Push Bending Type Automated Pipe Bender CNC80RHS Steel Pipe Bending Machine

Product Specification

CNC80RHS Tube bender

Advantages:

1. Low cost for operator training,high production effeciency and product uniformity.

2. Drived by electric servo motors.compared with hydraulic drive,it has higher stability and longer lifetime.It is unnecessary to worry about oil-leak or working temperature.

3. Gapless tube bending,with long-time high precision and processing efficiency,easy for operation.It has good compatibility.

4. Small in size,low noise level

5. Low running cost,with best cost performance for tube processing.

6. Widely used in small-diameter tube processing,for example tubes of air conditioner and oil tube for autos

Standard models:1~5 stacks,4~6 servo motors

Advanced motor:11 fully electric servo motors

Applications:

Auto,motorbike,aircraft,bicycle,kids bike,fitness equipment,furniture,outdoor equipment,air conditioner,food machinery,nulcear tube such as reactor,evaporator and heat exchanger

Features

1. Automatic 3D simulation function for detecting interferring position is selected as required.

2. All processing data are inputted by the touch screen

3. Based on the change of materials,each curve is set with a compensation value,a speed and a demoulding gap.

4. Each curve of one tube can be programmed with five action sequences and ten-stage speeds,so that the processing efficiency is improved,and the interference point is reduced.

5. Chinese/English language are switched to display on the touch screen,and customers can also purchase the machine installed with other languages

6. The feeding mode comprises the clamping feeding mode or the direct feeding mode which is selected as required.

7. The X.Y.Z coordinate can be automatically switched into the Y.B.C processing values

8. After the data are compiled,the data is protected by a key,so that the data are prevented from any modification.

9. The electric control system is equipped with a heat exchanger for automatic heat dissipation;if necessary,a numerical control type refrigerator can be additionally bought,so that the life span of the electric control system is ensured.

10. An automatic oil charging system is installed to reduce friction of the bending tube.It prolongs the lifetime of the core rod and improves the quality of the bended tube.

11. The machine can be connected with a printer so as to print the data displayed on the screen.

12. Communication interface can be installed as required,which can be connected to our company.Our engineer will provided remote service of real-time monitoring,data updating,failure checking and so on.

13. A feeding cart’s feeding position,safety position,wheel mode interfering position and guided mode interfering position are set,so that a hand wheel pulse wave generator can be finely tuned,the position can be automatically remembered,and the error caused by the manual measurement and the loss caused by the feeding cart bumping the machine are eliminated

14. The feeding shaft will perform automatic detection before acting,so that the feeding shaft is avoided from bumping the machine

15. When the curves are tested,analytical actions can be used,the actions are modified by the careful observation of the interference points ,so that the efficiency is improved.