High Efficiency Horticulture COB Led Grow Light Chip Dimmable Timer 100w

Product Specification

High efficiency horticulture lightning cob led grow light chip dimmable timer 100w led grow light diy

1,Features

• Efficacy of >130 lm/W typical for 6000K, 70CRI(PB)

• Efficacy of 140 lm/W typical for 6000K, 70CRI(P6)

• Copper base, thermal conductivity is 122-176W/(m·K) • Emitting diameter against 80kg pressure
• Minimum 70, 80 CRI options
• ENERGY STAR® / ANSI compliant color binning structure with 3 and 5 SDCM standard
• More energy efficient than incandescent, halogen and fluorescent lamps
• Product series and company logo on the front • RoHS compliant

2 Advantages
• High stability for outdoor application
• Significantly reduced thermal resistance and increased operating temperature
• Uniform, consistent white light • Lower operating cost • Easy to use with daylight and motion detectors to enable increased energy saving
• Reduced maintenance cost • Environmentally friendly, no disposal issue

2, Product Nomenclature

The part number designation for TYF Outdoor (OD) Series LED arrays is explained as follows:

3, Maximum Ratings

4, Applications:

5. Optical properties

5.1 Color Binning Information

Figure 1: Graph of Test Bins in xy Color Space (Pulsed Test Conditions, Tj = 25°C)

CIE1931-x

Table 38: 2-Step to 5-step MacAdam ellipse color bin definitions for TYF CoB Core Range

6, Absolute Maximum Ratings

6.1 Table 39: Maximum Ratings

Notes for Table 12:

• Driven the arrays at higher currents however lumen maintenance may be reduced.
• Proper current derating must be observed to maintain junction temperature below the maximum
• Pulsed operation with a peak drive current equal to the stated peak pulsed forward current is acceptable if the pulse on-time is ≤1ms per cycle and the duty cycle is ≤10%
• Light emitting diodes are not designed to be driven in reverse voltage and will not produce light under this condition. Maximum rating provided for reference only.

7, Mechanical Dimension

Notes: 1. All dimension tolerance is ±0.2mm unless otherwise noted. 2. Tc measurement point at cathode

8, CAUTION

RECOMMENDED SOLDERING CONDITION

For manual soldering. Please use lead-free soldering and the soldering shall be implemented using a soldering bit at a

temperature lower than 350C, and shall be finished within 3.5 seconds for one land. No external force shall be applied

to resin part while soldering is implemented. Next process of soldering should be carried out after the product has

return to ambient temperature. CAUTION: TEMPERATURE CONTROL

9,Packaging and Labeling

Product Packing and Labeling