Hangzhou Powersonic Equipment Co., Ltd.
| Payment Terms | T/T, Western Union |
| Supply Ability | 200PCS/MONTH |
| Delivery Time | 5DAYS |
| Packaging Details | CARTON |
| Material | Titanium alloy |
| Frequency | 20Khz |
| Dimension | 330*20mm |
| connect screw | 1/2-20unf |
| Brand Name | Rps-sonic |
| Model Number | Rps-H330 |
| Certification | CE |
| Place of Origin | China |
View Detail Information
Explore similar products
Low Density Titanium Welding Horn High Specific Strength TC4
Thermoplastic Materials Ultrasonic Welding Horn High Frequency Vibrations
Aluminum Ultrasonic Welding Horn Guidelines Ultrasonic Air Horn
High Hardness Ultrasonic Welding Probe Good Wear Resistance M8 Connect Screw
Product Specification
| Payment Terms | T/T, Western Union | Supply Ability | 200PCS/MONTH |
| Delivery Time | 5DAYS | Packaging Details | CARTON |
| Material | Titanium alloy | Frequency | 20Khz |
| Dimension | 330*20mm | connect screw | 1/2-20unf |
| Brand Name | Rps-sonic | Model Number | Rps-H330 |
| Certification | CE | Place of Origin | China |
| High Light | ultrasonic transducer horn ，ultrasonic cutting horn | ||
Titanium alloy welding horn is mainly used for ultrasonic precision plastic welding and food cutting. This material is used for continuous vibration machines, with high toughness, thermal conductivity and long service life.
Ten characteristics of titanium
1. Low density and high specific strength
2. Good corrosion resistance
3. Good low temperature resistance
4. Good heat resistance
5. Good damping resistance
6. Non-magnetic and non-toxic
7. Low thermal conductivity
8 .Low modulus of elasticity
9. Good suction performance
10. Tensile strength is close to its yield strength
Ultrasonic welding jig, welding horn and machine debugging
1 Completely release the “air pressure” in the machine (turn the knob to “0”), so as to perform the progressive positioning of Horn and Nest.
2 Select the appropriate Booster (Gold / Silver / Black) according to the characteristics of the product, and then screw it and Horn into the groove above the machine. (The cover panel is to be screwed on)
3 Temporarily fix the Nest to the base with fixing blocks and screws, so that it can be adjusted manually.
4 Place the part to be welded in Nest, and pull down Horn to see if its contact surface can completely fit the part welding surface? (If not, you can position by rotating the azimuth angle of Horn and adjusting the Nest position)
5 After the positioning is completed, fully tighten the cover panel / fixing block and screws.At this point, you can start the setting and operation of the welding conditions of the machine itself.
Parameter:
Please check our horn dimension as follows:
| 15k rectangle horn | Steel | Aluminum alloy | Titanium alloy | |||
| Length(mm) | width(mm) | length(mm) | width(mm) | length(mm) | width(mm) | |
| 90 | 12-30 | 70 | 12-30 | 70 | 20-30 | |
| 120 | 12-30 | 80 | 12-30 | 90 | 20-30 | |
| 155 | 12-30 | 90 | 12-30 | 155 | 20-30 | |
| 210 | 20-30 | 120 | 15-30 | 180 | 20-30 | |
| 270 | 20-30 | 160 | 15-30 | 210 | 20-30 | |
| 320 | 20-30 | 210 | 15-30 | 270 | 20-30 | |
|
|
| 270 | 15-30 |
|
| |
|
|
| 320 | 15-30 |
|
| |
|
|
| 350 | 15-30 |
|
| |
| 15k Circle horn | Steel | Aluminum alloy | Titanium alloy | |||
| diameter | diameter | diameter | ||||
| 30 | 30 | 30 | ||||
| 50 | 50 | 50 | ||||
| 65 | 65 | 65 | ||||
| 75 | 75 |
| ||||
| 85 | 85 |
| ||||
| 90 | 90 |
| ||||
| 20k rectangle horn | Steel | Aluminum alloy | Titanium alloy | |||
| Length(mm) | width(mm) | length(mm) | width(mm) | length(mm) | width(mm) | |
| 50 | 15-25 | 50 | 10-25 | 90 | 10-25 | |
| 60 | 15-25 | 55 | 10-25 | 95 | 10-25 | |
| 65 | 15-25 | 60 | 10-25 | 100 | 10-25 | |
| 70 | 15-25 | 70 | 10-25 | 115 | 10-25 | |
| 90 | 15-25 | 90 | 10-25 | 120 | 10-25 | |
| 95 | 15-25 | 95 | 10-25 | 140 | 10-25 | |
| 115 | 15-25 | 115 | 15-25 | 160 | 10-25 | |
| 155 | 15-25 | 175 | 15-25 | 175 | 10-25 | |
| 175 | 15-25 | 200 | 15-25 | 200 | 10-25 | |
| 200 | 15-25 | 210 | 15-25 | 210 | 10-25 | |
| 210 | 15-25 | 270 | 15-25 | 270 | 10-25 | |
| 270 | 15-25 | 300 | 15-25 | 300 | 10-25 | |
| 20k circle horn | steel | Aluminum alloy | Titanium alloy | |||
| diameter | diameter | diameter | ||||
| 30 | 20 | 20 | ||||
| 35 | 35 | 35 | ||||
| 40 | 40 | 40 | ||||
| 45 | 45 | 45 | ||||
| 50 | 50 | 50 | ||||
| 54 | 54 | 54 | ||||
| 65 | 65 | 65 | ||||
|
| 75 | |||||
Why RPS-SONIC HORN:
1. Every horn will be designed by FEA system , so that to confirm the End face of the ultrasonic horn with uniform force
2. All ultrasonic horns with three months warranty.
3. Specialized in high power ultrasonic for more than ten years
4. Every ultrasonic horn with 24hours old testing before shipment.
5. Good packing, no packing problem during the 10 years exporting business.
6. Every customer will get purchase records and there are certain rewards after accumulation
Service and shipment
Company Details
Business Type:
Manufacturer
Year Established:
2009
Total Annual:
300-500
Employee Number:
50~100
Ecer Certification：
Verified Supplier
R-Responsibility P-Products S-Service sale the right products instead of the expensive one Rps-sonic, consisted with a couple of young people who love ultrasonic very much.The founding members of RPS-SONIC have an average degree of Bachelor's degree or above. They have been in the ultrason... R-Responsibility P-Products S-Service sale the right products instead of the expensive one Rps-sonic, consisted with a couple of young people who love ultrasonic very much.The founding members of RPS-SONIC have an average degree of Bachelor's degree or above. They have been in the ultrason...
Get in touch with us
Leave a Message, we will call you back quickly!