Zhuzhou TGC Cemented Carbide Co.,Ltd.
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 5000kgs per month |
| Delivery Time | Standard products in one week |
| Packaging Details | plastic box/box + Cartons |
| Material | 12% Cobalt |
| ISO Grade | K30-K50 |
| Diameter | 10mm |
| Leght | 80mm |
| Tolerance | h6/h5 |
| Surface Roughness | Ra 0.2 |
| Circularity | 0.02 |
| straightness | 0.02 |
| Density | 14.12 |
| Hardness HV30 | 92.5 |
| T.R.S | 4200 |
| Grain size | 0.4 |
| Brand Name | OUQI |
| Model Number | Endmills blanks |
| Certification | ISO9001:2008 ISO14001:2004 |
| Place of Origin | China |
View Detail Information
Explore similar products
0.3μM Cemented Solid Carbide Cutting Tools Round Bars HRA 93.5 End mills Blank
Fine Grain Cemented Carbide Milling Blanks Rods Ø4×40mm h6 h5 Tolerance
Cemented Carbide Engraving Cutter End Mill HRA 94 Wear Resistance
0.7μM Cemented Carbide Milling Blanks Endmill K40 OD 2.35mm Fine Grain Size
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | 5000kgs per month |
| Delivery Time | Standard products in one week | Packaging Details | plastic box/box + Cartons |
| Material | 12% Cobalt | ISO Grade | K30-K50 |
| Diameter | 10mm | Leght | 80mm |
| Tolerance | h6/h5 | Surface Roughness | Ra 0.2 |
| Circularity | 0.02 | straightness | 0.02 |
| Density | 14.12 | Hardness HV30 | 92.5 |
| T.R.S | 4200 | Grain size | 0.4 |
| Brand Name | OUQI | Model Number | Endmills blanks |
| Certification | ISO9001:2008 ISO14001:2004 | Place of Origin | China |
| High Light | HRA92.5 Cemented Carbide Milling Blanks ，12% Cobalt Cemented Carbide Milling Blanks | ||
Cemented Carbide Milling BlanksHRA92.5 cemented carbide milling blanks for reamer making end mills
| ISO | Grain size | Cobalt | Density | Hardness | T.R.S | k1C |
| Code | μm | % | g/cm3 | HRA | N/mm2 | Mpa.m1/2 |
| K40-K50 | 0.4 | 12 | 14.12 | 92.5 | 4200 | 10.2 |
Application: Ultra-fine grain size, with good wear-resistant and toughness, especially suitable for finishing and processing alloy steel, aluminum alloy, titanium alloy etc. Suitable for making end mills and reamer.
| Diameter mm | Length mm | Diameter mm | Length mm | |||||
| D | Tolerance | L | Tolerance | D | Tolerance | L | Tolerance | |
| 1.60 | +0/-0.006 | 20 | 0/+0.5 | 10.00 | +0/-0.009 | 50 | 0/+0.5 | |
| 2.35 | 30 | 0/+0.5 | 10.00 | 70 | 0/+0.5 | |||
| 2.35 | 45 | 0/+0.5 | 10.00 | 72 | 0/+0.5 | |||
| 3.00 | 60 | 0/+0.5 | 10.00 | 75 | 0/+0.5 | |||
| 4.00 | +0/-0.008 | 40 | 0/+0.5 | 10.00 | 80 | 0/+0.5 | ||
| 4.00 | 46 | 0/+0.5 | 10.00 | 90 | 0/+0.5 | |||
| 4.00 | 50 | 0/+0.5 | 10.00 | 100 | 0/+0.5 | |||
| 4.00 | 60 | 0/+0.5 | 12.00 | +0/-0.011 | 70 | 0/+0.5 | ||
| 4.00 | 75 | 0/+0.5 | 12.00 | 79 | 0/+0.5 | |||
| 4.00 | 100 | 0/+0.5 | 12.00 | 83 | 0/+0.5 | |||
