Xi'an Yunyi Instrument Co., Ltd
| Payment Terms | T/T, Western Union |
| Supply Ability | 100pcs per week |
| Delivery Time | 10 work days |
| Packaging Details | Carton Packaging |
| Product name | Tuning Fork Density Meter |
| Density range | 0-3 g / CM3 (3 /2.5/ 2 /1.5/ 1) |
| Accuracy | 0.001 g / cc, with a resolution of 0.0001 g / cc |
| Operating temperature range | -50 ℃ ~ + 200 ℃ |
| Output | 4-20 mA 4-wire ( 2-wire system can not be used) |
| Maximum working pressure | 20Mpa |
| Brand Name | Yunyi |
| Model Number | DMF-1-CR |
| Certification | CE |
| Place of Origin | China |
View Detail Information
Explore similar products
Fast Solid Density Meter Digital Electric Solid Glass PVC Rubber Granular
4 - 20mA Turing Line Fork Density Meter Transmitter
Plug In Tuning Fork Density Meter With Digital Display Sensor
Digital Industrial Tuning Fork Fuel Density Meter For Liquids
Product Specification
| Payment Terms | T/T, Western Union | Supply Ability | 100pcs per week |
| Delivery Time | 10 work days | Packaging Details | Carton Packaging |
| Product name | Tuning Fork Density Meter | Density range | 0-3 g / CM3 (3 /2.5/ 2 /1.5/ 1) |
| Accuracy | 0.001 g / cc, with a resolution of 0.0001 g / cc | Operating temperature range | -50 ℃ ~ + 200 ℃ |
| Output | 4-20 mA 4-wire ( 2-wire system can not be used) | Maximum working pressure | 20Mpa |
| Brand Name | Yunyi | Model Number | DMF-1-CR |
| Certification | CE | Place of Origin | China |
Tuning fork density meter is the introduction of foreign advanced frequency tracking technology and the production of high-precision, high applicability vibration principle density meter, product design using plug-in installation, widely used in pipelines, open tank containers and closed tank containers In the medium density testing.
Tuning fork density meter sensor is composed of two piezoelectric crystals, one piezoelectric vibration, the other piezoelectric crystal vibration detection, tuning fork sensor built-in temperature sensor, the piezoelectric crystal vibration temperature compensation.
| Density range : | 0-3 g / CM3 (3 /2.5/ 2 /1.5/ 1) |
| Output: | 4-20 mA 4-wire ( 2-wire system can not be used) |
| Accuracy: | 0.001 g / cc, with a resolution of 0.0001 g / cc |
| Insertion depth : | (flange distance to the end of the fork, minimum 125 mm, up to 2 meters) |
| Wetted material: | stainless steel, Hastelloy C22, 400 manganese alloys, titanium, etc. |
| Fork Coating: | standard, PTFE or electrolytic polishing |
| Power supply: | 20 - 28 VDC, 35 - 45mA |
| Operating temperature range: | -50 ℃ ~ + 200 ℃ |
| Maximum working pressure: | 20Mpa |
| Fluid viscosity range: | 0 - 20000 cP |
| Temperature coefficient: | 0.1 kg / m3 / ℃ (corrected) |
| Process connection: | 1.5 "NPT threaded connection; DIN 50 PN40 and PN100 flange connection; |
| Protection: | IP65 |
| Display: | Up density value, the density value can be switched to kg / cubic meter or g / cc by unit keys. Down display a temperature value (measured medium temperature ) temperature is original PT1000 |
| Accessory: | temperature of 4-20mA output signal |
The internal circuit board with automatic filtering function, other vibrations like pipe vibrations can eliminate away from the side of circuit and software,which ensure accuracy.
1.Adopting Germany piezoelectric ceramic piece, crossing gold process for ceramic piece to increase the inoxidizability of ceramic piece, thus increasing the service life of densitometer.
2.Fork vibration original piece adopts Japan's high performance original piece, in which installed 24 AD converter, and the accurate recognition for frequency is 0.01HZ, to ensure the sensitivity and accuracy of density.
3.Fork density calibration adopts national density standard solution, to ensure the source and accurate of density.
4.The current circuit is independent of fork vibration circuit, there is isolating anti-interference inner, reducing the influence to instrument from disturb.
5.There is set density three point quick calibration, range adjust, current calibration etc function, to meet on-site working demands.
6.Using high precision measuring density, is mainly used in power plant.
7.Can not be affected by temperature, pressure and flow rate , the factor affecting measuring error Is less.
1.Measurement of the density (concentration) of ore pulp in the process of ore dressing density (concentration) during coal feeding process;
2.Measurement of syrup density (concentration)
3.Measurement of starch emulsion density (concentration) (dry matter mass)
4.Desulfurization project lime slurry density (concentration) measurement, alarm
5.Denitration project ammonia density (concentration) measurement
6.Pharmaceutical industry concentrated solution density (concentration) measurement
7.Alcohol and water surface density (concentration) measurement
8.Various types of pipeline or tank density (concentration) measurement
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2007
Total Annual:
1000000-2000000
Employee Number:
150~200
Ecer Certification：
Verified Supplier
YUN YI ,we are professional manufacturer that engaged in the fields of pressure measurement instrument. we have 12 years sensor producing and developing experiences Xi'an Yunyi Instrument Co., Ltd is a professional R&D center and manufacture of measuring instruments.And here's a vari... YUN YI ,we are professional manufacturer that engaged in the fields of pressure measurement instrument. we have 12 years sensor producing and developing experiences Xi'an Yunyi Instrument Co., Ltd is a professional R&D center and manufacture of measuring instruments.And here's a vari...
Get in touch with us
Leave a Message, we will call you back quickly!