Guangdong Uchi Electronics Co.,Ltd
| Payment Terms | Western Union, MoneyGram, T/T |
| Supply Ability | 10000000 |
| Packaging Details | box( L350*W350*H170) |
| Core | BP95TG50*0.3 Without a round hole |
| Wire | 0.08*105P*10.5TS |
| Sn | sn99.3% |
| Cu | 0.7% |
| Temp | 25degree |
| Humidity | 70% |
| Brand Name | uchi |
| Model Number | PCW-50R21-A1109803 |
| Certification | UL ROH |
| Place of Origin | Made in Dongguan |
View Detail Information
Explore similar products
Low Power Loss High Efficiency Schottky Diode For High Frequency Switch Power
Common Cathode Structure Schottky Diode For Polarity Protection Applications
High Current Resistance Schottky Diode For High Frequency Switch Power Supply
RoHS Approved Schottky Diode Guard Ring For Overvoltage Protection
Product Specification
| Payment Terms | Western Union, MoneyGram, T/T | Supply Ability | 10000000 |
| Packaging Details | box( L350*W350*H170) | Core | BP95TG50*0.3 Without a round hole |
| Wire | 0.08*105P*10.5TS | Sn | sn99.3% |
| Cu | 0.7% | Temp | 25degree |
| Humidity | 70% | Brand Name | uchi |
| Model Number | PCW-50R21-A1109803 | Certification | UL ROH |
| Place of Origin | Made in Dongguan | ||
| High Light | wireless charging receiver coil ，wireless charging transmitter coil | ||
Notching L wireless charging coils assembly PCW-50R21-A1109803 for smart tv or phone charger and notebook
1.DIMENSIONS(MM)
| A(mm) | 49.0+/-1.0 |
| B (mm) | 43.5+/-1.0 |
| C(mm) | 20.5+/-0.5 |
| D(mm) | 40+/-3.0 |
| E(mm) | 6.0Ref |
| F(mm) | 3.0+/-1.5 |
| G(mm) | 2.1Max |
2.MATERIAL:
a. CORE:BP95TG50*0.3 Without a round hole
b.WIRE:∮0.08*105P*10.5TS
c.Sn:Sn99.3% Cu:0.7%
d.doulb faced adhesive tape:.&43*43MM 9448A 3M
&40*22MM 9448A*3M
e.tape maroon mylar tape (5.0mm width)
3.ELECTRICAL DIAGRAM:
4. ELECTRICAL CHAR ACTERISTIC:
| ITEM | SPEC | TEST EQUIPMENT | TEST CONDITION |
| L | 6.3uH+10% | WK5237 OR EQU | 100KHz/1.0V |
| DCR | 50(mΩ)MAX | 502BC | |
| Q Value) | 60 Min | WK5237 OR EQU | 100KHz/1.0 |
5.SPECIFICATION NO:
| PCW 50R21 A1109803 K |
6.TEST DATA:
| ITEM | L(μH) | DCR(mΩ) | Q | |
| SPEC | 6.3+/-10% | 50MAX | 60 Min | |
| 1 | 6.29 | 37.7 | 80 | |
| 2 | 6.31 | 37.9 | 87 | |
| 3 | 6.28 | 37.6 | 82 | |
| 4 | 6.30 | 37.8 | 85 | |
| 5 | 6.31 | 37.5 | 86 | |
| 6 | ||||
| 7 | ||||
| 8 | ||||
| 9 | ||||
| 10 | ||||
|
X | 6.298 | 37.7 | 84 | |
| R | 0.03 | 0.4 | 5 |
7.PACKAGING
a.quantity
b.packaing dimensions(mm)
| L | W | H |
| 350MAX | 350MAX | 170MAX |
8.RELIABILITY TEST
| .1.STORAGE TEMPERATURE:
| -40℃～85℃ |
| .2.OPERATING TEMPERATURE RANGE :
| -40℃～+85℃(CONTAIN HEATING COIL) -40℃～+85℃ |
| 3.EXTERNAL APPEARANCE :
| NO EXTERNAL DEFECTS CAN BE FOUND IN THE VISUAL INSPECTION. |
| 4. TERMINAL STRENGTH : | FIXED INDUCTORS,ONE END OF THE ELECTRODE WITH 0.45KG PULLING FORCE,GUIDED THE NEEDLE DOES NOT FALL OFF.
|
| 5.INSULATING RESISTANCE :
| THE INSULATION RESISTANCE SHOULD BE OVER 1000MΩ WHEN D.C.100V IS APPLIED TO THE WINDING –CORE. MEANWHILE NO STRUCTURE AND ELECTRIC DEFECTS SHOULD BE FOUND FOR 1 MINUTE.
|
| 6. HUMIDITY TEST :
| INDUCTANCE DEVIATION IS WITHIN ±10.0% AND NO STRUCTURE AND ELECTRIC DEFECTS CAN BE FOUND AFTER 96±2hours TEST UNDER THE CONDITIONOF RELATIVE HUMIDITY OF 90～95% AND TEMPERATURE OF 40±5℃. AND 1 HOUR STORAGE UNDER ROOM AMBIENT CONDITIONS AFTER THE DEVICE IS WIPED WITH DRY CLOTH.
|
| 7. VIBRATION TEST :
| INDUCTANCE DEVIATION IS WITHIN ±10.0％ AFTER 1 HOUR SWEEPING VIBRATION IN EACH THREE DIRECTIONS. NAMELY, FREQUENCY IS10～55Hz ANDTHE AMPLITUDE OF 1MINUTE CYCLE IS 1.5mm .
|
9.Background
Inductive Coupling: good coupling between two coils, a transmitter coil and a receiver coil. An alternating current in the transmitter coil generates a magnetic field which induces a voltage in the receiver coil. This voltage can be used to power a mobile device or charge a battery. It is ideal for wireless charging transmitter coil assembly and increase the charging efficiency.
10.Features
Wireless charging transmitter coil assembly (Tx - coil)
Litz wire winding Shield by Ni-Zn ferrite material
Compliance with Qi standard of WPC
11.Applications
Mobile Phones
Battery or battery Chargers
Cameras
MP3 /PMP
MID's
Hand Held Devices
Gaming devices
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2006
Total Annual:
1,500,000-2,500,000
Employee Number:
138~168
Ecer Certification：
Verified Supplier
Uchi was established in 2006 in Dongguan, China. After years of development, Uchi has become a large scale hi-tech enterprise that specialized in development and production of complete series of MOV,PTC, NTC series, PPTC series, Fuse(ALL TYPE),Resistor、integrated circuit 、 Capacitor, ... Uchi was established in 2006 in Dongguan, China. After years of development, Uchi has become a large scale hi-tech enterprise that specialized in development and production of complete series of MOV,PTC, NTC series, PPTC series, Fuse(ALL TYPE),Resistor、integrated circuit 、 Capacitor, ...
Get in touch with us
Leave a Message, we will call you back quickly!