Back Painted CCC 5mm Refrigerator Door Panels

Product Specification

Professional Tempered Glass Sheet Back Painted Refrigerator Door Panels

Description of Refrigerator Door Panels:

When choosing refrigerators, air conditioners and other household appliances, people pay more and more attention to the appearance, because people will pay more attention to their collocation with the whole home, the overall coordination, color consistency and so on. This is especially true for household refrigerators, so more and more people will choose high-end color crystal glass door refrigerators. The unique mirror effect of glass door is needless to say, because its main body is made of toughened glass, so its scratch resistance and wear resistance are strong. Not only will the daily scratch and collision not leave traces, but also it will not be easily broken when encountering a strong frontal collision; in addition, the unique pigment layer inside the glass door allows it to have more color and texture effect than the metal panel. These advantages make the glass door refrigerator and steel door together, can better highlight its advantages.

Features of Tempered Glass Manufacturing Process

Has the unique gloss appearance, good light transmission.
Corrosion resistance , easy clean, various colors.
Different patterns can be made. Its flower pattern or metallic effect is clearly visible and beautiful
Tempered glass can be custom-made.

Sizes of toughened glass
Toughened glass is available in different sizes as per the requirement or use. The home appliance glass thickness generally ranges between 3mm, 4mm, 5mm, and 6mm. In the modern household appliance, glass is considered as one of the luxurious and elegant material, due to it’s unique gloss appearance, good light transmission. However, when it comes to safety, toughened glass is the most secure and reliable material which can be used for home appliance purpose. In the house or office, glass panel provides an attractive and unique look.

Quality Inspection process
1, When the first 100 pieces of finished products are packed, the quality inspector shall inspect them at the inspection point of finished products.
2, The product will be inspected two times casually every shift.
3, Before the product is packaged or after the finished product is repaired, the quality inspector shall inspect it at the finished product inspection point.
4, After the product is packaged, the quality inspector will inspect it at the finished product inspection point.
5, If the finished product is stored for more than one month or for other special reasons, the warehouse administrator shall inform the quality inspector on duty to inspect it at the delivery site (visual inspection according to the standard and packaging scheme is in conformity).

Application
Widely used as household appliance parts/ appliance accessory for oven door, oven control panel, microwave oven door glass, refrigerator glass door, fridge shelf, air conditioner, dish-washing machine panel, washing machine lid, dishwasher door, stove panel, switch panel glass, electronic products panel, kitchen electronic scale, electronic weighing scale, switch panel, etc.

Main Equipments for manufacturing refrigerator door panels

Test for refrigerator door panels

1. Ultraviolet resistance, Paste 3M aluminum tape (model: fe281, thickness: About 0.1mm) on the front of the three samples to make them stick smoothly. The adhesive area of aluminum tape is about 1 / 3 of the total area, and then placed in the UV box. The UV lamp power is 1000W * 3, the main peak wavelength is 365nm, and the lamp tube is 450mm away from the tested sample. After irradiation for 6h, the surface evaluation of each sample is completed within 1h. The aluminum foil area and the non aluminum foil area of the contrast sample are observed by naked eyes. There should be no obvious color change between the area without aluminum foil and that with aluminum foil.
2. Anti-pollution performance, The pollution area of each pollutant should not be less than 15mm ~ 20mm ~ 20mm2. After covering with stripping for 18h, the pollutants fingerprints, black tea, coffee, soy sauce, edible vegetable oil, shoe polish, crayon, lipstick, marker pen were placed on the surface of the sample, and the pollutants were wiped off with gauze. The sample should have no visible color difference Red, the marking pen should be placed on the surface of the sample, and the contamination should be wiped off with gauze dipped in alcohol, and there should be no visible color difference.