NISSAN Fuso 3752133g25 Propeller Shaft In Automobile

Product Specification

NISSAN Fuso 3752133g25 Propeller Shaft In Automobile

Truck Propeller Shaft Drive rubber Support Center Bearing for NISSAN fuso 3752133g25 made in China

3752156G25 3752133G25 C752156G27 3752134G25 Center Bearing for 1989-1997 Nissan Pathfinder 1986-1994 Nissan D21 Pickup
DRIVE SHAFT CENTER SUPPORT BEARING 37521-33G25/37521-36G25 Engine Mount for Japanese Cars
37521 – 33g25 / 3752133g25 – Center bearing SUPPORT for Nissan
Propshaft Centre Bearing 3752133G25 3752156G25 3752156G27

(1) The reason for the damage of the hanger bearing is the lack of lubricating oil in the bearing, which causes the bearing to wear or ablate and loosen, or because of disrepair for a long time, the outer diameter of the bearing and the seat hole are rotated loose, and the rubber ring around the bearing seat Cracking or falling off, etc., cause the drive shaft to jump in the hanger, causing the lower half of the hanger to break, the bolts to break, and the bolt joints to break.

(2) The cause of the damage of the transmission shaft components is the deformation of the front and rear transmission shafts, the universal joint shaft fork, the joint flange, and the extension joint keyway shaft, which causes the axis swing difference when the entire transmission shaft is driven; or the lack of slippage of the universal joint Excessive wear and looseness caused by oil; or aggravated wear and looseness between the sliding joint groove and the groove due to the expansion joint. When the whole set of transmission shafts are in transmission, the gap is increased and axis vibration occurs, and the center hanger is affected by the shock for a long time and the lower part is broken.

(3) The central hanger of the transmission shaft of the truck has kept the center bracket of the bearing seat (tile frame) type on the middle beam in the automobile since the 1940s. The material is casted with malleable cast iron (ma steel). This structure The hanger is only suitable for trucks with relatively low tonnage (some modern drive shaft center brackets are made of steel plate rolled and welded, and are fitted in the middle beam, which is more secure). The cast hanger is prone to fracture layer due to improper technology, loose metal or pores, and brittle material. During the warranty installation of the center hanger, due to the improper method of tightening the bolts, the hanger or hanger cover is not installed evenly and evenly, so that the hanger or hanger cover is tilted, and a certain point of stress is concentrated and breaks. The frame is broken.

Our advantages :

1. All parts come with a 1-year warranty to provide meticulous customer service.

2. Only the best high-quality carbon steel is used. All metal-containing parts use high-cost heat treatment processes to improve the toughness and performance of the metal, and our parts use more advanced polishing processes to make the bearing roll smoother and longer.

3. Each independent component of this part uses high-quality materials. The difference between competitors is that they only use high-quality natural rubber (75%) and (25%) synthetic rubber. This means that the product is more durable and durable and can handle temperatures from-40 to + 140 degrees. This rubber will not leave a black mark on you like cheap alternative parts provided by competitors

Image description: