3D Effect Toughened Glass 4mm Refrigerator Door Panels

Product Specification

New Trends 3D Effect Tempered Toughened Glass Refrigerator Door Panels

Description of Refrigerator Door Panels:

When many people buy a refrigerator, they will first carefully observe the product's appearance design. The refrigerator with beautiful appearance and unique design can attract people's attention. In the early days when the refrigerator technology was not developed, the enterprises focused on the refrigeration and refrigeration technology. With the maturity of the refrigerator technology, the refrigerator enterprises began to work hard on the material and technology of the refrigerator. The plastic panel was gradually replaced by the toughened panel and glass panel, and the appearance of the refrigerator became more and more fashionable.

Tempered Glass Manufacturing Process

Unlike annealed glass or what we know as “ordinary” glass, tempered glass does not break into large jagged shards that can cause serious injuries. Instead, it breaks into smaller granular pieces that are less likely to cause harm. This is why tempered glass is used in passenger vehicle windows, refrigerator trays, shower enclosures, microwave ovens, and other things we use on a regular basis.
Tempered glass is also much stronger than annealed glass. It undergoes a complex manufacturing process that toughens it both physically and thermally.

Features of tempered glass for refrigerator door panels.

1. Security: When the glass is external damage, Debris will become very small obtuse angle grains and difficult to cause harm to humans.
2. High strength: the impact strength tempered glass of the same thickness of ordinary glass 3 to 5 times more than the ordinary glass ,bending strength 3-5 times.
3. Thermal stability: Tempered glass has good thermal stability, can withstand the temperature is more than 3 times that of ordinary glass, can withstand 200 °C temperature changes.

Refrigerator door panels testing

1, Granularity test: two pieces of tempered glass are selected for each batch of glass to be tested, and the place where the center of the long side of the glass plate is 13mm higher than the bottom edge is taken as the breaking point (see figure). After the glass is broken, the two areas with the largest granularity are selected in a 50mm*50mm box for counting. The number of crack-free particles completely contained in the 50mm*50mm box must be ≥50, and the largest particle size must be ≤ 15 mm * 8 mm.
2, Impact test: drop a steel ball with a diameter of 51mm and a weight of 535g from the glass surface 648mm, and impact the center of the glass plate once to ensure that the glass does not break.
3, Thermal shock test: the tempered glass is heated to 287 5℃, and then immediately quenched with water (temperature 10 ~ 25℃) at the center of the glass plate, requiring the glass not to break.

Application
Widely used as household appliance parts/ appliance accessory for oven door, oven control panel, microwave oven door glass, refrigerator glass door, fridge shelf, air conditioner, dish-washing machine panel, washing machine lid, dishwasher door, stove panel, switch panel glass, electronic products panel, kitchen electronic scale, electronic weighing scale, switch panel, etc.

How to order refrigerator door panels
1. Contact our sales with detailed requirements/drawing/quantity, or just an idea or a sketch.
2. We check internally to see if it's producible, then provide suggestions and make samples for your approval.
3. Email us your official order, and send deposit.
4. We put the order into mass production schedule, and produce it as per the approved samples.
5. Process balance payment and advise us your opinion on safe delivery.
6. After sales service.