL-345 -35

Warning:

1. When temperature is below 0°C, you should check the antifreeze concentration regularly.

2. Vehicles perennial running at areas above 0°C, water which has been treated with anti-rust and anti-scaling could be used as the coolant; it is prohibited using untreated water as the engine coolant.

USED HOWO TRUCKS SPECIFICATIONS

Second Hand Howo Tractor Head Details

Shipping Method
Flat Rack Container

Bulk Ship

Ro-Ro Ship

Our Refurbishment Workshop:

Export Record

22 units howo tractor truck to Tanzania, Simba Logistics Company 

2 units used howo A7 tractor to Philippines

30 units howo tractor truck to Mali, Toguna Motors Company