Lanry Instruments (Shanghai) Co., Ltd.
| Supply Ability | 50pcs/day |
| Packaging Details | Carton package |
| Product Name | Water ultrasonic Flow Meter TF1100-EC |
| Output | 4-20mA /Modbus |
| High Temp | -35-200 °C |
| Application | Measuring Fluid |
| Temperauture Input Sensor | Clamp on PT1000 |
| Single gross weight | 7.0 kg |
| Place of Origin | Shanghai, China (Mainland) |
| Brand Name | Lanry |
| Model Number | TF1100-EC |
| Certification | CE CPA |
View Detail Information
Explore similar products
Clamp On Transit-time Ultrasonic Flow meter for water measure
Wall Mounted Transit Time Flow Meter Strong Adaptive Ability For Full Pipe
Portable Clamp On Ultrasonic Flow Meter TF1100-EC Low Power Consumption
Transit Time Ultrasonic Flow Rate Sensor Clamp On Type Fiberglass Housing
Product Specification
| Supply Ability | 50pcs/day | Packaging Details | Carton package |
| Product Name | Water ultrasonic Flow Meter TF1100-EC | Output | 4-20mA /Modbus |
| High Temp | -35-200 °C | Application | Measuring Fluid |
| Temperauture Input Sensor | Clamp on PT1000 | Single gross weight | 7.0 kg |
| Place of Origin | Shanghai, China (Mainland) | Brand Name | Lanry |
| Model Number | TF1100-EC | Certification | CE CPA |
| High Light | clamp on type ultrasonic flow meter ，ultrasonic fuel flow meter | ||
The Professional Fuel Oil Water ultrasonic Flow Meter modbus output TF1100-EC
Fuel Oil Water ultrasonic Flow Meter works on the transit-time principle. The clamp-on ultrasonic sensors are mounted on the external surface of the pipe for non-invasive and non-intrusive flow measurement of liquid and liquefied gasses in fully filled pipe. Three pairs of transducers are sufficient to cover the most common pipe diameter ranges. In addition, its optional thermal energy measurement capability makes it possible to carry out a complete analysis of thermal energy usage in any facility.
This flexible and easy to use flow meter is the ideal tool for the support of service and maintenance activities. It can also be used for the control or even for the temporary replacement of permanently installed meters.
6. Wide bi-directional flow range of 0.01 m/s to 12 m/s..
General
1. Support of commissioning process and installation
2. Energy efficiency audits
3. Service and maintenance
4. Replacement of defective devices
5. Performance and efficiency measurement
- Evaluation and assessments
- Capacity measurement of pumps
- Monitoring of regulating valves
Water and waste water industry - hot water, cooling water, potable water, sea water etc.)
Petrochemical industry
Food , beverage and pharmaceutical industry
Refrigeration and air conditioning systems
Power supply
Metallurgy and mining applications
Specifications: Transmitter
| Measurement principle | Ultrasonic transit-time difference correlation principle |
| Flow velocity range | 0.01 to 12 m/s, bi-directional |
| Resolution | 0.25mm/s |
| Repeatability | 0.2% of reading |
| Accuracy | ±1.0% of reading at rates >0.3 m/s);±0.003 m/s of reading at rates<0.3 m/s |
| Response time | 0.5s |
| Sensitivity | 0.003m/s |
| Damping of displayed value | 0-99s(selectable by user) |
| Liquid Types Supported | both clean and somewhat dirty liquids with turbidity <10000 ppm |
| Power Supply | AC: 85-265V DC: 24V/500mA |
| Enclosure type | Wall-mounted |
| Degree of protection | IP66 according to EN60529 |
| Operating temperature | -10℃ to +60℃ |
| Housing material | Fiberglass |
| Display | 4 line×16 English letters LCD graphic display, backlit |
| Units | User Configured (English and Metric) |
| Rate | Rate and Velocity Display |
| Totalized | gallons, ft³, barrels, lbs, liters, m³,kg |
| Thermal energy | unit GJ,KWh can be optional |
| Communication | 4~20mA(accuracy 0.1%),OCT, Relay, RS232, RS485 (Modbus),data logger |
| Security | Keypad lockout, system lockout |
| Size | 244*196*114mm |
| Weight | 2.4kg |
Specifications: Transducer
| Degree of protection | IP65 according to EN60529.(IP67 or IP68 Upon request) |
| Suited Liquid Temperature | Std. Temp.: -35℃~85℃ for short periods up to 120℃ |
| High Temp.: -35℃~200℃ for short periods up to 250℃ | |
| Pipe diameter range | 20-50mm for type S, 40-1000mm for type M, 1000-6000mm for type L |
| Transducer Size | Type S 48(h)*28(w)*28(d)mm |
| Type M 60(h)*34(w)*32(d)mm | |
| Type L 80(h)*40(w)*42(d)mm | |
| Material of transducer | Aluminum for standard temp. sensor, and peek for high temp. sensor |
| Cable Length | Std:10m |
| Temperature Sensor | Pt1000, 0 to 200℃, Clamp-on and Insertion type Accuracy: ±0.1% |
With years of export experience along with excellent quality, advanced services and competitive prices, Lanry has won numerous customers' trust and support.With years of export experience along with excellent quality, advanced services and competitive prices, Lanry has won numerous customers' trust and support.
Delivery
Standard meter: 3-7 days
Special meter: pls contact us
Express, by air, by sea can be optional.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2003
Total Annual:
3000000-8000000
Employee Number:
50~100
Ecer Certification：
Site Member
Lanry Instruments, is the professional manufacturer of flow measure instruments, provides one package service of research and development, production, marking and after-sales servica. Engaged in the production of flow meters more than 20 years, Lanry has been equipped with advanced design capabiliti... Lanry Instruments, is the professional manufacturer of flow measure instruments, provides one package service of research and development, production, marking and after-sales servica. Engaged in the production of flow meters more than 20 years, Lanry has been equipped with advanced design capabiliti...
Get in touch with us
Leave a Message, we will call you back quickly!