Engineering Processes Industrial Ultrasound Equipment , 3600W Ultrasonic

Product Specification

Engineering Processes Industrial Ultrasound Equipment , 3600W Ultrasonic Cleaning Tank

Automotive Ultrasonic Cleaners

For small autoparts such as plugs, screws, bolts, hex and fixtures, SS ball bearings and components with less than 100 mm length, we suggest a small ultrasonic autoparts cleaner which has a capacity of 4-5 Liters of water and can clean upto a kg of material within 3-30 minutes depending upon the component type and contamination load.

Small Ultrasonic Cleaner is usually meant for maintainence purpose rather than production purpose. It is also largely used by 3 tier OEMs for auto parts cleaning, by restoration companies, r&d labs in auto components and many other places

Automotive Ultrasonic Cleaners is primarily an aqueous tank systemthat uses ultrasonic energy to remove dirt, grease, oiland baked-on carbon from parts. Contaminants such aspaint, rust, glued-on gaskets, and heavy layers of bake don carbon can also be removed by ultrasonic cleaning but require more aggressive chemistries. Unlike someother cleaning processes, ultrasonic cleaning will notdamage intricate, lightweight, or easily damaged parts.

Ultrasonic cleaning equipment for use in Engineering processes

AGSONIC ultrasonic cleaning technology is highly effective, removing contaminants from surface areas inaccessible to spray washing or manual cleaning.

Ultrasonic cleaning technology reaches the most inaccessible surface areas of complex aerospace components used in manufacturing, overhaul, servicing and maintenance stages. Ultrawave’s ultrasonic equipment provides a much faster and higher quality cleaning results than spray washing and manual scrubbing. It is a more environmentally friendly alternative to solvent cleaning.

All Ultrawave’s ultrasonic baths are supplied complete with lid and basket

Welcome to Aerospace And Aircraft Parts cleaning - Aerospace And Aircraft Parts Cleaning, Truck Engine Parts Cleaning, Motor Bike Engine Parts Cleaning.

Our Ultrasonic cleaning process, can effectively clean the following components- Aerospace And Aircraft Parts ,Aluminum castings, engine blocks, Carburetors, Cylinder Heads, Engines, Engine Components, Gear Boxes, Filters, Tubes and Valves.

AG Aerospace And Aircraft Parts ultrasonic cleaning machine are revolutionizing cleaning methods and processes on the Aerospace , our Aerospace And Aircraft Parts ultrasonic cleaning machine can clean all kinds of automotive, aircraft, and marine engine parts, ultrasonic technology for cleaning parts eliminates manual labor while providing you with superior cleaning action, most parts can be cleaned with environmentally friendly water-based solutions

Ultrasonic cleaning machines work on the principle of agitating cleaning solvents using high frequency sound waves, the ultrasonic agitation creates millions of microscopic bubbles that implode releasing vast quantities of energy, this action, know as cavitations, dislodges any contaminant stuck to the surface of a part, ultrasonic cavitations thoroughly cleans every surface in contact with the cleaning fluid

Model:

ultrasonic tank models for your choice:

How the System Operates:

The system operates in the following manner:

• Parts are placed into the tank using the included stainless steel basket or other holding fixture.
• Once submerged, the START button is pressed, and the cover is closed. The ultrasonic system turns on, and the filter system turns off automatically. Parts are cleaned with the CROSSFIRE ultrasonic system at this time.
• The system will automatically turn off upon completion of the cycle.
• Operators can then return when the parts are clean.
• The cover is opened and the batch of parts is placed onto the basket rest. Dripping liquids are directed back to the ultrasonic cleaning tank
• 
•