| 5.00 | 50 | 0/+0.5 | 12.00 | 100 | 0/+0.5 | |||
| 5.00 | 60 | 0/+0.5 | 12.00 | 120 | 0/+0.5 | |||
| 5.00 | 100 | 0/+0.5 | 13.00 | 100 | 0/+0.5 | |||
| 6.00 | 40 | 0/+0.5 | 14.00 | 75 | 0/+0.5 | |||
| 6.00 | 50 | 0/+0.5 | 14.00 | 80 | 0/+0.5 | |||
| 6.00 | 58 | 0/+0.5 | 14.00 | 83 | 0/+0.5 | |||
| 6.00 | 60 | 0/+0.5 | 14.00 | 100 | 0/+0.5 | |||
| 6.00 | 67 | 0/+0.5 | 16.00 | 80 | 0/+0.5 | |||
| 6.00 | 75 | 0/+0.5 | 16.00 | 90 | 0/+0.5 | |||
| 6 | 100 | 0/+0.5 | 20.00 | +0/-0.013 | 100 | 0/+0.5 | ||
| 8 | +0/-0.009 | 50 | 0/+0.5 | |||||
| 8 | 60 | 0/+0.5 | ||||||
| 8 | 63 | 0/+0.5 | ||||||
| 8 | 75 | 0/+0.5 | ||||||
| 8 | 90 | 0/+0.5 | ||||||
| 8 | 100 | 0/+0.5 | ||||||
| General tolerance for the h6 finished ground solid carbide rods | ||||||||||
| Diameter | Tolerance μm | Length | Tolerance | Straightness | Tolerance | Circularity | Tolerances | |||
| ＜3.0 | -6/0 | ＜100.0 | +0.5/+1.0 | ＜4.0 | 0.07 | <3,0 | 2,0 micron | |||
| 3.0-6.0 | -8/0 | 100.0-165.0 | +1.0/+2.5 | 4.5-5.0 | 0.06 | 3,0- 6,0 | 2,5 micron | |||
| 6.0-1.0 | -9/0 | 165.0-335.0 | +1.0/+6.0 | 5.5-12 | 0.05 | 6,1-10,0 | 3,0 micron | |||
| 10.0-18.0 | -11/0 | ＞12.5 | 0.04 | 10,1-18,0 | 3,5 micron | |||||
| 18.0-30.0 | -13/0 | 18,1- 30,0 | 4,0 micron | |||||||
| 30.0-50.0 | -16/0 | 30,1- 50,0 | 5,0 micron | |||||||
| General tolerance for the h5 finished ground solid carbide rods | ||||||||||
| Diameter | Tolerance μm | Length | Tolerance | Straightness | Tolerance | Circularity | Tolerances | |||
| ＜3.0 | -4/0 | ＜100.0 | +0.5/+1.0 | ＜4.0 | 0.07 | <3,0 | 2,0 micron | |||
| 3.0-6.0 | -5/0 | 100.0-165.0 | +1.0/+2.5 | 4.5-5.0 | 0.06 | 3,0- 6,0 | 2,5 micron | |||
| 6.0-1.0 | -6/0 | 165.0-335.0 | +1.0/+6.0 | 5.5-12 | 0.05 | 6,1-10,0 | 3,0 micron | |||
| 10.0-18.0 | -8/0 | ＞12.5 | 0.04 | 10,1-18,0 | 3,5 micron | |||||
| 18.0-30.0 | -9/0 | 18,1- 30,0 | 4,0 micron | |||||||
| 30.0-50.0 | -11/0 | 30,1- 50,0 | 5,0 micron | |||||||
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Seller
Year Established:
2013
Total Annual:
1000000-5000000
Employee Number:
50~100
Ecer Certification：
Site Member
Zhuzhou TGC Cemented Carbide Co., Ltd. is a Sino-foreign joint venture established in 2013 and located in GECKOR Xinma Industrial Park in Tianyuan District, Zhuzhou, where there are well-developed traffic and logistics and modern standard workshops. The company is mainly engaged in th... Zhuzhou TGC Cemented Carbide Co., Ltd. is a Sino-foreign joint venture established in 2013 and located in GECKOR Xinma Industrial Park in Tianyuan District, Zhuzhou, where there are well-developed traffic and logistics and modern standard workshops. The company is mainly engaged in th...
Get in touch with us
Leave a Message, we will call you back quickly!